- 论坛徽章:
- 0
|
有台rp7410,换了PCI风扇后,重启系统,发现系统超慢,在event.log里边发现在了一些信息如下:
vent data from monitor:
Event Time..........: Tue Aug 2 19:01:33 2010
Severity............: INFORMATION
Monitor.............: dm_chassis
Event #.............: 1188
System..............: XXX
Summary:
Chassis Code incoming FIFO is full.
Description of Error:
Chassis Code Keyword CCI_FULL.
The buffer (FIFO) holding incoming reflected chassis codes is full. The
cell utilities hardware signals the PDC the buffer is full by setting a
bit in the Dillon Micro Status Register.
Probable Cause / Recommended Action:
Cause:
The PDC is hung and not reporting to the CCI work bit or the reflected
chassis codes are coming in so fast the PDC can't respond fast enough.
Action:
Look for failure information within the partition as to why PDC would
hang or not respond quickly. If this is the first occurrence, Reset.
If more than once, replace cell board. The physical location in the
chassis code should point to a root cell.
Additional Event Data:
System IP Address...: XXXXX
Event Id............: 0x4c73522f00000000
Monitor Version.....: A.01.00
Event Class.........: System
Client Configuration File...........:
/var/stm/config/tools/monitor/default_dm_chassis.clcfg
Client Configuration File Version...: A.02.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
None
Additional System Data:
System Model Number.............: 9000/800/rp7410
EMS Version.....................: A.03.20
STM Version.....................: A.38.00
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/dm_chassis.htm#1188
v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v
Chassis Log Timestamp : Tue Aug 2 19:10:33 2010
Chassis Code Encoded Field : 0x2060121035012fcf
Alert Level : 1 (Service processor alert, no failure detected,
forward progress logs and timer requests only.)
Source FRU : 3 (PDH)
Source FRU Detail : 5 (platform registers)
Source ID : 1 (platform dependent)
Event Detail : 0 (no problem detail )
Caller Activity : 2 (operation)
Caller Subactivity : 252 (unknown)
Activity Status : 15 (implementation dependent)
Reporting Entity Type : 6 (PDH controller)
Reporting Entity ID : 1
Data Type : 4 (physical location)
Message ID : 2
FRU Physical Location: 0x00ffff01ff00ff91
FRU Source = 9 (cell)
Source Detail = 1 (cell controller)
Cabinet Location = 0
Cell Location = 1
>---------- End Event Monitoring Service Event Notification ----------<
>------------ Event Monitoring Service Event Notification ------------<
Notification Time:
sent Event Monitor notification information:
/system/events/chassis/chassis_log is >= 1.
Its current value is INFORMATION(1).
Event data from monitor:
Event Time..........:
Severity............: INFORMATION
Monitor.............: dm_chassis
Event #.............: 1029
System..............:
Summary:
PDC is finished booting..
Description of Error:
Chassis Code Keyword BOOT_BOOT_COMPLETE.
This chassis code is sent immediately before the point where PDC branches
to ISL. It is the last chassis code sent by the monarch CPU in the core
cell before ISL runs and tells the system utilities that ISL is now
running in the partition.
Probable Cause / Recommended Action:
Cause:
Forward progress
Action:
None
Additional Event Data:
System IP Address...: XXXX
Event Id............: 0x4c73523d00000000
Monitor Version.....: A.01.00
Event Class.........: System
Client Configuration File...........:
/var/stm/config/tools/monitor/default_dm_chassis.clcfg
Client Configuration File Version...: A.02.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
None
Additional System Data:
System Model Number.............: 9000/800/rp7410
EMS Version.....................: A.03.20
STM Version.....................: A.38.00
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/dm_chassis.htm#1029
v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v
Chassis Log Timestamp :
Chassis Code Encoded Field : 0xa0004610af000065
Alert Level : 1 (Service processor alert, no failure detected,
forward progress logs and timer requests only.)
Source FRU : 10 (protection domain)
Source FRU Detail : 15 (unknown)
Source ID : 0 (platform dependent)
Event Detail : 0 (unknown)
Caller Activity : 0 (unspecified)
Caller Subactivity : 6 (implementation dependent)
Activity Status : 5 (implementation dependent)
Reporting Entity Type : 0 (system firmware)
Reporting Entity ID : 4
Data Type : 20 (major changes in system state)
Message ID : 6
Chassis Code Data Field : 0x0000000000000001
System State : 1 (boot complete)
LED Run : 0 (off (default))
LED Attention : 0 (unknown)
LED Stopped : 0 (off (default))
>---------- End Event Monitoring Service Event Notification ----------<
另外,高手请指导下, Look for failure information within the partition as to why PDC would
hang or not respond quickly. If this is the first occurrence, Reset.
If more than once, replace cell board. The physical location in the
chassis code should point to a root cell.
请问,这个PDC怎样reset,谢谢。 |
|