Telnet 到 AS/400 遇到的问题

xuguopeng

你的系统的安全级别是多少??

yokel

CWBCO1008  [Back to top]

Cause
The Service Mapper was successfully contacted on the server, but connecting to the specified application server on that server failed, probably because the host server is not running. The error code is specified.
Recovery
Verify that the host server is ready to receive connections by doing the following on the server:


Enter the NETSTAT command.
Select option 3, Work with TCP/IP connection status.
Search for an entry for which the Local Port is the name of the server application specified in the message. This name may be truncated for display in NETSTAT.
Press F14 (Display port numbers) and note what port number that server is using; also note what the state of the server is.

yokel

If you are having trouble starting the host socket servers, try the following:

Type STRHOSTSVR SERVER(*ALL) at the AS/400 command prompt.
If step 1 does not work, type ENDHOSTSVR SERVER(*ALL) to end the host socket servers, then try step 1 again.
If step 2 does not work, type NETSTAT at the AS/400 command prompt. Then select option 3. Work with TCP/IP connection status. Look for any jobs with TCP addresses beside them. End those jobs with option 4, then try step 1 again.

xuguopeng

说到底还是服务没起来呀,我也有过服务都起来了,但是还是连不上的情况,结果是重起了一下就好了.

kiscore

我有跟楼上一样的问题，返回的错误也一模一样，版主给解答下吧，非常感谢啦！！
cwbping  返回10061错误。