cisco 1700密ma po jie !~~

carberos

System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2001 by cisco Systems, Inc.
C1700 platform with 32768 Kbytes of main memory

按 ctrl+pause

monitor: command "boot" aborted due to user interrupt
rommon 1 >;
*** Reserved LVL 7 Interrupt ***
PC = 0xfff0bf7c, Vector = 0x500, SP = 0x80004de4

rommon 1 >;
rommon 1 >;
rommon 1 >; confreg


           Configuration Summary
   (Virtual Configuration Register: 0x2102)
enabled are:
load rom after netboot fails
console baud: 9600
boot: image specified by the boot system commands
      or default to: cisco2-C1700

do you wish to change the configuration? y/n  [n]:  y
enable  "diagnostic mode"? y/n  [n]:  y
enable  "use net in IP bcast address"? y/n  [n]:  n
disable "load rom after netboot fails"? y/n  [n]:  y
enable  "use all zero broadcast"? y/n  [n]:  n
enable  "break/abort has effect"? y/n  [n]:  n
enable  "ignore system config info"? y/n  [n]:  n
change console baud rate? y/n  [n]:  n
change the boot characteristics? y/n  [n]:  n


           Configuration Summary
   (Virtual Configuration Register: 0x8102)
enabled are:
diagnostic mode
console baud: 9600
boot: image specified by the boot system commands
      or default to: cisco2-C1700

do you wish to change the configuration? y/n  [n]:  n


You must reset or power cycle for new config to take effect
rommon 2 >; reset
               
System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2001 by cisco Systems, Inc.