hprx7640安装出的问题

cobra1220

我最近给一台安腾的rx7640安装系统 有2个cell板子 分了两个Npar 一个Npar带有光驱系统很快就装好了。还有一个npar装的5300 可是通过光驱引导的时候老是报这个错误，然后系统就重启重复这个过程。 请高手指教。谢谢。


Calling function e0000000010d34a0 for Shutdown State 8 type 0x2

Stored message buffer up to panic:
ine 1060 in /ux/core/kern/em/plat/psm/cec_hp_psm.c: cec_hp_dimm_pd_init: unexpected ACPI namespace layout
Line 1060 in /ux/core/kern/em/plat/psm/cec_hp_psm.c: cec_hp_dimm_pd_init: unexpected ACPI namespace layout
Line 1060 in /ux/core/kern/em/plat/psm/cec_hp_psm.c: cec_hp_dimm_pd_init: unexpected ACPI namespace layout
Line 1060 in /ux/core/kern/em/plat/psm/cec_hp_psm.c: cec_hp_dimm_pd_init: unexpected ACPI namespace layout
NOTICE: cachefs_link(): File system was registered at index 5.
NOTICE: nfs3_link(): File system was registered at index 8.
0 sba
0/0 lba
Initializing the Ultra320 SCSI Controller at 0/0/3/0. Controller firmware version is 01.03.35.65
0/0/3/0 mpt
Initializing the Ultra320 SCSI Controller at 0/0/3/1. Controller firmware version is 01.03.35.65
0/0/3/1 mpt
0/1 lba
0/1/1/0 PCItoPCI
Initializing the Ultra320 SCSI Controller at 0/1/1/0/4/0. Controller firmware version is 01.03.35.69
0/1/1/0/4/0 mpt
0/0/3/0.6 tgt
0/0/3/0.6.0 sdisk
0/0/3/0.7 tgt
0/0/3/0.7.0 sctl
Initializing the Ultra320 SCSI Controller at 0/1/1/0/4/1. Controller firmware version is 01.03.35.69
0/1/1/0/4/1 mpt
0/1/1/0/6/0 iether
0/1/1/0/6/1 iether
0/2 lba
fcd: Claimed HP AB378-60101 4Gb Fibre Channel port at hardware path 0/2/1/0 (FC Port 1 on HBA)
0/2/1/0 fcd
0/4 lba
fcd: Claimed HP AB378-60101 4Gb Fibre Channel port at hardware path 0/4/1/0 (FC Port 1 on HBA)
0/4/1/0 fcd
0/6 lba
0/0/3/1.7 tgt
0/0/3/1.7.0 sctl
Initializing the Ultra320 SCSI Controller at 0/6/1/0. Controller firmware version is 01.03.35.69
0/1/1/0/4/1.1 tgt
0/1/1/0/4/1.1.0 sdisk
0/6/1/0 mpt
0/1/1/0/4/0.7 tgt
0/1/1/0/4/0.7.0 sctl
0/1/1/0/4/1.5 tgt
0/1/1/0/4/1.5.0 sdisk
Initializing the Ultra320 SCSI Controller at 0/6/1/1. Controller firmware version is 01.03.35.69
0/1/1/0/4/1.7 tgt
0/1/1/0/4/1.7.0 sctl
0/6/1/1 mpt
0/8 lba
0/10 lba
0/12 lba
0/12/1/0 iether
0/14 lba
0/14/1/0 iether
120 processor
121 processor
250 pdh
250/0 ipmi
250/1 acpi_node
0/6/1/0.7 tgt
0/6/1/0.7.0 sctl
0/6/1/1.7 tgt
0/6/1/1.7.0 sctl
0/2/1/0.1 fcd_fcp
0/2/1/0.1.0.0.0 fcd_vbus
0/2/1/0.1.0.255.0 fcd_vbus
0/2/1/0.1.4.0.0 fcd_vbus
0/2/1/0.1.4.255.0 fcd_vbus
0/2/1/0.1.0.0.0.0 tgt
0/2/1/0.1.0.255.0.0 tgt
0/2/1/0.1.4.0.0.0 tgt
0/2/1/0.1.0.0.0.0.0 sctl
0/2/1/0.1.4.255.0.0 tgt
0/2/1/0.1.0.255.0.0.0 sctl
0/2/1/0.1.4.0.0.0.0 sctl
0/2/1/0.1.4.255.0.0.0 sctl
iether0: INITIALIZING HP AB290-60001 PCI/PCI-X 1000Base-T 2-port U320 SCSI/2-port 1000B-T Combo Adapter at hardware path 0/1/1/0/6/0
iether1: INITIALIZING HP AB290-60001 PCI/PCI-X 1000Base-T 2-port U320 SCSI/2-port 1000B-T Combo Adapter at hardware path 0/1/1/0/6/1
iether2: INITIALIZING HP AD331-60001 PCI/PCI-X 1000Base-T Adapter at hardware path 0/12/1/0
iether3: INITIALIZING HP AD331-60001 PCI/PCI-X 1000Base-T Adapter at hardware path 0/14/1/0
    Swap device table:  (start & size given in 512-byte blocks)
        entry 0 - auto-configured on root device; ignored - no room
WARNING: no swap device configured, so dump cannot be defaulted to primary swap.
WARNING: No dump devices are configured.  Dump is disabled.
Starting the STREAMS daemons-phase 1
Create STCP device files
Starting the STREAMS daemons-phase 2
     $Revision: vmunix:    B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $
Memory Information:
    physical page size = 4096 bytes, logical page size = 4096 bytes
    Physical: 4125544 Kbytes, lockable: 2839544 Kbytes, available: 3353588 Kbytes

init died with return value 31488.
Please check for init's execute permission,
init's location and the root partition's location.

System Panic:

panic: init died
Stack Trace:
  IP                  Function Name
  0xe00000000077a340  exit+0xec0
  0xe0000000007dd6e0  rexit+0x40
  0xe0000000006e8390  syscall+0x920
End of Stack Trace

linkstamp:          Fri Jul 14 16:22:17 MDT 2006
_release_version:   @(#) $Revision: vmunix:    B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $

sync'ing disks (0 buffers to flush): (0 buffers to flush):
0 buffers not flushed
0 buffers still dirty

*** A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.

ERROR:  No dump space is configured.  Physical memory will not be dumped.
ERROR:  Configured dump space is insufficient to hold dump metadata.
        Physical memory will not be dumped.

leelangco

no swap device configured

foolqiu

回复 2# leelangco


    貌似这个哥们是要用磁带回灌系统。这个报错可能只是个假象。

    楼主去报个800-810-7000吧。

    期待反馈！

liuliang9767

http://www.taocaibang.com/job.php?

mod=view&jid=62362
.net 开发工程师
ss
上海盛大网络发展有限公司
公司类型：民营公司 公司规模： ss
发布时间 ：2010-09-28 工作年限 ：1-3年（含）

工作方式 ：全职 薪金待遇 ：面议 性别要求 ：不

限 学历要求 ：本科 招聘人数 ：5 到期时间 ：

2010-10-28 户口要求 ：无要求