新手第一次装系统就遇到一个大问题！！！求帮助！！！

asdwaaa

装的是5.3的，之前机器有个系统，新手为了体验下所以在p630试验机上重装系统，在配置助手设置完毕后一直在
0513-059 The ctrmc Subsystem has been started. Subsystem PID is 15068.   
停止不动，无奈关机重启。
开机后代码如下，在那停住不动了~~~~~~~~

Elapsed time since release of system processors: 1 mins 59 secs







-------------------------------------------------------------------------------
                                Welcome to AIX.
                       boot image timestamp: 08:10 11/02
                 The current time and date: 08:40:42 11/02/2010
               number of processors: 2    size of memory: 4096MB
             boot device: /pci@400000000110/pci@2,4/scsi@1/sd@8:2
                     kernel size: 11936315; 32 bit kernel
-------------------------------------------------------------------------------

Saving Base Customize Data to boot disk
Starting the sync daemon
Starting the error daemon
System initialization completed.
Setting tunable parameters...complete
Starting Multi-user Initialization
Performing auto-varyon of Volume Groups
Activating all paging spaces
0517-075 swapon: Paging device /dev/paging00 is already active.
swapon: Paging device /dev/hd6 activated.

Tue Nov 2 03:42:46 CDT 2010
Automatic Error Log Analysis for sysplanar0 has detected a problem.
The Service Request Number is
  651-880: The CEC or SPCN reported an error. Report the SRN and the following
           reference and physical location codes to your service provider..

/dev/rhd1 (/home): ** Unmounted cleanly - Check suppressed
/dev/rhd10opt (/opt): ** Unmounted cleanly - Check suppressed
Performing all automatic mounts
Multi-user initialization completed
Checking for srcmstr active...complete
Starting tcpip daemons:
0513-059 The syslogd Subsystem has been started. Subsystem PID is 11358.
0513-059 The sendmail Subsystem has been started. Subsystem PID is 11614.
0513-059 The portmap Subsystem has been started. Subsystem PID is 7078.
0513-059 The inetd Subsystem has been started. Subsystem PID is 9588.
0513-059 The snmpd Subsystem has been started. Subsystem PID is 11870.
0513-059 The hostmibd Subsystem has been started. Subsystem PID is 10894.
0513-059 The snmpmibd Subsystem has been started. Subsystem PID is 4990.

Tue Nov 2 03:42:54 CDT 2010
Automatic Error Log Analysis for sysplanar0 reports the following:
ANALYZING SYSTEM ERROR LOG                                                651204
                        
A loss of redundancy on input power was detected.

Check for the following:
  1. Loose or disconnected power source connections.
  2. Loss of the power source.
  3. For multiple enclosure systems, loose or
     disconnected power and/or signal connections
     between enclosures.

Supporting data:
        Ref. Code:      10111520

Error log information:
          Date: Tue Nov  2 03:42:53 CDT 2010
          Sequence number: 10
          Label: EPOW_SUS_CHRP

0513-059 The aixmibd Subsystem has been started. Subsystem PID is 9882.
Finished starting tcpip daemons.
Starting NFS services:
0513-059 The muxatmd Subsystem has been started. Subsystem PID is 14476.
0513-059 The biod Subsystem has been started. Subsystem PID is 7866.
0513-059 The rpc.lockd Subsystem has been started. Subsystem PID is 10328.
Completed NFS services.
0513-059 The ctrmc Subsystem has been started. Subsystem PID is 12152.

ewhisper

微码低吧

asdwaaa

回复 2# ewhisper


    那台机器是p630的，

jnwwww

首选原因是微码。

asdwaaa

回复 4# jnwwww


    我查看了下机器微码 是：pSeries Firmware
                                 Version RG080425_d79e22_regatta


那我现在要做的是去官网下载更新版本的吗？还有这个微码是怎么辨别呢，呵呵，rg080425代表啥意思呢，去官网怎么去辨别哪个是更新的呢~~呵呵~~~

goldfishway

先说了  我也是菜鸟

我发现点问题

LZ你看看你的机器的LCD 是否已经没有什么显示了 假如是 那么机器已经进系统了

LZ 按下回车 看看是否登陆界面出现


看楼主贴出来的东西

电源好像报错呢

然后是 系统应该是装好了 然后 系统进不去 可能是串口未打开

goldfishway

解决办法啊

一个是开了机器的串口 能不能在sms里面开我也不知道
另外一个是加个显卡 用显示器 哈哈哈