- 论坛徽章:
- 0
|
回复 2# twinklezcf
![]()
我在给sun 4800安装系统的时候最后总是提示：No disks found。详细过程如下：
{8} ok probe-scsi-all
/ssm@0,0/pci@1c,600000/SUNW,qlc@1
Link not ready - Loss of Sync
*************************** Local Loop Devices ***************************
No local loop devices
/ssm@0,0/pci@1c,700000/pci@1/SUNW,isptwo@4
/ssm@0,0/pci@19,700000/pci@1/SUNW,isptwo@4
Target 0
Unit 0 Disk FUJITSU MAN3367M SUN36G 1703
Target 1
Unit 0 Disk FUJITSU MAN3367M SUN36G 1703
Target 2
Unit 0 Processor Sun D240 1.09
Target 3
Unit 0 Processor Sun D240 1.09
Target 4
Unit 0 Removable Tape HP C5683A C005
Target 6
Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M17111005
/ssm@0,0/pci@18,600000/SUNW,qlc@1
Link not ready - Loss of Sync
*************************** Local Loop Devices ***************************
No local loop devices
{8} ok boot cdrom
SunOS Release 5.10 Version Generic_141444-09 64-bit
Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
Configuring devices.
Using RPC Bootparams for network configuration information.
Attempting to configure interface hme1...
WARNING: hme1: fault detected in device; service degraded
WARNING: hme1: No response from Ethernet network : Link down -- cable problem?
Skipped interface hme1
Attempting to configure interface hme0...
WARNING: hme0: fault detected in device; service degraded
WARNING: hme0: No response from Ethernet network : Link down -- cable problem?
Skipped interface hme0
Attempting to configure interface qfe3...
NOTICE: SUNW,qfe3: No response from Ethernet network : Link Down - cable proble?
NOTICE: SUNW,qfe3: No response from Ethernet network : Link Down - cable proble?
Skipped interface qfe3
Attempting to configure interface qfe2...
NOTICE: SUNW,qfe2: No response from Ethernet network : Link Down - cable proble?
NOTICE: SUNW,qfe2: No response from Ethernet network : Link Down - cable proble?
Skipped interface qfe2
Attempting to configure interface qfe1...
NOTICE: SUNW,qfe1: No response from Ethernet network : Link Down - cable proble?
NOTICE: SUNW,qfe1: No response from Ethernet network : Link Down - cable proble?
Skipped interface qfe1
Attempting to configure interface qfe0...
NOTICE: SUNW,qfe0: No response from Ethernet network : Link Down - cable proble?
NOTICE: SUNW,qfe0: No response from Ethernet network : Link Down - cable proble?
Skipped interface qfe0
Reading ZFS config: done.
Setting up Java. Please wait...
Serial console, reverting to text install
Beginning system identification...
Searching for configuration file(s)...
Search complete.
Discovering additional network configuration...
Select a Language
0. English
1. French
2. German
3. Italian
4. Japanese
5. Korean
6. Simplified Chinese
7. Spanish
8. Swedish
9. Traditional Chinese
Please make a choice (0 - 9), or press h or ? for help: 0
What type of terminal are you using?
1) ANSI Standard CRT
2) DEC VT52
3) DEC VT100
4) Heathkit 19
5) Lear Siegler ADM31
6) PC Console
7) Sun Command Tool
 Sun Workstation
9) Televideo 910
10) Televideo 925
11) Wyse Model 50
12) X Terminal Emulator (xterms)
13) CDE Terminal Emulator (dtterm)
14) Other
Type the number of your choice and press Return: 3
Completing system identification...
in.rdisc: No interfaces up
?
......
哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪
System identification complete.
Starting Solaris installation program...
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
?Warning 哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪
No disks found.
> Check to make sure disks are cabled and
哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪哪
Solaris installation program exited.
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <drive type unknown>
/ssm@0,0/pci@19,700000/pci@1/SUNW,isptwo@4/sd@0,0
1. c0t1d0 <drive type unknown>
/ssm@0,0/pci@19,700000/pci@1/SUNW,isptwo@4/sd@1,0
Specify disk (enter its number): 0
AVAILABLE DRIVE TYPES:
0. Auto configure
1. Quantum ProDrive 80S
2. Quantum ProDrive 105S
3. CDC Wren IV 94171-344
4. SUN0104
5. SUN0207
6. SUN0327
7. SUN0340
8. SUN0424
9. SUN0535
10. SUN0669
11. SUN1.0G
12. SUN1.05
13. SUN1.3G
14. SUN2.1G
15. SUN2.9G
16. Zip 100
17. Zip 250
18. Peerless 10GB
19. other
Specify disk type (enter its number): 0
Auto configure failed
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> quit
很奇怪,在ok状态下执行probe-scsi-all,可以找到硬盘，在退出安装程序执行format命令也可以找到硬盘，就是在安装过程中找不到硬盘，这是为什么？哪位兄弟知道，请告诉我，多谢了！另外，哪位兄弟有solaris 9 sparc的安装盘，我想换个版本再试一下，在网上没找到可以下载的地方。
|
|
免费注册
发表于 2011-01-29 18:52
