论坛徽章:: 0

电梯直达

1楼 [收藏(0)] [报告]

发表于 2011-02-11 06:41 |只看该作者 |倒序浏览

cmd1a:/ ROOT # uname -a
SunOS cmd1a 5.9 Generic_118558-08 sun4u sparc SUNW,Netra-4

cmd1a:/ ROOT # /usr/local/bin/snmptrap -V
UCD-snmp version: 4.2.5

本机IP是: 172.26.164.4  远程主机IP是:172.26.164.71

从本机只能通过ssh 172.26.164.71 来登陆远程Solairs主机.

想通过如下命令将一段告警信息发给远程主机如何发送?  我尝试用如下命令,但是不对, 请教高人.

cmd1a:/ ROOT # /usr/local/bin/snmptrap -v 2c -c public -h 172.26.164.71 -m "warning information"
Usage: snmptrap [options...] <hostname> {<community>} [<trap parameters> ...]

UCD-snmp version: 4.2.5
  -h          this help message.
  -H          Display configuration file directives understood.
  -V          display version number.
  -v 1|2c|3    specifies snmp version to use.
SNMP Version 1 or 2c specific
  -c <c>       set the community name (v1 or v2c)
SNMP Version 3 specific
  -Z <B,T>    set the destination engine boots/time for v3 requests.
  -e <E>       security engine ID (e.g., 800000020109840301).
  -E <E>       context engine ID (e.g., 800000020109840301).
  -n <N>       context name (e.g., bridge1).
  -u <U>       security name (e.g., bert).
  -l <L>       security level (noAuthNoPriv|authNoPriv|authPriv).
  -a <A>       authentication protocol (MD5|SHA)
  -A <P>       authentication protocol pass phrase.
  -x <X>       privacy protocol (DES).
  -X <P>       privacy protocol pass phrase
General communication options
  -p <P>       use port P instead of the default port.
  -T <LAYER> use LAYER for the network layer.
                     (UDP or TCP).
  -t <T>       set the request timeout to T.
  -r <R>       set the number of retries to R.
Debugging
  -d          dump input/output packets.
  -D all | <TOKEN[,TOKEN,...]>  turn on debugging output for the specified TOKENs.
General options
  -m all | <MIBS>    use MIBS list instead of the default mib list.
  -M <MIBDIRS>  use MIBDIRS as the location to look for mibs.
  -P <MIBOPTS>  Toggle various defaults controlling mib parsing:
               MIBOPTS values:
                  u: allow the usage of underlines in mib symbols.
                  c: disallow the usage of "--" to terminate comments.
                  d: save the descriptions of the mib objects.
                  e: Disable mib errors of MIB symbols conflicts
                  w: Enable mib warnings of MIB symbols conflicts
                  W: Enable detailed warnings of MIB symbols conflicts
                  R: Replace MIB symbols from latest module
  -O <OUTOPTS>  Toggle various defaults controlling output display:
               OUTOPTS values:
                  n: Print oids numerically.
                  e: Print enums numerically.
                  E: Escape quotes in string indices.
                  X: Extended index format
                  b: Dont break oid indexes down.
                  q: Quick print for easier parsing.
                  f: Print full oids on output.
                  s: Print only last symbolic element of oid.
                  S: Print MIB module-id plus last element.
                  t: Print timeticks unparsed as numeric integers.
                  v: Print Print values only (not OID = value).
                  T: Print human-readable text along with hex strings.
  -I <INOPTS> Toggle various defaults controlling input parsing:
               INOPTS values:
                  R: Do random access to oid labels.
                  r: Don't check values for range/type legality.
                  b: Do best/regex matching to find a MIB node.
  -C <APPOPTS>  Toggle various application specific behaviour:
               APPOPTS values:
                  i: Send an snmp INFORM instead of an snmp TRAP.
  -v 1 trap parameters:
      enterprise-oid agent trap-type specific-type uptime [ var ]...
  or
  -v 2 trap parameters:
      uptime trapoid [ var ] ...