F4800找不到盘，检查了，没接错线，谁知道什么问题！急........

8894106

Entering OBP ...
ERROR: Device not found
LED write value = 0x2, 2
ERROR: /N0/IB8/P0/B1/C0 failed.
Sun Fire 4800
OpenFirmware version 5.16.0 (01/21/04 16:15)
Copyright 2001-2004 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
SmartFirmware, Copyright (C) 1996-2001.  All rights reserved.
8192 MB memory installed, Serial #50855281.
Ethernet address 0:3:ba:7:fd:71, Host ID: 8307fd71.
nvramrc script ERROR: Device not found
ERROR: No good IO boards available to boot OS!
{10} ok
{10} ok
{10} ok
{10} ok
{10} ok
f4800g:C> showb
Slot     Pwr Component Type                 State      Status     Domain
----     --- --------------                 -----      ------     ------
/N0/SB4  On  CPU Board V2                   Active     Passed     C
/N0/IB8  On  PCI I/O Board                  Active     Passed     C
f4800g:C>
f4800g:SC> showlogs
Jan 21 12:32:25 f4800g Platform.SC: [ID 827764 local0.notice] Boot: ScApp 5.16.0, RTOS 38
Jan 21 12:32:27 f4800g Platform.SC: [ID 945168 local0.notice] SBBC Reset Reason(s): Power On Reset
Jan 21 12:32:27 f4800g Platform.SC: [ID 183033 local0.notice] Initializing the SC SRAM
Jan 21 12:32:32 f4800g Platform.SC: [ID 595276 local0.notice] Clock Source: 75MHz
Jan 21 12:32:41 f4800g Platform.SC: [ID 565334 local0.notice] Chassis is in dual partition mode.
Jan 21 12:32:42 f4800g Platform.SC: [ID 530026 local0.notice] Main System Controller
Jan 21 12:32:44 f4800g Platform.SC: [ID 519431 local0.notice] NOTICE: FT0 has no grid power.
Jan 21 12:32:44 f4800g Platform.SC: [ID 519433 local0.notice] NOTICE: FT1 has no grid power.
Jan 21 12:32:44 f4800g Platform.SC: [ID 519435 local0.notice] NOTICE: FT2 has no grid power.
Jan 21 12:32:48 f4800g Platform.SC: [ID 386793 local0.notice] Cold boot detected: recovering active domains
Jan 21 12:32:48 f4800g Platform.SC: [ID 942133 local0.notice] Starting telnet server ...
Jan 21 12:32:48 f4800g Platform.SC: [ID 710711 local0.notice] SC Failover: disabled
Jan 21 12:33:52 f4800g Platform.SC: [ID 367268 local0.notice] Frame Manager monitoring is disabled, connection is down
Jan 21 12:37:07 f4800g Platform.SC: [ID 807377 local0.notice] FT0, fan speed, Low (4,1)
Jan 21 12:37:07 f4800g Platform.SC: [ID 696389 local0.notice] FT0, hotplug status, FT0, module inserted (9,17)
Jan 21 12:37:09 f4800g Platform.SC: [ID 431684 local0.notice] FT2, fan speed, Low (4,1)
Jan 21 12:37:09 f4800g Platform.SC: [ID 696902 local0.notice] FT2, hotplug status, FT2, module inserted (9,17)
Jan 21 12:37:11 f4800g Platform.SC: [ID 169540 local0.notice] FT1, fan speed, Low (4,1)
Jan 21 12:37:11 f4800g Platform.SC: [ID 825627 local0.notice] FT1, hotplug status, FT1, module inserted (9,17)
Jan 21 12:37:14 f4800g Platform.SC: [ID 187709 local0.notice] /N0/SB0, hotplug status, SB0, module inserted (9,17)
Jan 21 12:37:15 f4800g Platform.SC: [ID 188222 local0.notice] /N0/SB2, hotplug status, SB2, module inserted (9,17)
Jan 21 12:37:16 f4800g Platform.SC: [ID 921621 local0.error] /N0/IB8: SepromSegment(constructor): PE at 0x0038:  Invalid CRC observed=b6bce32b expected=b7bde32b
Jan 21 12:37:16 f4800g Platform.SC: [ID 188735 local0.notice] /N0/SB4, hotplug status, SB4, module inserted (9,17)
Jan 21 12:37:17 f4800g Platform.SC: [ID 946764 local0.notice] /N0/IB8, hotplug status, IB8, module inserted (9,17)
Jan 21 12:37:17 f4800g Platform.SC: [ID 421598 local0.notice] RP0, hotplug status, RP0, module inserted (9,17)
Jan 21 12:37:18 f4800g Platform.SC: [ID 422111 local0.notice] RP2, hotplug status, RP2, module inserted (9,17)
Jan 21 12:42:21 f4800g Platform.SC: [ID 945578 local0.notice] Domain Shell - C: setk on: Initiating keyswitch: on, domain C.

easybegin

ok  probe-scsi-all


估计你的启动硬盘是自定义写到PROM的，没保存，没法自动引导。

东方蜘蛛

ok devalias看看，你的D240是连到IB8上的么？

skaidhuf

westlife521

ok  probe-scsi-all


估计你的启动硬盘是自定义写到PROM的，没保存，没法自动引导。
easybegin 发表于 2011-03-15 15:48

    probe是硬道理

haishui

IB板子的路径感觉有问题，

o0不知火舞0o

nvramrc script ERROR: Device not found
ERROR: No good IO boards available to boot OS!
检查一下I/0板