在笔记本电脑上用 Linux 系统的同胞们进来下~~~

逸&moto163

我用的ubuntu，现在在win7下，一会到ubuntu下看看！

wang509020

我用的是TCL K20笔记本，不过我还不知道怎么去连接无线呀，所以我不发表问题。

hefang19880120

我也来学习一下，嘻嘻

hefang19880120

才来看看，呵呵，这里还不错吗？

机器猫II

中国linux有希望了，计算机就该这么玩

机器猫II

[root@localhost ~]# sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
执行过 sensors-detect
[root@localhost ~]# sensors-detect
# sensors-detect revision 4348 (2007-03-18 02:45:21 -0700)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): Y
Probing for PCI bus adapters...
Sorry, no known PCI bus adapters found.

We will now try to load each adapter module in turn.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.

Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): Y
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM78-J' at 0x290...     No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No
Probing for `Silicon Integrated Systems SIS5595'...         No
Probing for `VIA VT82C686 Integrated Sensors'...            No
Probing for `VIA VT8231 Integrated Sensors'...              No
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): Y
Probing for Super-I/O at 0x2e/0x2f
Trying family `ITE'...                                      Yes
Found unknown chip with ID 0x0e01
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     Yes
Found unknown chip with ID 0x0e01
Trying family `VIA/Winbond/Fintek'...                       No
Probing for Super-I/O at 0x4e/0x4f
Trying family `ITE'...                                      No
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Fintek'...                       No

Some CPUs or memory controllers may also contain embedded sensors.
Do you want to scan for them? (YES/no): Y
AMD K8 thermal sensors...                                   No
Intel Core family thermal sensor...                         No
Intel AMB FB-DIMM thermal sensor...                         No

Sorry, no sensors were detected.
Either your sensors are not supported, or they are connected to an
I2C or SMBus adapter that is not supported. See doc/FAQ,
doc/lm_sensors-FAQ.html or http://www.lm-sensors.org/wiki/FAQ
(FAQ #4.24.3) for further information.
If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.
[root@localhost ~]# sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.

机器猫II

我的笔记本dell  pp01L

为什么删我号

哥刚好也想尝试下，感谢分享

wens07

都是牛人， 学习

mafuli007

晕，我怎么一路回车或者yes不行啊，最后提示失败

启动 lm_sensors：
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
                                                           [失败]

首先确定我已经安装了，是自带安装的，帮我调好了我踩能测啊