vim+cscope+ctags源码安装

T-bagwell

首先安装cscope

[root@cutbag sys]#tar jxvf cscope-15.7a.tar.bz2
[root@cutbag sys]#cd cscope-15.7a
[root@cutbag sys]#./configure --prefix=/usr&&make&&make install
然后安装vim
[root@cutbag sys]#tar jxvf vim-7.2.tar.bz2
[root@cutbag sys]#GUI_INC_LOC="" GUI_LIB_LOC="" CC="" CPPFLAGS="" CFLAGS="-O2 -pipe " LDFLAGS="" srcdir="." ./configure --enable-cscope --prefix=/usr
[root@cutbag sys]#make&&make install
然后安装ctags
[root@cutbag sys]#tar zxvf ctags-5.8.tar.gz
[root@cutbag sys]#cd ctags-5.8
[root@cutbag sys]#./configure --prefix=/usr
[root@cutbag sys]#make&&make install
接着做一个脚本，专门用来生成源代码阅读工程的
[root@cutbag sys]#vi /bin/mktags.sh
[root@cutbag sys]#chmod u+x /bin/mktags.sh
脚本里的内容如下：
find . -name "*.c" -o -name "*.h" -o -name "*.cpp" > cscope.files
cscope -Rbkq -i cscope.files
ctags -R
Written by Liuqi
因为习惯，设置一下~/.vimrc

" When started as "evim", evim.vim will already have done these settings.
if v:progname =~? "evim"
  finish
endif
" Use Vim settings, rather then Vi settings (much
" This must be first, because it changes other options as a side effect.
set nocompatible
" allow backspacing over everything in insert mode
set backspace=indent,eol,start
if has("vms")
    set nobackup " do not keep a backup file, use versions instead
else
    set backup " keep a backup file
endif
set history=50 " keep 50 lines of command line history
set ruler " show the cursor position all the time
set showcmd " display incomplete commands
set incsearch " do incremental searching
" For Win32 GUI: remove 't' flag from 'guioptions': no tearoff menu entries
" let &guioptions = substitute(&guioptions, "t", "", "g")
" Don't use Ex mode, use Q for formatting
map Q gq
" CTRL-U in insert mode deletes a lot. Use CTRL-G u to first break undo,
" so that you can undo CTRL-U after inserting a line break.
inoremap  u
" In many terminal emulators the mouse works just fine, thus enable it.
" Switch syntax highlighting on, when the terminal has colors
" Also switch on highlighting the last used search pattern.
if &t_Co > 2 || has("gui_running")
    syntax on
    set hlsearch
endif
" Only do this part when compiled with support for autocommands.
if has("autocmd")
    " Enable file type detection.
    " Use the default filetype settings, so that mail gets 'tw' set to 72,
    " 'cindent' is on in C files, etc.
    " Also load indent files, to automatically do language-dependent indenting.
    filetype plugin indent on
    " Put these in an autocmd group, so that we can delete them easily.
    augroup vimrcEx
        
        " For all text files set 'textwidth' to 78 characters.
        autocmd FileType text setlocal textwidth=78
        " When editing a file, always jump to the last known cursor position.
        " Don't do it when the position is invalid or when inside an event handler
        " (happens when dropping a file on gvim).
        " Also don't do it when the mark is in the first line, that is the default
        " position when opening a file.
        autocmd BufReadPost *
                    \ if line("'\"") > 1 && line("'\"") = line("$") |
                    \ exe "normal! g`\"" |
                    \ endif
    augroup END
else
    set autoindent " always set autoindenting on
endif " has("autocmd")
" Convenient command to see the difference between the current buffer and the
" file it was loaded from, thus the changes you made.
" Only define it when not defined already.
if !exists(":DiffOrig")
    command DiffOrig vert new | set bt=nofile | r # | 0d_ | diffthis
                \ | wincmd p | diffthis
endif
set nu
let Tlist_Use_Right_Window=1
let Tlist_File_Fold_Auto_Close=1
map  :TlistToggle
noremap  :make
noremap  :make clean;make
noremap  :Tlist
noremap  :TlistSync
noremap  :!./vitags.sh:cs reset
noremap  :!cvs up
nnoremap  @=((foldclosed(line('.'))
if has("multi_byte")
    set encoding=utf-8
    set fileencoding=chinese
    set fileencodings=ucs-bom,utf-8,chinese
endif
set wrap
set hlsearch
filetype plugin on
colorscheme elflord
syntax on
set nocp
filetype plugin on
filetype indent on
set nu
set ts=4
set sw=4
set ru
set hls
set is
set sm
set cin
set cino=:0g0t0(sus
set autoread " read open files again when changed outside Vim
set incsearch " use incremental search
set nowrap " do not wrap lines
set nobackup
set nowritebackup


本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u3/101042/showart_2096683.html