centos5.3上安装virtualbox3.0.2失败

rogermm

我在 X86_64 硬體架構上安装centos5.3，kernel为2.6.18-128.el5
安装VirtualBox-3.0.2_49928_rhel5-1.i386.rpm失败。
提示如下：
No precompiled module for this kernel found -- trying to build one. Messages
emitted during module compilation will be logged to /var/log/vbox-install.log.

Compilation of the kernel module FAILED! VirtualBox will not start until this
problem is fixed. Please consult /var/log/vbox-install.log to find out why the
kernel module does not compile. Most probably the kernel sources are not found.
Install them and execute

/etc/init.d/vboxdrv setup

as root.

[root@localhost src]# /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel module [确定]
Recompiling VirtualBox kernel module [失败]
(Look at /var/log/vbox-install.log to find out what went wrong)

[root@localhost src]# cat /var/log/vbox-install.log
Makefile:147: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again。停止。

不知怎么解决，请教？
谢谢！

unixlinuxsys

No precompiled module for this kernel found

mingwjj

我也遇到同样的问题，重新安装了核心包还是提示这样的问题喔！
哪位高手指点下呢？
谢谢。。。

kns1024wh

此类问题需要重新编译内核

maluyao

多数时候装上kernel-devel 包即可。

原帖由 unixlinuxsys 于 2009-7-30 19:35 发表
No precompiled module for this kernel found

mingwjj

多谢大家呵，努力学习。