用Serviceguard 在REDHAT5上做双机 错误

shunix

用Serviceguard 在REDHAT5(虚拟机)上做双机 报下面错误
NOde host1 is refusing Serviceguard communication.
Please make sure that the proper security access is configured on node
host1 through either file-based access (pre-A.11.16 version) or role-based
access (version A.11.16 or higher) and/or that the host name lookup
on node host1 resolves the IP address correctly.
cmcheckconf: Failed to gather configuration information

何解啊?
一个闷头研究太痛苦了,大侠们帮帮忙!

unixlinuxsys

Please make sure that the proper security access is configured on node

nntp

MC/SG for linux 10月31日全球停产.

shunix

the proper security  在哪里配置
我主要是想在LINUX上模拟下MC/SG
因为我从事的是HP-UX
没有实验环境

shunix

somebody HELP!!!

shunix

upupupupupup  有人来帮下吗？

ucdos2003

11.19刚出来不久,消息可靠吗?没有听HP说过呀!

ucdos2003

Configuration on xx02.xxx.com [ Sat Jul  4 02:41:22 2009 ]:
----------------------------------------------------------------------
1 : parsing of the user input file successful
        Started verifying /etc/services file.....

        Verification of service file completed successfuly.
2 : Confirmed that the ports required by SG are free
        NOTE:
        identd          0ff   1ff   2ff   3ff   4ff   5ff   6ff
        This is the original runlevel setting of identd
        NOTE: /sbin/chkconfig --level 35 identd on
        NOTE: /etc/init.d/identd restart
        identd Service has started successfully
3 : Successfully started identd service
        NOTE:
        xinetd          0ff   1ff   2ff   3:on    4:on    5:on    6:off
        This is the original runlevel setting of xinetd
        NOTE: /sbin/chkconfig --level 01246 xinetd off
        NOTE: /etc/init.d/xinetd restart
        xinetd Service has started successfully
4 : Successfully started xinetd service
5 : '. /etc/cmcluster.conf' and PATH added in /etc/profile.d/sg_profile.sh file
        NOTE: Backed up /etc/man.config to /etc/man.config.original
        NOTE: Added MANPATH /usr/local/cmcluster/doc/man
to /etc/man.config
6 : updated the SG MANPATH in /etc/man.config file
        NOTE: Backed up /usr/local/cmcluster/conf/cmcluster.rc to /usr/local/cmcluster/conf/cmcluster.rc.original
        Changes to $SGCONF/cmcluster.rc completed successfully
7 : changed the AUTOSTART_CMCLD parameter value to 1
        NOTE: Backed up /etc/hosts to /etc/hosts.original
        NOTE: Made the following entries in /etc/hosts

8 : /etc/hosts file updated successfully
        NOTE: The hosts entry in the /etc/nsswitch.conf is
        hosts:      files dns
        This format is not compatible for running Serviceguard
        NOTE: Backed up the /etc/nsswitch.conf to /etc/nsswitch.conf.original
        NOTE: The hosts entry in /etc/nsswitch.conf has been changed to
        hosts:     files [NOTFOUND=continue UNAVAIL=continue] dns [NOTFOUND=return UNAVAIL=return]
9 : Confirmed entry for hosts in /etc/nsswitch.conf
        NOTE: Backed up /etc/lvm/lvm.conf to /etc/lvm/lvm.conf.original
10 : Updated the /etc/lvm/lvm.conf and /etc/lvm/lvm_kx02.conf files
        WARNING: Firewall is disabled
        You may consider starting the iptables service to setup the firewall.
                -> service iptables start
        would allow iptables to be turned on till the next reboot.
        To start the Serviceguard firewall rules, execute the following:
                -> /etc/init.d/sgfirewall start
        Or configure iptables to start at boot time by using -
                -> /sbin/chkconfig --level 35 iptables on
        WARNING: Firewall script setup was not completely successful. Please check /etc/init.d/sgfirewall again.

        SUCCESS : The system configuration on the remotenode kx02.kx.com completed  with 2 warning(s)

        The logfile is located at /tmp/sg_configscript.log




Script completed on 02.xxx.com

        SUCCESS : The system configuration completed with 2 warning(s)

        The logfile is located at /tmp/sg_configscript.log