- 论坛徽章:
- 0
|
VIVI version 0.1.4 (eady@eady.mizi.com) (gcc version 2.95.3 20010315 (release))3MMU table base address = 0x33DFC000
Succeed memory mapping.
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)
Could not found stored vivi parameters. Use default vivi parameters.
Press Return to start the LINUX now, any other key for vivi
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x000c0000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/bon/2 init=/linuxrc console=ttyS0"
MACH_TYPE = 193
NOW, Booting Linux......
Uncompressing Linux............................................... done, bootin.Linux version 2.4.18-rmk7-pxa1 (root@eady.mizi.com) (gcc version 2.95.2 20000513CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0
Machine: Samsung-SMDK2410
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: noinitrd root=/dev/bon/2 init=/linuxrc console=ttyS0
DEBUG: timer count 15626
Console: colour dummy device 80x30
Calibrating delay loop... 99.94 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62880KB available (1229K code, 295K data, 60K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock = 200.000 Mhz, HCLK = 100.000 Mhz, PCLK = 50.000 Mhz
Starting kswapd
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
ttyS%d0 at I/O 0x50000000 (irq = 52) is a S3C2410
ttyS%d1 at I/O 0x50004000 (irq = 55) is a S3C2410
ttyS%d2 at I/O 0x50008000 (irq = 5 is a S3C2410
Console: switching to colour frame buffer device 30x40
Installed S3C2410 frame buffer
pty: 256 Unix98 ptys configured
s3c2410-ts initialized
S3C2410 Real Time Clock Driver v0.1
block: 128 slots per queue, batch=32
eth0: cs8920 rev B(5 Volts) found at 0xd0000300
cs8900a.c: wrong device driver!
cs89x0: no cs8900 or cs8920 detected.Be sure to disable PnP with SETUP
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)
bon0: 00000000-00030000 (00030000) 00000000
bon1: 00030000-00100000 (000d0000) 00000000
bon2: 00100000-03ff8000 (03ef8000) 00000000
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
VFS: Mounted root (cramfs filesystem).
Mounted devfs on /dev
Freeing init memory: 60K
mount /etc as ramfs
re-create the /etc/mtab entries
init started: BusyBox v1.00 (2005.06.09-02:02+0000) multi-call binary
Starting pid 18, console /dev/console: '/etc/init.d/rcS'
hub.c: USB new device connect on bus1/2, assigned device number 2
usb.c: USB device not accepting new address=2 (error=-110)
Embest Embedded Linux Development Paltform.
Default board ip: 192.192.192.190
SIOCSIFADDR: No such device
To change the ip addr: ifconfig eth0 new_board_ip
hub.c: USB new device connect on bus1/2, assigned device number 3
usb.c: USB device not accepting new address=3 (error=-110)
Start the web server: http://(board_ip)/index.htm
To connect the NFS server, please type like:
mkdir /etc/var/nfs
mount -t nfs nfs_server_ip:/home/app /etc/var/nfs -o nolock
To use the USB disc(insert first), please type like:
mount /dev/sda /mnt/udisk _OR_ mount /dev/sda1 /mnt/udisk
Please press Enter to activate this console.
[ 本帖最后由 xiaonawu 于 2009-4-14 10:58 编辑 ] |
|
免费注册
发表于 2009-04-14 10:57
发表于 2009-04-14 11:34