ubuntu 网卡配置

ygl23

网卡IP地址配置
/etc/network/interfaces
编辑 文件    sudo vi /etc/network/interfaces
重起 网卡    sudo  /etc/init.d/networking  restart

# This file describes the network interfaces available on your system# and how to activate them. For more information, see interfaces(5). # The loopback network interfaceauto loiface lo inet loopbackaddress 127.0.0.1netmask 255.0.0.0


auto eth0iface eth0 inet dhcp



iface eth1 inet static        address 192.168.0.2        netmask 255.255.255.0        gateway 192.168.0.1
In this case, you will need to specify your DNS servers manually in /etc/resolv.conf, which should look something like this:
search mydomain.examplenameserver 192.168.0.1nameserver 4.2.2.2

DNS servers used on the network (implemented in the /etc/resolv.conf


本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/1676/showart_1899809.html

cjp19882009

   你就不能把配置文件中打上换行符啊？？？  
我安照你的信息配置成了；
iface eth1
inet static   
address 192.168.0.2        
netmask 255.255.255.0        
gateway 192.168.0.1

结果，我的ubuntu系统就崩溃了。真的对ubuntu系统无语了，就一个网卡配置文件写错了，结果系统界面崩溃，系统启动一直启动网卡配置的：boot system without full network configuration....