是否能简单介绍一下g-bios各个特性的开发计划，例如对USB host/device 的支持？

zhongtao2000

在u-boot中已经支持USB host访问storage设备，在redboot/ecos中只支持USB device, 是否能简单介绍
一下g-bios各个特性的开发计划, 谢谢！


============================================================

Overview
The g-bios project aims at designing and developing a general architecture of bootloader/BIOS for Android and generic embedded Linux.

Features
Auto-decting the type image file and auto-burning intelligently.
Various file system support, including YAFFS1, YAFFS2, JFFS2, CRAMFS, NFS, etc.
Tab completion and history saving support.
Flash parition support.
boot parameters (Linux command line) auto setting, which greatly reduces the booting complexity and error probability!
Seperated into two parts, top half and bottom half on which the NB (Never Burn Down) tech is based.
Good design of subsystems, including interrupt, flash, network, etc.
Video BIOS Integerated.
Kermit support
GUI-based configuration.
USB host/device support