关于openldap2.3编译安装模块的问题

chuanqimaster

在SLAPD.CONF配置文件里有下面的注释掉的模块，我想做日志复制。需要用到其中的模块。我怎么编译安装都弄不出来下面的模块，我硬是郁闷的很。我的是openldap2.3我简单列出我的编译的步骤。大家帮我看下吧。
# Load dynamic backend modules:
# modulepath    /usr/local/libexec/openldap
# moduleload    back_bdb.la
# moduleload    back_ldap.la
# moduleload    back_ldbm.la
# moduleload    back_passwd.la
# moduleload    back_shell.la
[root@ldap2 openldap-2.3.43]# ./configure \
--enable-dynamic \
--enable-modules \
--enable-backends \
--enable-bdb          \
--enable-dnssrv \
--enable-hdb \
--enable-ldap \
--enable-ldbm \
--enable-shell \
--enable-wrappers \
--enable-syncprov \
--disable-sql
[root@ldap2 openldap-2.3.43]#make depend
[root@ldap2 openldap-2.3.43]#make
[root@ldap2 openldap-2.3.43]#make test   步骤正常
[root@ldap2 openldap-2.3.43]#make install
[root@ldap2 openldap-2.3.43]# find / -name "*syncprov*"  找不到
[root@ldap2 openldap-2.3.43]# find / -name "*back_bdb*" 找不到
我的模块死活 不出来。。我去看了
modulepath    /usr/local/libexec/openldap
这个目录根本没有。是为什么呢？是不是编译安装的时候什么选项没用上的原因？

chuanqimaster

手册上有这句话：
if you have compiled openldap with support for dso modules, make sure there two lines like:

modulepath    /usr/local/openldap/libexec/openldap
moduleload    back_hdb.la

where the directory /usr/local/openldap/libexec/openldap is the directory where the file back_hdb.la can be found.

让我看的更郁闷了。难道我哪个选项没加上？没编译？？

chuanqimaster

[root@ldap2 openldap-2.3.43]# ./configure --help
`configure' configures this package to adapt to many kinds of systems.

Usage: ./configure [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print `checking...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for `--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or `..']

Installation directories:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [/usr/local]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [PREFIX]

By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc.  You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:
  --bindir=DIR           user executables [EPREFIX/bin]
  --sbindir=DIR          system admin executables [EPREFIX/sbin]
  --libexecdir=DIR       program executables [EPREFIX/libexec]
  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
  --libdir=DIR           object code libraries [EPREFIX/lib]
  --includedir=DIR       C header files [PREFIX/include]
  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
  --infodir=DIR          info documentation [PREFIX/info]
  --mandir=DIR           man documentation [PREFIX/man]

Program names:
  --program-prefix=PREFIX            prepend PREFIX to installed program names
  --program-suffix=SUFFIX            append SUFFIX to installed program names
  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names

System types:
  --build=BUILD     configure for building on BUILD [guessed]
  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
  --target=TARGET   configure for building compilers for TARGET [HOST]

Optional Features:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --enable-debug          enable debugging [yes]
  --enable-dynamic        enable linking built binaries with dynamic libs [no]
  --enable-syslog         enable syslog support [auto]
  --enable-proctitle      enable proctitle support [yes]
  --enable-ipv6           enable IPv6 support [auto]
  --enable-local          enable AF_LOCAL (AF_UNIX) socket support [auto]

SLAPD (Standalone LDAP Daemon) Options:
  --enable-slapd          enable building slapd [yes]
    --enable-aci          enable per-object ACIs (experimental) [no]
    --enable-cleartext    enable cleartext passwords [yes]
    --enable-crypt        enable crypt(3) passwords [no]
    --enable-lmpasswd     enable LAN Manager passwords [no]
    --enable-spasswd      enable (Cyrus) SASL password verification [no]
    --enable-modules      enable dynamic module support [no]
    --enable-rewrite      enable DN rewriting in back-ldap and rwm overlay [auto]
    --enable-rlookups     enable reverse lookups of client hostnames [no]
    --enable-slapi        enable SLAPI support (experimental) [no]
    --enable-slp          enable SLPv2 support [no]
    --enable-wrappers     enable tcp wrapper support [no]

SLAPD Backend Options:
    --enable-backends     enable all available backends no|yes|mod
    --enable-bdb          enable Berkeley DB backend no|yes|mod [yes]
    --enable-dnssrv       enable dnssrv backend no|yes|mod [no]
    --enable-hdb          enable Hierarchical DB backend no|yes|mod [yes]
    --enable-ldap         enable ldap backend no|yes|mod [no]
    --enable-ldbm         enable ldbm backend no|yes|mod [no]
      --enable-ldbm-api   use LDBM API auto|berkeley|bcompat|mdbm|gdbm [auto]
      --enable-ldbm-type  use LDBM type auto|btree|hash [auto]
    --enable-meta         enable metadirectory backend no|yes|mod [no]
    --enable-monitor      enable monitor backend no|yes|mod [yes]
    --enable-null         enable null backend no|yes|mod [no]
    --enable-passwd       enable passwd backend no|yes|mod [no]
    --enable-perl         enable perl backend no|yes|mod [no]
    --enable-relay        enable relay backend no|yes|mod [yes]
    --enable-shell        enable shell backend no|yes|mod [no]
    --enable-sql          enable sql backend no|yes|mod [no]

SLAPD Overlay Options:
    --enable-overlays     enable all available overlays no|yes|mod
    --enable-accesslog    In-Directory Access Logging overlay no|yes|mod [no]
    --enable-auditlog     Audit Logging overlay no|yes|mod [no]
    --enable-denyop       Deny Operation overlay no|yes|mod [no]
    --enable-dyngroup     Dynamic Group overlay no|yes|mod [no]
    --enable-dynlist      Dynamic List overlay no|yes|mod [no]
    --enable-lastmod      Last Modification overlay no|yes|mod [no]
    --enable-ppolicy      Password Policy overlay no|yes|mod [no]
    --enable-proxycache   Proxy Cache overlay no|yes|mod [no]
    --enable-refint       Referential Integrity overlay no|yes|mod [no]
    --enable-retcode      Return Code testing overlay no|yes|mod [no]
    --enable-rwm          Rewrite/Remap overlay no|yes|mod [no]
    --enable-syncprov     Syncrepl Provider overlay no|yes|mod [yes]
    --enable-translucent  Translucent Proxy overlay no|yes|mod [no]
    --enable-unique       Attribute Uniqueness overlay no|yes|mod [no]
    --enable-valsort      Value Sorting overlay no|yes|mod [no]

SLURPD (Replication Daemon) Options:
  --enable-slurpd         enable building slurpd [auto]

Library Generation & Linking Options
  --enable-static[=PKGS]
                          build static libraries [default=yes]
  --enable-shared[=PKGS]
                          build shared libraries [default=yes]
  --enable-fast-install[=PKGS]
                          optimize for fast installation [default=yes]
  --disable-dependency-tracking  speeds up one-time build
  --enable-dependency-tracking   do not reject slow dependency extractors
  --disable-libtool-lock  avoid locking (might break parallel builds)

Optional Packages:
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-subdir=DIR       change default subdirectory used for installs
  --with-cyrus-sasl       with Cyrus SASL support [auto]
  --with-fetch            with fetch(3) URL support [auto]
  --with-threads          with threads [auto]
  --with-tls              with TLS/SSL support [auto]
  --with-yielding-select  with implicitly yielding select [auto]
  --with-mp               with multiple precision statistics auto|longlong|long|bignum|gmp [auto]
  --with-odbc             with specific ODBC support iodbc|unixodbc|auto [auto]

  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
  --with-pic              try to use only PIC/non-PIC objects [default=use
                          both]
  --with-tags[=TAGS]
                          include additional configurations [automatic]

See INSTALL file for further details.

Some influential environment variables:
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
              headers in a nonstandard directory <include dir>
  CPP         C preprocessor

Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.

kns1024wh

一个是在操作之前首先查看手册，另一个较好的习惯就是看看./configure --help的参数

chuanqimaster

原帖由 kns1024wh 于 2008-12-10 09:01 发表
一个是在操作之前首先查看手册，另一个较好的习惯就是看看./configure --help的参数

哥们你没编译过。我的意思就是编译安装过的兄弟都去看看自己有模块没。因为有些参数默认是YES了的。我编译出来就没有。不知道是为什么。也没有找到权威的回答我是哪里做错了。哥们你没做过吧？