免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
123下一页
最近访问板块 发新帖
查看: 6863 | 回复: 29
打印 上一主题 下一主题

巨怪!suse9企业版安装过程中出现了四个小窗口!!!见图! [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2008-11-22 21:23 |只看该作者 |倒序浏览
suse9安装过程中出现了四个小窗口,真的是有点儿抓狂啊,GOOGLE,BAIDU里怎么没有这样的情况出现啊?一般就是一个图啊.试了好几种方法都不通,所以只好硬着头皮眯着眼睛装了下去,很不爽啊!ddddfff

论坛徽章:
0
2 [报告]
发表于 2008-11-22 21:24 |只看该作者

回复 #1 smalltom29 的帖子

大家支持着一下啊,自己先顶上去!

论坛徽章:
0
3 [报告]
发表于 2008-11-22 21:29 |只看该作者
是不是你安装过程中,修改了什么东西

论坛徽章:
0
4 [报告]
发表于 2008-11-22 21:35 |只看该作者

回复 #1 smalltom29 的帖子

尽量发上来你安装过程的截图,没有截图怎么判断呢?

论坛徽章:
0
5 [报告]
发表于 2008-11-22 21:42 |只看该作者
我在分区,还有下面的安装过程中都一直是这样的四分格啊,所以没有上传更多的图,只是FINISH后,就可以正常进入桌面了,真的是怪:em12:

论坛徽章:
0
6 [报告]
发表于 2008-11-22 21:44 |只看该作者
还有,请问大家谁知道哪有SUSE9企业版的安装源啊,我下SUSE10时,CD3中都被AVAST查出了带毒了???

论坛徽章:
1
操作系统版块每日发帖之星
日期:2015-07-11 22:20:00
7 [报告]
发表于 2008-11-22 22:15 |只看该作者
我好像在哪也遇到过。

论坛徽章:
0
8 [报告]
发表于 2008-11-22 22:49 |只看该作者

回复 #3 pl_piaoling 的帖子

没有,就是的选项中的几种方法,像什么ACPT,SAFE,MOMERY之类的,都试过,到了下一步就出现这个了

论坛徽章:
0
9 [报告]
发表于 2008-11-23 10:57 |只看该作者
以前也碰到过,我对这个问题的摘记。
CU已经有人解答过了,(我没验证过,LZ试过来说下。 thx)

Q:
suse9.0在vmware5.0上安装刚开始就出现4分频,安装一直无法进行下去,跪求,怎么解决?安装刚开始选择了“installation”后,就出现4分频,是什么问题呀?请教了
A:
1.vmware 安装的时候需要加参数 x11i=fbdev 安装,10以后就不用了。
2.不要用图形模式安装,按F2选 text.
3.这个问题我也遇到过,后来发现很简单,只要把你的windows颜色设置为中16位,不要设置32位,就不会再出现4分屏了。
http://linux.chinaunix.net/bbs/thread-916977-1-1.html

Novel solution:

TIP: Can't Perform a GUI based Install
Environment VMware Workstation Version: 4.5.2 build-8848Host OS: Windows XPGuest OS: OES/SLES9sp2
Problem After selecting "Installation" from the initial Blue screen/menu the screen turns into a purple screen with either 2 or 4 duplicated consoles each with small green text that is hard to read. There is also an error message displayed that will not allow a GUI install.
Solution Here are some options:
Option 1 - Text-based Install Before selecting "Installation" from the blue boot menu, change to the mode to Text using F2. The install will start in Text mode. It is just like the GUI/YaST based install. Later you can install VMware Tools to get the GUI running locally in VMware.
Option 2 - GUI Install via VNC You can use "Boot Options" that will start VNC so you can run the GUI/YaST install portion of the install from either a VNC viewer or a browser. Later you can install VMware Tools to get the GUI running locally in VMware. To install via VNC:
Before selecting "Installation" from the Blue boot menu, add the following text to the "Boot Options": vnc=1 vncpassword=novell This will 1) enable vnc and 2) set the vncpassword to novell When the install is ready it will display the info you need to connect using VNC. e.g. Browser URL: "http://http://ip_address":5801
Misc Install Tips - If you select a "default" SLES 9 install, you should also install the gcc, gcc-devel, and kernel-source packages. These are needed for VMware Tools installation. - I recommend that you enable VNC remote administration so you can get to the GUI remotely. This may come in handy if you have problems with the X-server running locally in your VM.

[ 本帖最后由 可可火山 于 2008-11-23 10:59 编辑 ]

论坛徽章:
0
10 [报告]
发表于 2008-11-23 13:17 |只看该作者
这个很搞笑啊!第一次见到!
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP