免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 1199 | 回复: 0
打印 上一主题 下一主题

Installing Arch-Linux on F31G [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2008-09-15 11:09 |只看该作者 |倒序浏览

                                                                               
Installing Arch-Linux 2008.03 on F31G
Last updated: 2008-9-15
General Hardware Specifications of F31G:
 Hardware Components Status under Linux Notes Pentium IV D Processor T2390, 1.86 GHz Works No special procedure required during installation. 13.3 WXGA TFT Display Works No select Generic LCD Display in Installer Intel X3100 IGP Works Using Intel Linux driver 1GB, DDR2 Works No special procedure required during installation. 250 GB SATA Hard Drive Works No special procedure required during installation. Integrated Network Card BCM5906M Works Use tg3 driver module Wireless BCM4312 Works Need Boradcom official driver DVD RW No test No special procedure required during installation. Touchpad Works  No special procedure required during installation. Motolora 56K Modem No test
  No special procedure required during installation. Intel 82801H (ICH8 Family) HD Audio Controller,Realtek HD Audio Sound Card       Works No special procedure required during installation. Bluetooth No test
 TODO
bash-3.2# lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
05:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
05:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
05:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
05:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
05:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
      
      
   
  
This laptop is operating under a Kernel version 2.6.25-ARCH.
bash-3.2# uname -a
Linux Lite-Linux 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686 Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz GenuineIntel GNU/Linux
I choose ArchLinux, because I used slackware and gentoo in my Desktop machine, and I think gentoo need too much time to complie and slackware is hard to upgrade system. So this time I use ArchLinux in my laptop. 
All the thing goes well, except the wifi need some work.
http://www.broadcom.com/support/802.11/linux_sta.php
Get the BCM4312 offical driver and install it.(What a pity:it's no a opensource driver completely:-() But it just work, and I had try ndiswapper, it doesn't do that.
Let's enjoy Linux!
 
               
               
               
               
               
               
               
               
               
               
               
               

本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u/6547/showart_1193432.html
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP