- 论坛徽章:
- 0
|
一台IBM服务器需要挂接存储.但安装HBA卡驱动后就不见存储的设备.更别提去mount了.
收集了一些信息.才疏学浅没找到什么问题.请大家帮帮忙,先谢谢了..
存储的映射方面应该是没什么问题.其他平台的映射都OK.就这台服务器没见到映射的存储.
Linux版本:
Linux version 2.6.9-5.ELsmp (bhcompile@decompose.build.redhat.com) (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 SMP Wed Jan 5 19:30:39 EST 2005
---------------------------------------------------------------------------------------
/proc/scsi/scsi文件内容
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ADAPTEC Model: RAID RAID5 Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: USB 2.0 Model: (HS) Flash Disk Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
---------------------------------------------------------------------------------------
/proc/scsi/qla/1文件内容
QLogic PCI to Fibre Channel Host Adapter for QLA2310:
Firmware version 3.03.15 IPX, Driver version 8.01.00
ISP: ISP2300, Serial# C32985
Request Queue = 0x37440000, Response Queue = 0x37420000
Request Queue count = 2048, Response Queue count = 512
Total number of active commands = 0
Total number of interrupts = 149
Device queue depth = 0x10
Number of free request entries = 2044
Number of mailbox timeouts = 0
Number of ISP aborts = 0
Number of loop resyncs = 0
Number of retries for empty slots = 0
Number of reqs in pending_q= 0, retry_q= 0, done_q= 0, scsi_retry_q= 0
Host adapter:loop state = <READY>, flags = 0xa13
Dpc flags = 0x4080000
MBX flags = 0x0
Link down Timeout = 000
Port down retry = 008
Login retry count = 008
Commands retried with dropped frame(s) = 0
Product ID = 4953 5020 2020 0001
SCSI Device Information:
scsi-qla0-adapter-node=200000e08b03198e;
scsi-qla0-adapter-port=210000e08b03198e;
scsi-qla0-target-0=210000d02304d92e;
scsi-qla0-target-1=210000d02314d92e;
FC Port Information:
scsi-qla0-port-0=200000062b101a3c:100000062b101a3c:0000ef:0;
scsi-qla0-port-1=200000e08b03148e:210000e08b03148e:0000e8:1;
scsi-qla0-port-2=200000062b101ab4:100000062b101ab4:0000e4:2;
scsi-qla0-port-3=200000e08b031a8e:210000e08b031a8e:0000e2:3;
scsi-qla0-port-4=200000e08b9bafd5:210000e08b9bafd5:000002:7c;
scsi-qla0-port-5=200000e08b9b7dd1:210000e08b9b7dd1:000001:7d;
scsi-qla0-port-6=200000d02304d92e:210000d02304d92e:000025:70;
scsi-qla0-port-7=200000d02314d92e:210000d02314d92e:000023:71;
SCSI LUN Information:
(Id:Lun) * - indicates lun is not registered with the OS.
( 0: 0): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:70 00
( 1: 0): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:71 00
------------------------------------------------------------------------------------------------
dmesg信息
Linux version 2.6.9-5.ELsmp (bhcompile@decompose.build.redhat.com) (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 SMP Wed Jan 5 19:30:39 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ff8dcc0 (usable)
BIOS-e820: 000000007ff8dcc0 - 000000007ff98880 (ACPI data)
BIOS-e820: 000000007ff98880 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 0009bd40
On node 0 totalpages: 524173
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 294797 pages, LIFO batch:16
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 IBM ) @ 0x000fdcf0
ACPI: RSDT (v001 IBM EXA01ZEU 0x00001000 IBM 0x45444f43) @ 0x7ff98800
ACPI: FADT (v001 IBM EXA01ZEU 0x00001000 IBM 0x45444f43) @ 0x7ff98780
ACPI: MADT (v001 IBM EXA01ZEU 0x00001000 IBM 0x45444f43) @ 0x7ff98700
ACPI: SRAT (v001 IBM EXA01ZEU 0x00001000 IBM 0x45444f43) @ 0x7ff98680
ACPI: DSDT (v001 IBM SER01ZEU 0x00001000 INTL 0x20030122) @ 0x00000000
ACPI: PM-Timer IO Port: 0x9c
ACPI: Local APIC address 0xfee00000
Switched to APIC driver `summit'.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 15, version 17, address 0xfec00000, GSI 0-35
ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[36])
IOAPIC[1]: apic_id 14, version 17, address 0xfec01000, GSI 36-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 8 low edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 low edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ8 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
Enabling APIC mode: Summit. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: ro root=LABEL=/1 max_scsi_luns=128
Initializing CPU#0
CPU 0 irqstacks, hard=c03d8000 soft=c03b8000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Summit chipset: Starting Cyclone Counter.
Summit chipset: Could not find valid CBAR value.
Detected 3672.811 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2072928k/2096692k available (1819k kernel code, 22752k reserved, 740k data, 172k init, 1179188k highmem)
Calibrating delay loop... 7208.96 BogoMIPS (lpj=3604480)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 01
per-CPU timeslice cutoff: 2925.76 usecs.
task migration cache decay timeout: 3 msecs.
Leaving ESR disabled.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c03d9000 soft=c03b9000
Initializing CPU#1
Leaving ESR disabled.
Calibrating delay loop... 7323.64 BogoMIPS (lpj=3661824)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 01
Total of 2 processors activated (14532.60 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 883k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xfd41f, last bus=13
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [VP00] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
ACPI: PCI Interrupt Routing Table [\_SB_.VP00._PRT]
ACPI: PCI Root Bridge [VP01] (00:01)
PCI: Probing PCI hardware (bus 01)
ACPI: PCI Interrupt Routing Table [\_SB_.VP01._PRT]
ACPI: PCI Root Bridge [VP02] (00:02)
PCI: Probing PCI hardware (bus 02)
ACPI: PCI Interrupt Routing Table [\_SB_.VP02._PRT]
ACPI: PCI Root Bridge [VP03] (00:04)
PCI: Probing PCI hardware (bus 04)
ACPI: PCI Interrupt Routing Table [\_SB_.VP03._PRT]
ACPI: PCI Root Bridge [VP04] (00:06)
PCI: Probing PCI hardware (bus 06)
ACPI: PCI Interrupt Routing Table [\_SB_.VP04._PRT]
ACPI: PCI Root Bridge [VP05] (00:0
PCI: Probing PCI hardware (bus 0
ACPI: PCI Interrupt Routing Table [\_SB_.VP05._PRT]
ACPI: PCI Root Bridge [VP06] (00:0a)
PCI: Probing PCI hardware (bus 0a)
ACPI: PCI Interrupt Routing Table [\_SB_.VP06._PRT]
ACPI: PCI Root Bridge [VP07] (00:0c)
PCI: Probing PCI hardware (bus 0c)
ACPI: PCI Interrupt Routing Table [\_SB_.VP07._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 20 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 20 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 24 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:01:01.1[B] -> GSI 28 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 25 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:0a:01.0[A] -> GSI 54 (level, low) -> IRQ 209
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1215361168.625:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key E07BC3E85BE30CFD
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
ACPI: Processor [CP00] (supports C1)
ACPI: Processor [CP01] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected a Serverworks chipset but could not find the secondary device.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB6: IDE controller at PCI slot 0000:00:0f.1
SvrWks CSB6: chipset revision 160
SvrWks CSB6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda MA, hdbMA
SvrWks CSB6: simplex device: DMA disabled
ide1: SvrWks CSB6 Bus-Master DMA disabled (BIOS)
Probing IDE interface ide0...
hda: HL-DT-STDVD-ROM GDR8082N, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 43690)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S5)
ACPI wakeup devices:
Freeing unused kernel memory: 172k freed
SCSI subsystem initialized
aacraid: falsely claims to have parameter commit
Red Hat/Adaptec aacraid driver (1.1.2-lk2 Jan 5 2005)
ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 25 (level, low) -> IRQ 201
AAC0: kernel 5.0.4 build 7777
AAC0: monitor 5.0.4 build 7777
AAC0: bios 5.0.0 build 7777
AAC0: serial 14dc4ffafaf001
AAC0: 64bit support enabled.
AAC0: 64 Bit DAC enabled
scsi0 : aacraid
Vendor: ADAPTEC Model: RAID RAID5 Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 286306304 512-byte hdwr sectors (146589 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
QLogic Fibre Channel HBA Driver
ACPI: PCI interrupt 0000:0a:01.0[A] -> GSI 54 (level, low) -> IRQ 209
qla2300 0000:0a:01.0: Found an ISP2300, irq 209, iobase 0xf8846000
qla2300 0000:0a:01.0: Configuring PCI space...
qla2300 0000:0a:01.0: Configure NVRAM parameters...
qla2300 0000:0a:01.0: Verifying loaded RISC code...
qla2300 0000:0a:01.0: LIP reset occured (f7f7).
qla2300 0000:0a:01.0: Waiting for LIP to complete...
qla2300 0000:0a:01.0: LIP occured (f7f7).
qla2300 0000:0a:01.0: LOOP UP detected (2 Gbps).
qla2300 0000:0a:01.0: LIP reset occured (f7f7).
qla2300 0000:0a:01.0: LIP occured (f7f7).
qla2300 0000:0a:01.0: Topology - (Loop), Host Loop address 0x4
scsi1 : qla2xxx
qla2300 0000:0a:01.0:
QLogic Fibre Channel HBA Driver: 8.01.00
QLogic QLA2310 -
ISP2300: PCI-X (66 MHz) @ 0000:0a:01.0 hdma+, host#=1, fw=3.03.15 IPX
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 316 types, 20 bools
security: 53 classes, 9815 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
inserting floppy driver for 2.6.9-5.ELsmp
floppy0: no floppy controllers found
tg3.c:v3.10 (September 14, 2004)
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 24 (level, low) -> IRQ 185
divert: allocating divert_blk for eth0
eth0: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:14:5e:1b:1a:4a
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0]
ACPI: PCI interrupt 0000:01:01.1[B] -> GSI 28 (level, low) -> IRQ 193
divert: allocating divert_blk for eth1
eth1: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:14:5e:1b:1a:4b
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 20 (level, low) -> IRQ 177
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: irq 177, pci mem f88a8000
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 177
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: irq 177, pci mem f88aa000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 20 (level, low) -> IRQ 177
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: irq 177, pci mem f88ac000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.0: wakeup
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 2-1: new full speed USB device using address 2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 3 ports detected
usb 2-1.1: new full speed USB device using address 3
input: USB HID v1.00 Keyboard [ALCOR Movado USB Keyboard] on usb-0000:00:03.0-1.1
input,hiddev96: USB HID v1.00 Device [ALCOR Movado USB Keyboard] on usb-0000:00:03.0-1.1
ACPI: Power Button (FF) [PWRF]
EXT3 FS on sda1, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
cdrom: open failed.
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda6, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda2, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext3), uses xattr
Adding 2096440k swap on /dev/sda5. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
--------------------------------------------------------------------------------------------------------------------------------------- |
|
免费注册
发表于 2008-07-23 10:34
