- 论坛徽章:
- 0
|
~~~~~~~~~~~~~~./configure运行后的错误提示~~~~~~~~~~~~~~~
checking for pkg-config... (cached) pkg-config
configure: WARNING:
----------------------------------------------------------------------------
* I found a copy of pkgconfig, but there is no pangocairo.pc file around.
You may want to set the PKG_CONFIG_PATH variable to point to its
location.
----------------------------------------------------------------------------
configure: WARNING:
----------------------------------------------------------------------------
* I could not find a working copy of pangocairo. Check config.log for hints on why
this is the case. Maybe you need to set LDFLAGS and CPPFLAGS appropriately
so that compiler and the linker can find libpango-1.0 and its header files. If
you have not installed pangocairo, you can get it either from its original home on
http://ftp.gnome.org/pub/GNOME/sources/pango/1.17
You can find also find an archive copy on
http://oss.oetiker.ch/rrdtool/pub/libs
The last tested version of pangocairo is 1.17.
LIBS=-lcairo -lcairo -lcairo -lm -lcairo -lpng12
LDFLAGS=
CPPFLAGS= -I/usr/include/cairo -I/usr/include/libpng12 -I/usr/include/freetype2
----------------------------------------------------------------------------
checking for xmlParseFile in -lxml2... yes
checking libxml/parser.h usability... yes
checking libxml/parser.h presence... yes
checking for libxml/parser.h... yes
configure: error: Please fix the library issues listed above and try again.
~~~~~~~~~~~~~~~help configure~~~~~~~~~~~~~~~~~~~~~
[root@srv1 rrdtool-1.3.0]# ./configure --help
`configure' configures rrdtool 1.3.0 to adapt to many kinds of systems.
Usage: ./configure [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print `checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for `--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or `..']
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[/usr/local/rrdtool-1.3.0]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, `make install' will install all the files in
`/usr/local/rrdtool-1.3.0/bin', `/usr/local/rrdtool-1.3.0/lib' etc. You can specify
an installation prefix other than `/usr/local/rrdtool-1.3.0' using `--prefix',
for instance `--prefix=$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root [DATAROOTDIR/doc/rrdtool]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR]
Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
--target=TARGET configure for building compilers for TARGET [HOST]
Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
--disable-rrdcgi disable building of rrdcgi
--disable-mmap disable mmap in rrd_update, use seek+write instead
--disable-pthread disable multithread support
--enable-static-programs Build static programs
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
--enable-shared[=PKGS] build shared libraries [default=yes]
--enable-static[=PKGS] build static libraries [default=yes]
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
--disable-libintl i18n support (libintl)
--disable-perl do not build the perl modules
--enable-perl-site-install by default the rrdtool perl modules are installed
together with rrdtool in $prefix/lib/perl. You have to
put a 'use lib qw($prefix/lib/perl)' into your scripts
when you want to use them. When you set this option
the perl modules will get installed wherever
your perl setup thinks it is best.
--disable-ruby do not build the ruby modules
--enable-ruby-site-install by default the rrdtool ruby modules are installed
together with rrdtool in $prefix/lib/ruby. You have to
add $prefix/lib/ruby/$ruby_version/$sitearch to you $: variable
for ruby to find the RRD.so file.
--disable-tcl do not build the tcl modules
--enable-tcl-site install the tcl extension in the tcl tree
--disable-python do not build the python modules
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-rrd-default-font=OPTIONS set the full path to your default font.
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-tags[=TAGS] include additional configurations [automatic]
--with-perl-options=OPTIONS options to pass on command-line when
generating Makefile from Makefile.PL. If you set this
option, interesting things may happen unless you know
what you are doing!
--with-ruby-options=OPTIONS options to pass on command-line when
generating Makefile from extconf.rb. If you set this
option, interesting things may happen unless you know
what you are doing!
--with-tcllib=DIR location of the tclConfig.sh
Some influential environment variables:
RRDGRAPH_YLEGEND_ANGLE
Vertical label angle: -90.0 (default) or 90.0
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
LIBS libraries to pass to the linker, e.g. -l<library>
CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CXXCPP C++ preprocessor
F77 Fortran 77 compiler command
FFLAGS Fortran 77 compiler flags
PERLCC [] C compiler for Perl modules
PERLCCFLAGS [] CC flags for Perl modules
PERLLD [same], [as], [PERLCC] Linker for Perl modules
PERLLDFLAGS [] LD flags for Perl modules
RRDDOCDIR [DATADIR/doc/PACKAGE-VERSION] Documentation directory
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
我安装了pango 我知道默认装到 /var/local/lib里面去了 可不知道如何调整环境来进行正确的编译 |
|
免费注册
发表于 2008-07-11 11:51
PATH
发表于 2009-04-07 14:46
