- 论坛徽章:
- 0
|
我的一块A5x00中的硬盘显示为offline是怎么回事,我觉得硬盘是没有问题的。具体的显示如下:
# luxadm display b
SENA
DISK STATUS
SLOT FRONT DISKS (Node WWN) REAR DISKS (Node WWN)
0 Not Installed On (O.K.) 20000020378e57d8
1 Not Installed Not Installed
2 Not Installed Not Installed
3 On (Bypassed:AB) On (O.K.) 20000020378e550a
4 Not Installed Not Installed
5 Not Installed Not Installed
6 On (O.K.) 20000020378e46b2 On (O.K.) 20000020378e4a8a
SUBSYSTEM STATUS
FW Revision:1.09 Box ID:0 Node WWN:50800200000a0838 Enclosure Name:b
Power Supplies (0,2 in front, 1 in rear)
0 O.K.(rev.-02) 1 O.K.(rev.-02) 2 O.K.(rev.-02)
Fans (0 in front, 1 in rear)
0 O.K.(rev.-04) 1 O.K.(rev.-00)
ESI Interface board(IB) (A top, B bottom)
A: O.K.(rev.-04)
GBIC module (1 on left, 0 on right in IB)
0 O.K.(mod.-05)
1 Not Installed
B: O.K.(rev.-04)
GBIC module (1 on left, 0 on right in IB)
0 Failed(mod.-05): Not receiving a signal
1 Not Installed
Disk backplane (0 in front, 1 in rear)
Front Backplane: O.K.(rev.-04)
Temperature sensors (on front backplane)
0:33篊 1:33篊 2:33篊 3:33篊 4:33篊 5:33篊
6:34篊 (All temperatures are NORMAL.)
Rear Backplane: O.K.(rev.-04)
Temperature sensors (on rear backplane)
0:34篊 1:34篊 2:33篊 3:33篊 4:33篊 5:33篊
6:34篊 (All temperatures are NORMAL.)
Interconnect assembly
O.K.(rev.-02)
Loop configuration
Loop A is configured as a single loop.
Loop B is configured as a single loop.
Language USA English |
|