免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
› 论坛 › 操作系统 › Linux新手园地 › linux4安装sata硬盘的问题
12下一页
最近访问板块 发新帖
查看: 5708 | 回复: 14
打印 上一主题 下一主题

linux4安装sata硬盘的问题 [复制链接]

fhtt0606

论坛徽章:
0
跳转到指定楼层
1楼 [收藏(0)] [报告]
发表于 2007-07-24 17:22 |只看该作者 |倒序浏览
停机装上sata硬盘，fdisk －l只能看到原来的一块盘，请大家帮我看看要怎么做？
linux版本：
Red Hat Enterprise Linux AS release 4
dmesg信息如下：
  1. Linux version 2.6.9-42.ELsmp (bhcompile@hs20-bc1-1.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-2)) #1 SMP Wed Jul 12 23:27:17 EDT 2006
  2. BIOS-provided physical RAM map:
  3. BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
  4. BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
  5. BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
  6. BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  7. BIOS-e820: 0000000000100000 - 00000000bff60000 (usable)
  8. BIOS-e820: 00000000bff60000 - 00000000bff6a000 (ACPI data)
  9. BIOS-e820: 00000000bff6a000 - 00000000bff80000 (ACPI NVS)
  10. BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
  11. BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  12. BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
  13. BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  14. BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
  15. BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
  16. 4224MB HIGHMEM available.
  17. 896MB LOWMEM available.
  18. found SMP MP-table at 000f6760
  19. NX (Execute Disable) protection: active
  20. On node 0 totalpages: 1310720
  21.   DMA zone: 4096 pages, LIFO batch:1
  22.   Normal zone: 225280 pages, LIFO batch:16
  23.   HighMem zone: 1081344 pages, LIFO batch:16
  24. DMI present.
  25. Using APIC driver default
  26. ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6730
  27. ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0xbff63cb5
  28. ACPI: FADT (v001 INTEL           0x06040000 PTL  0x00000003) @ 0xbff69e64
  29. ACPI: MADT (v001 PTLTD           APIC   0x06040000  LTP 0x00000000) @ 0xbff69ed8
  30. ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0xbff69f4c
  31. ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0xbff69f88
  32. ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001) @ 0xbff69fb0
  33. ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050228) @ 0xbff63cf1
  34. ACPI: DSDT (v001  Intel BLAKFORD 0x06040000 MSFT 0x0100000d) @ 0x00000000
  35. ACPI: PM-Timer IO Port: 0x1008
  36. ACPI: Local APIC address 0xfee00000
  37. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  38. Processor #0 6:15 APIC version 20
  39. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  40. Processor #1 6:15 APIC version 20
  41. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  42. ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  43. Enabling APIC mode:  Flat.  Using 0 I/O APICs
  44. ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  45. IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  46. ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
  47. IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
  48. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
  49. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  50. ACPI: IRQ0 used by override.
  51. ACPI: IRQ2 used by override.
  52. ACPI: IRQ9 used by override.
  53. Using ACPI (MADT) for SMP configuration information
  54. Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
  55. Built 1 zonelists
  56. Kernel command line: ro root=LABEL=/ rhgb quiet
  57. mapped APIC to ffffd000 (fee00000)
  58. Initializing CPU#0
  59. CPU 0 irqstacks, hard=c03ee000 soft=c03ce000
  60. PID hash table entries: 4096 (order: 12, 65536 bytes)
  61. Detected 1596.383 MHz processor.
  62. Using pmtmr for high-res timesource
  63. Console: colour VGA+ 80x25
  64. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  65. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  66. Memory: 4145488k/5242880k available (1876k kernel code, 47140k reserved, 759k data, 184k init, 3276160k highmem)
  67. Calibrating delay using timer specific routine.. 3194.48 BogoMIPS (lpj=1597243)
  68. Security Scaffold v1.0.0 initialized
  69. SELinux:  Initializing.
  70. SELinux:  Starting in permissive mode
  71. There is already a security framework initialized, register_security failed.
  72. selinux_register_security:  Registering secondary module capability
  73. Capability LSM initialized as secondary
  74. Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
  75. CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
  76. CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
  77. monitor/mwait feature present.
  78. using mwait in idle threads.
  79. CPU: L1 I cache: 32K, L1 D cache: 32K
  80. CPU: L2 cache: 4096K
  81. CPU0: Physical Processor ID: 0
  82. CPU0: Processor Core ID: 0
  83. CPU0: Initial APIC ID: 0
  84. CPU: After all inits, caps:        bfebfbff 20100000 00000000 00000040
  85. Intel machine check architecture supported.
  86. Intel machine check reporting enabled on CPU#0.
  87. Enabling fast FPU save and restore... done.
  88. Enabling unmasked SIMD FPU exception support... done.
  89. Checking 'hlt' instruction... OK.
  90. CPU0: Intel(R) Xeon(R) CPU            5110  @ 1.60GHz stepping 06
  91. per-CPU timeslice cutoff: 4009.59 usecs.
  92. task migration cache decay timeout: 5 msecs.
  93. Booting processor 1/1 eip 3000
  94. CPU 1 irqstacks, hard=c03ef000 soft=c03cf000
  95. Initializing CPU#1
  96. Calibrating delay using timer specific routine.. 3191.42 BogoMIPS (lpj=1595712)
  97. CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
  98. CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
  99. monitor/mwait feature present.
  100. CPU: L1 I cache: 32K, L1 D cache: 32K
  101. CPU: L2 cache: 4096K
  102. CPU1: Physical Processor ID: 0
  103. CPU1: Processor Core ID: 1
  104. CPU1: Initial APIC ID: 1
  105. CPU: After all inits, caps:        bfebfbff 20100000 00000000 00000040
  106. Intel machine check architecture supported.
  107. Intel machine check reporting enabled on CPU#1.
  108. CPU1: Intel(R) Xeon(R) CPU            5110  @ 1.60GHz stepping 06
  109. Total of 2 processors activated (6385.91 BogoMIPS).
  110. ENABLING IO-APIC IRQs
  111. ..TIMER: vector=0x31 pin1=2 pin2=-1
  112. checking TSC synchronization across 2 CPUs: passed.
  113. Brought up 2 CPUs
  114. zapping low mappings.
  115. checking if image is initramfs... it is
  116. Freeing initrd memory: 478k freed
  117. NET: Registered protocol family 16
  118. PCI: PCI BIOS revision 2.10 entry at 0xfd707, last bus=18
  119. PCI: Using MMCONFIG
  120. mtrr: v2.0 (20020519)
  121. ACPI: Subsystem revision 20040816
  122. ACPI: Interpreter enabled
  123. ACPI: Using IOAPIC for interrupt routing
  124. ACPI: PCI Root Bridge [PCI0] (00:00)
  125. PCI: Probing PCI hardware (bus 00)
  126. PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
  127. PCI: Transparent bridge - 0000:00:1e.0
  128. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  129. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
  130. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0._PRT]
  131. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD0._PRT]
  132. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD1._PRT]
  133. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMF3._PRT]
  134. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
  135. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
  136. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
  137. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
  138. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
  139. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *6 7 10 11 14 15)
  140. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
  141. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
  142. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *9
  143. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
  144. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
  145. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
  146. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
  147. Linux Plug and Play Support v0.97 (c) Adam Belay
  148. usbcore: registered new driver usbfs
  149. usbcore: registered new driver hub
  150. PCI: Using ACPI for IRQ routing
  151. ACPI: PCI interrupt 0000:00:00.0[A] -> GSI 16 (level, low) -> IRQ 169
  152. ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 19 (level, low) -> IRQ 177
  153. ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 19 (level, low) -> IRQ 177
  154. ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
  155. ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 169
  156. ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
  157. ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 169
  158. ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
  159. ACPI: PCI interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 185
  160. ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 185
  161. ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
  162. ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 177
  163. ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
  164. ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 17 (level, low) -> IRQ 185
  165. ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
  166. ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 185
  167. ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 177
  168. ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 177
  169. ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 169
  170. ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 177
  171. ACPI: PCI interrupt 0000:10:00.0[A] -> GSI 16 (level, low) -> IRQ 169
  172. ACPI: PCI interrupt 0000:12:04.0[A] -> GSI 16 (level, low) -> IRQ 169
  173. Simple Boot Flag at 0x3c set to 0x1
  174. IBM machine detected. Enabling interrupts during APM calls.
  175. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
  176. apm: disabled - APM is not SMP safe.
  177. audit: initializing netlink socket (disabled)
  178. audit(1185228064.283:1): initialized
  179. highmem bounce pool size: 64 pages
  180. Total HugeTLB memory allocated, 0
  181. VFS: Disk quotas dquot_6.5.1
  182. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  183. SELinux:  Registering netfilter hooks
  184. Initializing Cryptographic API
  185. ksign: Installing public key data
  186. Loading keyring
  187. - Added public key 8301CD821788A86B
  188. - User ID: Red Hat, Inc. (Kernel Module GPG key)
  189. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  190. ACPI: Processor [CPU0] (supports C1, 8 throttling states)
  191. ACPI: Processor [CPU1] (supports C1, 8 throttling states)
  192. Real Time Clock Driver v1.12
  193. Linux agpgart interface v0.100 (c) Dave Jones
  194. serio: i8042 AUX port at 0x60,0x64 irq 12
  195. serio: i8042 KBD port at 0x60,0x64 irq 1
  196. Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
  197. ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  198. ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  199. RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
  200. divert: not allocating divert_blk for non-ethernet device lo
  201. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  202. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  203. ESB2: IDE controller at PCI slot 0000:00:1f.1
  204. ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
  205. ESB2: chipset revision 9
  206. ESB2: not 100% native mode: will probe irqs later
  207.     ide0: BM-DMA at 0x18c0-0x18c7, BIOS settings: hda:pio, hdb:DMA
  208. Probing IDE interface ide0...
  209. hdb: GIGABYTE GO-D160A, ATAPI CD/DVD-ROM drive
  210. Using cfq io scheduler
  211. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  212. Probing IDE interface ide1...
  213. Probing IDE interface ide2...
  214. Probing IDE interface ide3...
  215. Probing IDE interface ide4...
  216. Probing IDE interface ide5...
  217. hdb: ATAPI 40X DVD-ROM drive, 2048kB Cache, UDMA(33)
  218. Uniform CD-ROM driver Revision: 3.20
  219. ide-floppy driver 0.99.newide
  220. usbcore: registered new driver hiddev
  221. usbcore: registered new driver usbhid
  222. drivers/usb/input/hid-core.c: v2.0:USB HID core driver
  223. mice: PS/2 mouse device common for all mice
  224. input: AT Translated Set 2 keyboard on isa0060/serio0
  225. input: PS/2 Generic Mouse on isa0060/serio1
  226. md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
  227. NET: Registered protocol family 2
  228. IP route cache hash table entries: 262144 (order: 8, 1048576 bytes)
  229. TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  230. TCP bind hash table entries: 262144 (order: 9, 3145728 bytes)
  231. TCP: Hash tables configured (established 262144 bind 262144)
  232. Initializing IPsec netlink socket
  233. NET: Registered protocol family 1
  234. NET: Registered protocol family 17
  235. ACPI: (supports S0 S4 S5)
  236. ACPI wakeup devices:
  237. BPD1 BMF3 P0P4 P0P6 PEX0 PEX1 PCIB COMA COMB
  238. Freeing unused kernel memory: 184k freed
  239. SCSI subsystem initialized
  240. Adaptec aacraid driver (1.1-5[2412])
  241. ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 177
  242. PCI: Setting latency timer of device 0000:03:00.0 to 64
  243. ServeRAID0: kernel 5.2-0[11829]
  244. ServeRAID0: monitor 5.2-0[11829]
  245. ServeRAID0: bios 5.2-0[11829]
  246. ServeRAID0: serial dfb400
  247. ServeRAID0: 64 Bit DAC enabled
  248. scsi0 : ServeRAID
  249.   Vendor: ServeRA   Model: 8k-l Volume       Rev: V1.0
  250.   Type:   Direct-Access                      ANSI SCSI revision: 02
  251. SCSI device sda: 488017920 512-byte hdwr sectors (249865 MB)
  252. sda: Write Protect is off
  253. sda: Mode Sense: 03 00 00 00
  254. SCSI device sda: drive cache: write through
  255. SCSI device sda: 488017920 512-byte hdwr sectors (249865 MB)
  256. sda: Write Protect is off
  257. sda: Mode Sense: 03 00 00 00
  258. SCSI device sda: drive cache: write through
  259. sda: sda1 sda2 sda3 sda4
  260. Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
  261. kjournald starting.  Commit interval 5 seconds
  262. EXT3-fs: mounted filesystem with ordered data mode.
  263. SELinux:  Disabled at runtime.
  264. SELinux:  Unregistering netfilter hooks
  265. inserting floppy driver for 2.6.9-42.ELsmp
  266. floppy0: no floppy controllers found
  267. tg3.c:v3.52-rh (Mar 06, 2006)
  268. ACPI: PCI interrupt 0000:10:00.0[A] -> GSI 16 (level, low) -> IRQ 169
  269. PCI: Setting latency timer of device 0000:10:00.0 to 64
  270. divert: allocating divert_blk for eth0
  271. eth0: Tigon3 [partno(BCM95721) rev 4201 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:1a:64:48:0b:6c
  272. eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[1]
  273. eth0: dma_rwctrl[76180000]
  274. hw_random: RNG not detected
  275. ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 17 (level, low) -> IRQ 185
  276. ehci_hcd 0000:00:1d.7: EHCI Host Controller
  277. PCI: Setting latency timer of device 0000:00:1d.7 to 64
  278. ehci_hcd 0000:00:1d.7: irq 185, pci mem f881e000
  279. ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  280. PCI: cache line size of 32 is not supported by device 0000:00:1d.7
  281. ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
  282. hub 1-0:1.0: USB hub found
  283. hub 1-0:1.0: 8 ports detected
  284. USB Universal Host Controller Interface driver v2.2
  285. ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 185
  286. uhci_hcd 0000:00:1d.0: UHCI Host Controller
  287. PCI: Setting latency timer of device 0000:00:1d.0 to 64
  288. uhci_hcd 0000:00:1d.0: irq 185, io base 00001800
  289. uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  290. hub 2-0:1.0: USB hub found
  291. hub 2-0:1.0: 2 ports detected
  292. ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
  293. uhci_hcd 0000:00:1d.1: UHCI Host Controller
  294. PCI: Setting latency timer of device 0000:00:1d.1 to 64
  295. uhci_hcd 0000:00:1d.1: irq 177, io base 00001820
  296. uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  297. hub 3-0:1.0: USB hub found
  298. hub 3-0:1.0: 2 ports detected
  299. ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 177
  300. uhci_hcd 0000:00:1d.2: UHCI Host Controller
  301. PCI: Setting latency timer of device 0000:00:1d.2 to 64
  302. uhci_hcd 0000:00:1d.2: irq 177, io base 00001840
  303. uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  304. hub 4-0:1.0: USB hub found
  305. hub 4-0:1.0: 2 ports detected
  306. ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
  307. uhci_hcd 0000:00:1d.3: UHCI Host Controller
  308. PCI: Setting latency timer of device 0000:00:1d.3 to 64
  309. uhci_hcd 0000:00:1d.3: irq 169, io base 00001860
  310. uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  311. hub 5-0:1.0: USB hub found
  312. hub 5-0:1.0: 2 ports detected
  313. md: Autodetecting RAID arrays.
  314. md: autorun ...
  315. md: ... autorun DONE.
  316. usb 3-1: new low speed USB device using address 2
  317. input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1
  318. usb 3-2: new low speed USB device using address 3
  319. input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2
  320. NET: Registered protocol family 10
  321. Disabled Privacy Extensions on device c0344160(lo)
  322. IPv6 over IPv4 tunneling driver
  323. divert: not allocating divert_blk for non-ethernet device sit0
  324. mtrr: type mismatch for d0000000,1000000 old: uncachable new: write-combining
  325. drivers/usb/input/hid-input.c: event field not found
  326. ACPI: Power Button (FF) [PWRF]
  327. EXT3 FS on sda2, internal journal
  328. device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
  329. device-mapper: dm-multipath version 1.0.4 loaded
  330. cdrom: open failed.
  331. kjournald starting.  Commit interval 5 seconds
  332. EXT3 FS on sda1, internal journal
  333. EXT3-fs: mounted filesystem with ordered data mode.
  334. SGI XFS from kernel-module-xfs-2.6.9-42.ELsmp-0.2-1 rpm with ACLs, security attributes, realtime, large block numbers, no debug enabled
  335. SGI XFS Quota Management subsystem
  336. XFS mounting filesystem sda4
  337. Ending clean XFS mount for filesystem: sda4
  338. Adding 4192956k swap on /dev/sda3.  Priority:-1 extents:1
  339. IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
  340. microcode: No new microdata for cpu 0
  341. microcode: No new microdata for cpu 1
  342. IA-32 Microcode Update Driver v1.14 unregistered
  343. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
  344. parport0: irq 7 detected
  345. ip_tables: (C) 2000-2002 Netfilter core team
  346. ip_tables: (C) 2000-2002 Netfilter core team
  347. MSI INIT SUCCESS
  348. tg3: eth0: Link is up at 100 Mbps, full duplex.
  349. tg3: eth0: Flow control is on for TX and on for RX.
  350. i2c /dev entries driver
  351. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
  352. parport0: irq 7 detected
  353. lp0: using parport0 (polling).
  354. lp0: console ready
  355. eth0: no IPv6 routers present
  356. mtrr: type mismatch for d0000000,1000000 old: uncachable new: write-combining
  357. cdrom: open failed.
  358. cdrom: open failed.
  359. cdrom: open failed.
复制代码
1stchina

论坛徽章:
0
2楼 [报告]
发表于 2007-07-24 17:25 |只看该作者
这个不是吗？

SCSI device sda: 488017920 512-byte hdwr sectors (249865 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
SCSI device sda: drive cache: write through
SCSI device sda: 488017920 512-byte hdwr sectors (249865 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3 sda4
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
fhtt0606

论坛徽章:
0
3楼 [报告]
发表于 2007-07-24 17:30 |只看该作者
Red Hat Enterprise Linux 4 Update 1 中，下列裝置驅動程式已被更新：
...
序列 ATA（SATA）裝置（sata 驅動程式）
...
我的版本是Red Hat Enterprise Linux AS release 4 (Nahant Update 4)
为啥还不能认出来那？？？？？
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
fhtt0606

论坛徽章:
0
4楼 [报告]
发表于 2007-07-24 17:32 |只看该作者
原帖由 1stchina 于 2007-7-24 17:25 发表
这个不是吗？

SCSI device sda: 488017920 512-byte hdwr sectors (249865 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
SCSI device sda: drive cache: write through
SCSI device sda ...


这是原来的盘
[root@ebs ~]# fdisk -l

Disk /dev/sda: 249.8 GB, 249865175040 bytes
255 heads, 63 sectors/track, 30377 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          66      530113+  83  Linux
/dev/sda2              67        2677    20972857+  83  Linux
/dev/sda3            2678        3199     4192965   82  Linux swap
/dev/sda4            3200       30377   218307285   8e  Linux LVM
我插入新的sata硬盘，认不出来。。。
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
fhtt0606

论坛徽章:
0
5楼 [报告]
发表于 2007-07-24 18:12 |只看该作者
自己顶一下，不要沉啊
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
pollyworks

论坛徽章:
0
6楼 [报告]
发表于 2007-07-24 18:15 |只看该作者
貌似 需要 在 BIOS 里挂一下？
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
pollyworks

论坛徽章:
0
7楼 [报告]
发表于 2007-07-24 18:15 |只看该作者
貌似 需要 在 BIOS 里挂一下？
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
fhtt0606

论坛徽章:
0
8楼 [报告]
发表于 2007-07-24 18:20 |只看该作者
我是菜鸟，你的意思是在开机的时候需要进入bios设置？
那。。。怎么设置呢？能否指点一下？
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
prettywolf

论坛徽章:
0
9楼 [报告]
发表于 2007-07-24 19:01 |只看该作者
进入BIOS中把SATA工作模式改为IDE或PATA
或者编译最新版本的内核,选择相应的SATA芯片支持
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
fhtt0606

论坛徽章:
0
10楼 [报告]
发表于 2007-07-24 20:10 |只看该作者
已经解决，需要在raid控制器中配置～
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
12下一页
返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号：11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们：huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP