新手请大家帮忙!!!5555555555555

knife1983

我是一个新手,为什么在我的ADAPTEC scsi 型号为29320,装不了SCO UNIX
大家有没详细的安装步骤.救救小猫了.先谢各位大人了..

秋意正浓

有驱动吗？安装的时候加载BTLD就可以了。
boot
：link
然后根据提示输入驱动名即可。
ad160

knife1983

我在网上下载了一个驱动,里面有几个目录,是把他们全解压在软盘里,还是只要DRIVER目录

knife1983

大家给个详细做BTLD驱动的步骤好不好

秋意正浓

只要一个for sco的驱动，看一下readme，应该有做BTLD盘的方法。

knife1983

没办法英文太差了,帮忙了
3. Installation Instructions

   3.1. Installing Sco Open Server 5.0.7 with an Ultra320
        SCSI Controller

        1) Install the Ultra320 adapter and power on your system.
        2) Boot from the 5.0.7 CDROM.
        3) Type in "restart link=ad320" when prompt with boot:
        4) Insert the Adaptec btld driver disk for U320.
        5) The driver is copied into the install at this point.
           Continue installing the operating system as normal.
       
   3.2. Installing the Driver when the OS        is Already Installed

        1) Insert the Adaptec Sco U320 HBA driver disk into
           the floppy drive.
        2) Type in:

           mount /dev/fd0 /mnt
                        btldinstall /mnt

           and press enter. Wait for the post install script
           ask for the name of the module then keyin the module name
                        and enter.
        3) Make sure to relink the kernel by issuing the command
           "/etc/conf/bin/idbuild". After afew simple questions the
                        procedure is then done.


4. Command Line Options

        WARNING: ALTERING OR ADDING THESE DRIVER PARAMETERS
                 INCORRECTLY CAN RENDER YOUR SYSTEM INOPERABLE.
                 USE THEM WITH CAUTION.

   Edit the file "space.c" in the directory
   /etc/conf/pack.d/ad320 in order to change the following
   commands:
   ----------------------------------------------------------------
              Option: ad320_do_tagged=[0,1]
          Definition: Enables/disables tagged command queuing for
                      all drives.
     Possible Values: 0 (off), 1 (on)
       Default Value: 1 (on)
   ----------------------------------------------------------------
              Option: ad320_do_sgatter=[0,1]
          Definition: Enables/disables sgatter/gather for
                      all drives.
     Possible Values: 0 (off), 1 (on)
       Default Value: 1 (on)
   ----------------------------------------------------------------
              Option: ad320_hw_map=[0,1]
          Definition: switch between I/O mapped mode and memory mapped
                      mode.
     Possible Values: 0 (I/O mapped), 1 (Memory mapped)
       Default Value: 0 (I/O mapped)
   ----------------------------------------------------------------
              Option: ad320_scan_lun=[0,1]
          Definition: switch between I/O scan lun and not to scan lun
                      mode.
     Possible Values: 0 (not to scan lun), 1 (scan lun)
       Default Value: 0 (lun scanning disabled)
   ----------------------------------------------------------------
            

5. Additional Notes
   
   5.1. Operating System or Technology Limitations

        5.1.1. Open Server 5.0.7 don't supports
               ACPI Power Management.

        5.1.2. Ultra320 hard disk drive support

               Adaptec only supports Ultra320 hard drives that have
               the latest firmware available. Please check with
               your hard drive manufacturer to ensure you have the
               latest version.

秋意正浓

这是安装的步骤，没有讲做出BTLD的方法，在哪里下载的，我去看看，然后告诉你吧。

knife1983

先谢谢你了