- 论坛徽章:
- 0
|
集成显卡的机子，我前几天下载了FC5和FC6，发现FC5一切正常，即在安装完后重启后有配置显卡声卡等的向导，配置完成后能进入X界面，使用一切正常，但当我在同一机子上装了FC6后，安装完重启后有提示启动X SERVER 失败，然后不管怎么样都没办法进入界面，不管用startx或x86configure等都无效，在安装完后重启就没有进入显卡和声卡等配置界面，但还是能进入命令模式，打入INIT 5后无反应，但INIT 0等其它可以，我进/etc/x11下看了，没有发现诸如x86config的配置文件夹，只有个xorg.conf文件，但里面没什么东东，应该能确定FC6根本就没有去配置显卡声卡等，没有这些硬件的相关信息，请问我下的这个FC6本身软件有问题还是什么原因？奇怪的是FC5都很正常，版本越高越不行？不太可能有这种现象，非常感谢各位抽时间来看我这贴，谢谢！
启动后出现：
X Window System Version 7.0.0
Release Date :21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System : Linux 2.6.9-22.18.bz155725. Elsmp i686 Red Hat, Inc.
Current Operating System :Linux localhost.localdomin 2.6.15-1.2054_FC5 #1 Tue Mar 14 15:48:33 Est 2006 i686
Build Date :06 March 2006
Before reporting problems, check http://wiki.X.org
to make sure that you have the latest version.
Module Loader Present
Markers: (--)probed,(**)from config file, (==)default setting ,
(++)from command line , (!!)notice ,(II) infor mational,
(WW) warning ,(EE)error ,(NI) not implemented ,(??)unknown.
(==) Log file :"/var/log/Xorg.o.log ", Time :Mon May 8 01:12:06 2006
(==) Using config file :"/etc/X11/xorg.conf"
(WW) RADEON:NO matching Device section for instance (BusID PCI :5:0:1)found
(EE) No devices detected.
Fatal server eroor:
no screens found
SIO :fatal IO erry 104 ( Connection reset by peer ) on X server ":0.0"
after 0 requests (0 known processed ) with 0 events remaining .
输入startx后最后两行提示：
Couldn't start X server on card 0
Error, failed to start X server.
输入system-config-display后压根什么都看不到。
还有一个情况：我这机子装REDHAT 9时也一切正常的！ |
|
免费注册
发表于 2007-05-31 12:37
