fc下安装vmware tool

davidxueer

1.安装c编译器
[root@localhost ~]# yum install gcc
2.安装kernel-devel
[root@localhost ~]# yum install kernel-devel
3.检查kernel跟kernel-devel的版本号
[root@localhost ~]# uname -r
2.6.18-1.2798.fc6
[root@localhost ~]# rpm -q kernel-devel
kernel-devel-2.6.18-1.2849.fc6
4.两个版本号不一致，进行升级
[root@localhost ~]# yum -y upgrade kernel kernel-devel
5.再次检查版本号，还不一致，需要重启。
[root@localhost ~]# uname -r
2.6.18-1.2798.fc6
[root@localhost ~]# rpm -q kernel-devel
kernel-devel-2.6.18-1.2849.fc6
[root@localhost ~]# reboot
6.重启后，版本号一致。
[root@localhost ~]# uname -r
2.6.18-1.2849.fc6
[root@localhost ~]# rpm -q kernel-devel
kernel-devel-2.6.18-1.2849.fc6
7.用ls命令查看匹配kernel的c编译器的header的路径
[root@localhost ~]# ls -d /usr/src/kernels/$(uname -r)*/include
/usr/src/kernels/2.6.18-1.2849.fc6-i686/include（记住该路径，安装vmware-tool时需要用到）
8.安装vmware-tool。先释放鼠标，在vmware中选择安装vmware-tool，进入fc6，打开光驱，拷贝VMware- workstation-5.5.2-29772.tar.gz，将其解压到任何位置。解压后，双击vmware-install.pl，选择在终端运行，然后一直按默认设置，一路按回车键到
Trying to find a suitable vmhgfs module for your running kernel.
None of the pre-built vmhgfs modules for VMware Tools is suitable for your
running kernel.   Do you want this program to try to build the vmhgfs module for
your system (you need to have a C compiler installed on your system)? [yes]
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
9.直到该步骤，拷贝粘贴第7步的路径，然后一直按回车，直到选择屏幕分辨率。
What is the location of the directory of C header files that match your running
kernel? [/usr/src/kernels/2.6.18-1.2849.fc6-i686/include]
........  
Detected X.org version 7.1.
10.到了该步骤，问你是否改变X-window的设置，选y，就可以改变分辨率。
Do you want to change your guest X resolution? (yes/no) [no] y
Please choose one of the following display sizes (1 - 13):
[1]   "640x480"
[2]< "800x600"
[3]   "1024x768"
[4]   "1152x864"
[5]   "1280x800"
[6]   "1152x900"
[7]   "1280x1024"
[8]   "1376x1032"
[9]   "1400x1050"
[10]   "1680x1050"
[11]   "1600x1200"
[12]   "1920x1200"
[13]   "2364x1773"
Please enter a number between 1 and 13:
[3]
11.到了这步，千万别重启看效果，还要修改xorg config设置，不然重启后会报X-WINDOWS出错。
进入/etc/X11/，用文本打开xorg.conf，加上以下几段：
Section "Monitor"
         Identifier    "vmware"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "vmmouse"
Option "Protocol" "Auto"
Option "Device" "/dev/input/mouse0"
EndSection
然后找到 含有"ServerLayout" 的section, 在Section跟EndSection之间加上以下一行。
InputDevice "Mouse0" "CorePointer"
12.终于大功告成，重启看看效果了。
               
               
               

本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/941/showart_299860.html