在CentOS4.4配置zhcon-0.2.6（支持UTF-8）

anima

在CentOS4.4配置zhcon-0.2.6（支持UTF-8）
一、解压缩、打补丁：
[root@fish installing]# tar zxvf zhcon-0.2.5.tar.gz
[root@fish installing]# gunzip zhcon-0.2.5-to-0.2.6.diff.gz
[root@fish installing]# cd zhcon-0.2.5/
[root@fish zhcon-0.2.5]# patch -p1 二、编译、安装：
[root@fish zhcon-0.2.5]# ./configure
[root@fish zhcon-0.2.5]# make && make install
[root@fish zhcon-0.2.5]# whereis zhcon
zhcon: /usr/local/bin/zhcon /usr/local/etc/zhcon.conf /usr/local/lib/zhcon
三、查看帮助：
[root@fish zhcon-0.2.5]# zhcon --help
zhcon
A Fast CJK Console Environment
Usage: zhcon [OPTIONS]... [FILES]...
  -h, --help        Print help and exit
  -V, --version     Print version and exit
      --utf8        use iconv filter to convert UTF-8 stream from/to system
                      encoding  (default=off)
      --drv=STRING  specify video driver (auto, fb, ggi, vga)  (default=`auto')
四、查看配置：
[root@fish zhcon-0.2.5]# gedit /usr/local/etc/zhcon.conf
#this is config file for zhcon
#it can be named as ~/.zhconrc or /etc/zhcon.conf
#you can edit it manually
#zhconpath = /usr/local/lib/zhcon/
#unicon(3.x) path
uniconpath = /usr/lib/unicon/
#defaultencode: default encoding can be :gb2312,gbk,big5,jis,ksc
defaultencode = gb2312
#autoencode: auto detect current Chinese encoding(GB2312 or BIG5)
#when autoencode is set zhcon will try to detect current Chinese encoding
#after idle 1 second and change current Chinese encoding to
#GB2312 or BIG5.This function is useful if you are viewing many text files
#with different encoding type.
#auto,auto-gb,auto-big5,manual
autoencode = manual
#screen resolution
#NOTE:
# 1) These only works on FreeBSD. On Linux these options will be IGNORED!
# 2) If your FreeBSD kernel has VESA support compiled in(with
#    "options VESA") and your display adapter support VESA(most cards will
#    do), you can set color_depth to 8 or higher. This means you can use
#    640x480x256 colors, 640x480x65536 colors, 800x600x256 colors...etc
#    BUT you will not able to use 640x480x16 colors! (Of course I don't
#    think you will want to run 16 colors mode at all :))
# 3) If your FreeBSD kernel has not VESA support(or you even don't know
#    what's kernel or what's VESA), you can only set color_depth to 4.
#    That is, you can only run 16 colors mode(VERY slowly).
# 4) Ok, if you don't understand me at all, it's OK. Just go and find a
#    FreeBSD wizard and ask him to compile a new kernel with VESA support
#    for you and ... emmmm ... explain all these stuff to you ...
#
x_resolution = 640
y_resolution = 480
# 4 bits = 16 colors, 8 bits = 256 colors, 16 bits = 64K colors, and so on..
# By defalut, 640X480X16 color is used to support as many video cards as
# possible. zhcon works very SLOWLY under this mode. You should try setting
# color_depth=8 to use 256 color (VESA mode) after recompiling your kernel
# with VESA support to gain most out of your hardware.
color_depth = 4
#blanklineheight must >= 0
blanklineheight = 1
#0, default(block); 1, none; 2, underline
#3, 1/3 block; 4, 1/2 block; 5, 2/3 block; 6, block
cursortype = 6
beep = on
#whether to display startup message
startupmsg = on
#whether to enter prompt mode when start
#you can enter prompt mode by press CTRL-ALT-0
promptmode = off
# set font name, all font must be placed in PREFIX/lib/zhcon/
# for use with 24 pixel font
# ascfont = font/asc24.bpsf
# gbfont = font/gb-24-kai.bpsf
ascfont = font/asc16.bpsf
gbfont = font/gb-16.bpsf
gbkfont = font/gbk-16.bpsf
big5font = font/big5-16.bpsf
jisfont = font/jis-16.bpsf
kscfont = font/ksc-16.bpsf
#inputstyle: overspot or nativebar
inputstyle = overspot
# color scheme format
# text's fore, back, color1, color2, frame's light, dark color
# change push style to pop by swap frame's light/dark color
# red style = 15,4,11,14,12,0
# blue style = 15,1,11,14,9,0
# white style = 0,7,1,1,15,8
overspotcolor = 0,7,1,1,15,8
nativebarcolor = 15,4,11,14,0,12
showtips = on
#change input method here
#the first ime is the default ime when press CTRL_SPACE
#only the first nine imes are avaiable to zhcon
#you can add more ime from Chinput's config file
#format: ime = imename,module,table,encode,type
#imename :=
#module :=
#table :=
#encode := gb2312 | gbk | big5
#type := native | unicon
ime = 全拼,,input/winpy.mb,gb2312,native
ime = 五笔,,input/wb.mb,gb2312,native
ime = 双拼,,input/winsp.mb,gb2312,native
ime = ︽?30,,input/big5-ary30.mb,big5,native
ime = ?緀,,input/big5-cj.mb,big5,native
ime = 猔?,,input/big5-phone.mb,big5,native
ime = 礚郊μ,,input/big5-liu5.mb,big5,native
ime = 智能拼音,cce_pinyin.so,cce,gb2312,unicon
ime = GBK拼音,TL_hzinput.so,gbk/gbkpy_mb.tab,gbk,unicon
ime = 自然码,TL_hzinput.so,gb/zrm-2.tab,gb2312,unicon
ime = ?惧块な,TL_hzinput.so,big5/pinyin.tab,big5,unicon
ime = ?緀块?,TL_hzinput.so,big5/cj.tab,big5,unicon
ime = 虏块?,TL_hzinput.so,big5/simplex.tab,big5,unicon
ime = 全拼2,,input/py.mb,gb2312,native
ime = 双拼2,,input/py.mb,gb2312,native
ime = 大众,,input/dzm.mb,gb2312,native
ime = 英中,,input/ed.mb,gb2312,native
ime = 简拼,,input/jp.mb,gb2312,native
ime = 普通,,input/pt.mb,gb2312,native
ime = 五笔二维,,input/wbew.mb,gb2312,native
ime = 五笔划,,input/wbh.mb,gb2312,native
ime = 繁体仓颉,,input/cjf.mb,gb2312,native
ime = 简体仓颉,,input/cjj.mb,gb2312,native
五、修改配置：
[root@fish zhcon-0.2.5]# cp /usr/local/etc/zhcon.conf /usr/local/etc/zhcon.conf.myBak
[root@fish zhcon-0.2.5]# vim /usr/local/etc/zhcon.conf
修改如下部分：
#x_resolution = 640
#y_resolution = 480
x_resolution = 800
y_resolution = 600
#color_depth = 4
color_depth = 8
六、使用UTF-8编码：
在字符终端模式下：
[lwg@fish ~]$ zhcon --utf8
               
               
               

本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/22178/showart_235318.html