- 论坛徽章:
- 0
|
引用:http://blog.donews.com/etony/archive/2005/01/10/232902.aspx
************************************
安装之前的准备:
*************************************
核心介绍:
---------------------------------------------------------------------------------------------------
gentoo 预设 2.4核心并且支持 framebuffer
smp 2.6 核心支持多个CPU
gentoo-nofb 和 gentoo 一样,但是关闭了对 framebuffer 的支持
smp-nofb 和 smp 一样,但是关闭了对 framebuffer 的支持
memtest86 检查你的内存是否有错误
----------------------------------------------------------------------------------------------------
核心参数:
----------------------------------------------------------------------------------------------------
- agpgart 载入 agpart (如果你有显示的问题)
- doscsi 寻找 scsi 设备 (有时候会让某些网卡无法工作)
- nodetect 让 hwsetup/kudzu 和 hotplug 无法执行
- dofirewire 在 initrd 载入 firewire 模块 (firewire 光驱,等等)
- nousb 从 initrd 关闭 usb 模块,关闭 hotplug
- nodhcp 如果检测到网卡,让dhcp无法自动分配ip
- doataraid 从 initrd 载入 raid 模块
- dopcmcia 启用 pcmicia 服务
- noapm 关闭 apm 模块的载入
- noraid 关闭 evms 模块的载入
- nohotplug 关闭 hotplug 服务
- ide=nodma 针对无法使用的 ide 设备强迫关闭 dma
- docache 在执行时将光盘快取到内存,让你可以在安装时更换光盘
- dokeymap 开启 non-us 键盘的选择
- noapic 关闭 apic (如果硬件有问题,网卡,scsi等等)
- hdx=stroke (只适合 smp/smp-nofb 核心)允许你在BIOS不支持大容量硬盘时,
还是可以分割整个硬盘
----------------------------------------------------------------------------------------------------
*启动live cd:
boot: gentoo dopcmcia
如果你要查看CD上的文件时,你可以使用links2命令:
# links2 /mnt/cdrom/docs/html/index.html
如果你要启动 SSH 服务:
# /etc/init.d/sshd start
*微调硬盘性能:
用下面的命令来测试你的硬盘性能
# hdparm -tT /dev/hda
范例:
启动DMA:
# hdparm -d 1 /dev/hda
启动DMA + 安全的增加性能:
# hdparm -d 1 -A 1 -m 16 -u 1 -a 64 /dev/had
*设定代理服务器:
(如果是HTTP 代理服务器)
# export http_proxy=http://proxy.gentoo.org:8080
(如果是 FTP 代理服务器)
# export ftp_proxy="
ftp://proxy.gentoo.org:8080
"
(如果是 RSYNC 代理服务器)
# export RSYNC_PROXY="proxy.gentoo.org:8080"
如果需要帐号和密码,按照下面的格式将""中的替换:
http://username:password@server
*设定网络环境:
# net-setup eth0
如果使用PPPoE链接到网络
# adsl-setup
# adsl-start
如果有错请仔细检查 /etc/ppp/pap-secrets 或是 /etc/ppp/chap-secrets 查看你的帐号和密码。
**手动设定网络:
查找可以用的核心模块:
# ls /lib/modules/`uname -r` /kernel/drivers/net
# modprobe pcnet32
使用DHCP获取ip:
# dhcpd eth0 或 # dhcpd -HD eth0
************************************ 安装准备结束 **************************************
1.先给硬盘分区
# fdisk /dev/hda
2.格式化每个分区
# mke2fs -j /dev/hda1 //格式化成 ext3
# mkswap /dev/hda2
# mkfs.xfs /dev/hda3 //格式化成xfs
****************************************************************
# mke2fs /dev/hda1 //格式化成 ext2
# mkreiserfs /dev/hda3 //格式化成reiserfs
# mkfs.reiser4 /dev/hda3 //格式化成reiserfs4
# mkfs.jfs /dev/hda3 //格式化成jfs
****************************************************************
3.启用 swap 分区
# swapon /dev/hda2
4.挂载
# mount /dev/hda3 /mnt/gentoo
# mkdir /mnt/gentoo/boot
# mount /dev/hda1 /mnt/gentoo/boot
5.设定时间
# date
# date 090911452004 (格式:data MMDDhhmmYYYY M为月,D为日,h为时,m为分,Y为年)
6.安装stage档
# cd /mnt/gentoo
# tar -xvjpf /mnt/cdrom/stages/stage3-i686.tar.bz2
# tar -xvjf /mnt/cdrom/snapshots/portage-20040710.tar.bz2 -C /mnt/gentoo/usr
建立目录distfiles并从光盘上拷贝所有文件
# mkdir /mnt/gentoo/usr/portage/distfiles
# cp /mnt/cdrom/distfiles/* /mnt/gentoo/usr/portage/distfiles/
7.准备和配置编译
# nano -w /mnt/gentoo/etc/make.conf
//如果下载的stage和你的机器比较匹配,那几乎不需要改动什么的。其他参数可以参考 /mnt/gentoo/etc/make.conf.example
为chroot作准备
# mount -t proc none /mnt/gentoo/proc
8.拷贝 DNS配置
# cp -L /etc/resolv.conf /mnt/gentoo/etc/resolv.conf
9.Chroot 进入新的编译环境
# chroot /mnt/gentoo /bin/bash
# env-update
Regenerating /etc/ld.so.cache...
# source /etc/profile
选择镜像
# mirrorselect -a -s4 -o | grep 'GENTOO_MIRRORS=' >> /mnt/gentoo/etc/make.conf
10.更新 Portage
# emerge sync {如果不能完成,就用下面的命令 # emerge-webrsync }
11.USE设置
查看可用的USE参数
# less /usr/portage/profiles/use.desc
# nano -w /etc/make.conf
加入: USE=" nls cjk -gtk -gnome qt kde alsa"
LINGUAS="zh_CN"
12.Stage 安装的三个过程
Stage1 到 Stage2 的过程:
*********************************** 介绍bootstrapping:************************************
我们会 bootstrap 你的系统,这会花很长的时间,但是你会得到一个针对你的机器完全最佳化的系统。
Bootstrapping 代表编译 GNU C函数库、GNU C编译器以及其他重要的软件。
在开始之前,我们会列出两个你需要或是不需要的参数,
自由选择:先下载原始码
如果你之前没有复制所有的原始码,bootstrap script 会下载所有必要的文件,这当然在有链接到网络时才能正常工作。如果你想要下载原始码然后再执行 bootstrap,使用bootstrap 的 -f 选项,这样会下载所有的原始码。
*********************************** 介绍bootstrapping:************************************
# cd /usr/portage
# scripts/bootstrap.sh -f
Bootstrapping 你的系统
# cd /usr/portage
# scripts/bootstrap.sh
Stage2 到 Stage3 的过程
*************************************** Content:****************************************
现在是编译所有系统组件的时候了。
所有系统组件?不,不完全是。在这一步骤中,你将会编译没有其他选择的系统组件。一些组件有多种选择(例如 system loggers),因为 Gentoo 代表选择,我们不会强迫你一定要使用哪儿一种。
自由选择:看会做哪儿些事
如果你想要知道哪儿些组件会被安装,执行 emerge -pretend system。这将会列出所有要编译的程序。因为这相当的多,你应该使用 less 或 more 来上下浏览。
*************************************** Content:****************************************
# emerge --pretend system | less
*************************************** Content:****************************************
自由选择:下载原始码
如果你想要 emerge 在开始之前先下载原始码(例如你不想在编译时链接在网络上),你可以使用的emerge 的 -fetchonly 参数来帮你下载所有的原始码。
*************************************** Content:****************************************
# emerge --fetchonly system
*************************************** Content:****************************************
编译系统
执行 emerge system 来开始编译系统。这需要花很长一段时间。
*************************************** Content:****************************************
# emerge system
*************************************** Content:****************************************
你现在可以安全的略过任何警告来更新你的设定档。
*************************************** Content:****************************************
# etc-update
13.编译内核
设置时区
# rm /etc/localtime
# ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
# nano -w /etc/rc.conf
修改使 CLOCK="PRC"
下载内核的源码包
@使用 2.4.X 内核
# emerge gentoo-sources
@使用 2.6.X 内核
# emerge gentoo-dev-sources
# ls -l /usr/src/linux
修改内核源码目录链接
*************************************** Content:****************************************
# rm /usr/src/linux
# cd /usr/src
# ln -s linux-2.4.26-gentoo-r6 linux
*************************************** Content:****************************************
配置内核编译选项
# cd /usr/src/linux
# make menuconfig
必须设定的选项:
*************************************** Content:****************************************
首先,设定 development and experimental code/drivers。你需要这个,不然你将无法看见一些其他重要的设定选项。
*************************************** Content:****************************************
Code maturity level options --->
Prompt for development and/or incomplete code/drivers
*************************************** Content:****************************************
记得在编译核心时选择正确的处理器类别:
*************************************** Content:****************************************
Processor type and features --->
(依照你的CPU所更换)
(Athlon/Duron/K7) Processor family
*************************************** Content:****************************************
现在到 File Systems 然后选择要支持的文件系统。记得不要将他们编成模块,还有 Virtual memory, /proc file system, /dev file system + Automatically mount at boot:
*************************************** Content:****************************************
(使用 2.4.x 核心)
File systems --->
Virtual memory file system support (former shm fs)
/proc file system support
/dev file system support (EXPERIMENTAL)
Automatically mount at boot
[ ] /dev/pts file system for Unix98 PTYs
(使用 2.6.x 核心)
File systems --->
Pseudo Filesystems --->
/proc file system support
/dev file system support (OBSOLETE)
Automatically mount at boot
Virtual memory file system support (former shm fs)
(按照你系统所需要的档案系统开启一下选项)
Reiserfs support
Ext3 journalling file system support
JFS filesystem support
Second extended fs support
XFS filesystem support
*************************************** Content:****************************************
如果你的BIOS 不能处理大容量的硬盘,而且你调整跳脚让硬盘回报受限制的容量,你需要开启下面设定让你的系统可以存取所有容量。
*************************************** Content:****************************************
(只适用 2.4.x 核心)
ATA/IDE/MFM/RLL support --->
IDE, ATA and ATAPI Block devices --->
Include IDE/ATA-2 DISK support
[ ] Use multi-mode by default
Auto-Geometry Resizing support
*************************************** Content:****************************************
如果你需要通过 PPPoE 链接到网络上,你需要以下的核心选项:
*************************************** Content:****************************************
(使用 2.4.x 核心)
Network device support --->
PPP (point-to-point protocol) support
PPP support for async serial ports
PPP support for sync tty ports
(使用 2.6.x 核心)
Device Drivers --->
Networking support --->
PPP (point-to-point protocol) support
PPP support for async serial ports
PPP support for sync tty ports
*************************************** Content:****************************************
虽然 PPP over Ethernet 选项只是有在 rp-pppoe 设定为核心 PPPoE 时需要,但是这两个压缩的选项不会造成错误。
如果你需要,不要忘了在核心里加入对网卡的支持。
如果你有一个支持 HyperThreading(tm) 的 Intel CPU,或是有多个 CPU ,你应该启用 "Symmetric multi-processing support":
*************************************** Content:****************************************
Processor type and features --->
Symmetric multi-processing support
*************************************** Content:****************************************
如果你使用 USB 输入装置,不要忘记开启它。
*************************************** Content:****************************************
USB Support --->
USB Human Interface Device (full HID) support
*************************************** Content:****************************************
编译安装核心:
*************************************** Content:****************************************
(核心 2.4)
# make dep && make bzImage modules modules_install
(核心 2.6)
# make && make modules_install
当核心完成编译后,将核心映像复制到 /boot
# cp arch/i386/boot/bzImage /boot/kernel-2.4.26-gentoo-r6
# cp System.map /boot/System.map-2.4.26-gentoo-r6
你也可以将你的核心设定文件备份到 /boot,以防万一。
# cp .config /boot/config-2.4.26-gentoo-r6
*************************************** Content:****************************************
我们也可以用Gentoo 提供的 genkernel 来编译内核。
*************************************** Content:****************************************
# emerge genkernel
# genkernel all
*************************************** Content:****************************************
当 genkernel 完成的时候,一个核心文件,一套模块和一个 initial root disk (initrd) 将会被建立。
我们将在稍后设定开机程序时使用核心映像档和 initrd 。initrd 将会在开启到"真正"的系统之前马上侦测硬件支持(就和 LiveCD 一样)。
*************************************** Content:****************************************
# ls /boot/kernel* /boot/initrd*
*************************************** Content:****************************************
现在,为了让我们的系统更像 LiveCD , 我们需要安装 hotplug。 当 initrd 自动侦测硬件时,hotplug将会自动侦测其他的硬件。
*************************************** Content:****************************************
# emerge hotplug
# rc-update add hotplug default
*************************************** Content:****************************************
如果你不喜欢它要安装的套件,使用 emerge -pretend -verbose 查看各套件需要使用到什么USE 参数:
*************************************** Content:****************************************
# emerge --pretend --verbose emu10k1
...
[ebuild N ] media-sound/aumix-2.8 +gpm +nls +gtk +gnome +alsa -gtk2
*************************************** Content:****************************************
以上的范例将可以看到 emu10k1 的相依性 必须依赖着 gtk和 gnome 的USE 参数,而 gtk (依赖着 xorg-x11 ) 将会被一起编译。
如果你不要编译全部,拿掉所有的USE 参数 如:
*************************************** Content:****************************************
# USE="-gpm -nls -gtk -gnome -alsa" emerge --pretend emu10k1
当你满意时,移除掉 -pretend 开始安装。
14.建立 /etc/fstab
# nano -w /etc/fstab
15.设定主机名称、域名和网络
# echo zbz > /etc/hostname
# echo homenetwork > /etc/dnsdomainname
# rc-update add domainname default
# nano -w /etc/conf.d/net
*************************************** Content:****************************************
(适用 DHCP)
iface_eth0="dhcp"
dhcpcd_eth0="-HD" 一些网络管理员会要求你使用DHCP 服务器指定的主机名称和域名称。在这种
情况下,加入底下的东西让 dhcpd 使用他们。这会取代你原本设定的主机名称
和域名称。
dhcpcd_eth0="-N" 如果你使用 NTP 来同步你的电脑时间,使用-N参数避免 dhcpd 覆盖你的
/etc/ntp.conf
(适用静态 IP)
iface_eth0="192.168.0.2 broadcast 192.168.0.255 netmask 255.255.255.0"
gateway="eth0/192.168.0.1"
(适用 rp-pppoe)
iface_eth0="up"
*************************************** Content:****************************************
# rc-update add net.eth0 default
# nano -w /etc/hosts
16.安装必要的系统工具
*************************************** Content:****************************************
如果你使用 stage3 文件的话,先移除 sysklogd 记录器
*************************************** Content:****************************************
# emerge unmerge sysklogd
*************************************** Content:****************************************
你也要删除 sysklogd init 指令文件
*************************************** Content:****************************************
# rm /etc/init.d/sysklogd
*************************************** Content:****************************************
现在安装你选择的系统记录器
*************************************** Content:****************************************
# emerge metalog
# rc-update add metalog default
如果你的一个分区是xfs的话
# emerge xfsprogs
如果你的一个分区是 reiserfs的话
# emerge reiserfsprogs
如果你的一个分区是 jfs的话
# emerge jfsutils
17.安装GRUB
# emerge grub
# nano -w /boot/grub/grub.conf
未使用genkernel的grub
*************************************** Content:****************************************
default 0 开机预设。0为第一,1为第二,以此类推
timeout 30 使用预设前等待的开机秒数
splashimage=(hd0,0)/grub/splash.xpm.gz 启用 splash-image
title=Gentoo Linux 2.4.26-r6
root (hd0,0) 储存核心文件的分割区
kernel /kernel-2.4.26-gentoo-r6 root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda3
title=Windows XP 启动windows
rootnoverify (hd0,5)
makeactive
chainloader +1
//Note: 如果你使用不同的分割设定或是核心文件,请按照自己的设定更改,但是确认所有 grub 相关的设备(如(hd0,0))和挂载点有相连的,而非 root。换句话说,(hd0,0)/grub/splash.xpm.gz 实际上是放在 /boot/grub/splash.xpm.gz 因为 (hd0,0) 是 /boot。
//如果你需要自行输入任何参数给核心,只要将他们放在 kenerl的指令后面。我们已经传送了一个(root=/dev/hda3 或是 real_root=/dev/hda3),但是你也可以传送其他的指令。
如:kernel /kernel-2.4.26-gentoo-r6 root=/dev/hda3 vga=788
*************************************** Content:****************************************
使用genkernel的grub
*************************************** Content:****************************************
default 0
timeout 30
splashimage=(hd0,0)/grub/splash.xpm.gz
title=Gentoo Linux 2.4.26-r6
root (hd0,0)
kernel /kernel-2.4.26-gentoo-r6 root=/dev/ram0 init=/linuxrc real_root=/dev/hda3
initrd /initrd-2.4.26-gentoo-r6
*************************************** Content:****************************************
# cp /proc/mounts /etc/mtab
# grub-install --root-directory=/boot /dev/hda
修改root密码:
# passwd
添加用户elang
# useradd elang -m -G users,wheel,audio,tty -s /bin/bash
# passwd elang
退出新环境。
# exit
18.卸载分区并重新启动:
# umount /mnt/gentoo/boot /mnt/gentoo/proc /mnt/gentoo
# reboot
重新启动后
如果核心是2.6.8的话,如果不是请 # emerge gentoo-dev-sources
安装GENSPLASH
*************************************** Content:****************************************
在你的/etc/make.conf里加入
# nano -w /etc/make.conf
加入 "ACCEPT_KEYWORDS=~x86"
或者:
在 /etc/portage/package.keywords 里加入
sys-kernel/gentoo-dev-sources ~x86
media-gfx/splashutils ~x86
*************************************** Content:****************************************
# ACCEPT_KEYWORDS=~x86 >> /etc/make.conf
重新设定并编译核心:
# cd /usr/src/linux
# make menuconfig
# make
# make install modules_install
*************************************** Content:****************************************
Device Drivers ---> Graphics support --->
Support for frame buffer devices
VESA VGA graphics support (NEW)
+ Console display driver support ---> Video mode selection support
Framebuffer Console support
Logo configuration --->
[ ] Bootup logo
Standard 224-color Linux logo (NEW)
Support for the framebuffer splash
*************************************** Content:****************************************
安装splashutils
# emerge splashutils
建立一个initramfs 图片
# splash_geninitramfs -v -g /boot/fbsplash-emergence-1024x768 -r 1024x768 emergence
重新配置grub
# cd /boot/grub
*************************************** Content:****************************************
title Gentoo Linux (g-d-s 2.6.8.1)
root (hd0,4)
kernel /boot/gentoo-2.6.8.1 ro root=/dev/hda1 video=vesafb:ywrap,pmipal,1024x768-32@75 splash=silent,theme:emergence
initrd /boot/fbsplash-emergence-1024x768
*************************************** Content:****************************************
曾经出现过错误,按照下面方法解决,然后重新开始:
*************************************** Content:****************************************
在/etc/splash/emergence/1024x768.cfg里配置好你的图片的路径,silent和verbose都要配置上
# rm /usr/src/linux/usr/initramfs_data.cpio.gz
# splash_geninitramfs -v -g /usr/src/linux/usr/initramfs_data.cpio.gz -r 1024x768 emergence
*************************************** Content:****************************************
我的make.conf
# These settings were set by the catalyst build script that automatically built this stage
# Please consult /etc/make.conf.example for a more detailed example
CFLAGS="-O2 -march=pentium4 -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
USE="nls cjk oss apache2 postgres ssl gd flash berkdb gdbm X gpm gnome2 gtk2 mmx sse sse2 dvd alsa png truetype -arts -qt -kde -pdflib"
#Use Prozilla
FETCHCOMMAND='/usr/bin/proz --no-getch -s ${URI} -P ${DISTDIR}'
我的.xinitrc
export LANG=zh_CN
export LC_ALL=zh_CN
export LC_CTYPE=zh_CN
export XIM=fcitx
export XIM_PROGRAM=fcitx
export
[email=XMODIFIERS=@im=fcitx]XMODIFIERS=@im=fcitx[/email]
fcitx &
#exec fvwm2
exec gnome-session
普通用户也可以重启或关机:
# emerge app-admin/sudo
# vi /etc/sudoers
yourusername ALL=(root)NOPASSWD:/sbin/halt
yourusername ALL=(root)NOPASSWD:/sbin/reboot
yourusername ALL=(root)NOPASSWD:/sbin/shutdown
# vi /usr/local/bin/halt
#!/bin/bash
sudo /sbin/halt
# chmod 755 /usr/local/bin/halt
鼠标滚轮使用
在/etc/X11/xorg.conf 里的鼠标section里加入
Option "ZAxisMapping" "4 5"
安装postgresql + php5 + apache2
# USE="postgresql apache2 -qt -qtmt -pdflib" emerge mod_php
*************************************** Content:****************************************
编辑/etc/conf.d/apache2,加入对php的支持:
APACHE2_OPTS="-D SSL -D PHP5"
编辑/etc/apache2/conf/apache2.conf,定义你的Server Name(即你自己的网站域名):
确认你的/etc/hostname和/etc/hosts里指向的名称相同,比如我/etc/hostname为WaterBlue- MoonLight,/etc/hosts里127.0.0.1指向的一是这个名称。两者不相同会导致你的apace启动失败。
ServerName
www.linuxsir.org
编辑 commonapache2.conf,让Apache使用GB2312为默认字符集
AddDefaultCharset GB2312
ServerSignature Off
*************************************** Content:****************************************
然后启动Apache2
# /etc/init.d/apache2 start
# rc-update add apache2 default
测试Apache2服务器和php
在/var/www/localhost/htdocs目录下新建index.php
内容:
保存,浏览
http://127.0.0.1/index.php
测试。
配置postgresql
给postgresql 指定存放数据的目录:
# mkdir /var/www/pgsql/data
# chown postgres /var/www/pgsql/data
以 postgres用户登陆
# su - postgres
初始化数据库
# /usr/bin/initdb -D /usr/local/pgsql/data
# /usr/bin/postmaster -D /usr/local/pgsql/data >logfile 2>&1 &
*************************************** Content:****************************************
建立测试数据库
# /usr/bin/createdb test
# /usr/bin/psql test
*************************************** Content:****************************************
打开tcp/ip链接:
修改 /usr/local/pgsql/data/postgresql.conf
port=5432
修改 /usr/local/pgsql/data/pg_hba.conf
加入
host all all 你的ip地址 你的子网掩码 trust
# nano -w /etc/conf.d/postgresql
# /etc/init.d/postgresql start
************************************ 安装桌面:*************************************
# emerge xorg-x11
# emerge kde (# emerge kde-i18n)或 # emerge xfce4 或 # emerge gnome 或 # emerge fvwm
# xorgconfig
# nano -w /etc/X11/xorg.conf
Option "ZaxisMapping" "4 5"
////////////////////使emerge 使用其他下载工具
编辑/etc/make.conf,加入
FETCHCOMMAND='/usr/bin/proz --no-getch -s ${URI} -P ${DISTDIR}'
当然先要emerge prozilla
安装软件在gentoo中有两种方法:
1.安装预编译的二进制包,好处不用自己编译,编译大的套件很花时间。预编译软件在/usr/portage/packages/All中。
2.下载源文件自动编译安装,慢但是根据自己的机器优化,这种时候就会受USE参数的影响,下载的源码在/usr/portage/distfiles中。
----------------------------------------------------------------------------------
以下都以mozilla为例,括号内为参数的缩写
1.想要编译安装软件:emerge mozilla
2.查看软件依赖哪些别的软件,实际并不编译安装:emerge --pretend mozilla (-p)
3.先下载软件,并不编译:emerge --fetchonly mozilla
4.查看要从哪里下载源码:emerge --pretend -fetchonly mozilla (-pf)如果你本地没有上网条件可以用它记下要下载的东西,去别处下载后带回来,把源码cp到正确的路径下再emerge
5.想安装一个特定版本的软件:emerge "mozilla-1.4" 将会安装比1.4新的版本
emerge "=mozilla-1.4"将会安装1.4版
6.安装预编译版本:emerge --usepkg mozilla (-k)
7.安装预编译软件,不在乎版本:emerge --usepkgonly mozilla (-K)
8.本地系统上没有预编译软件,可以从网上下载:在/etc/make.conf中用PORTAGE_BINHOST指定提供预编译好的二进制包的地址,然后emerge --getbinpkg mozilla (-g),这将会下载此软件和它依赖的二进制包并安装。要查看哪些依赖的软件将会被安装:
emerge --getbinpkg --pretend mozilla
9.本地系统有此软件的预编译包,但是就是想下载网上的预编译包来安装:
emerge --getbinpkgonly mozilla (-G)
10.指定预编译包版本:emerge --usepkg "mozila-1.4"
"=mozilla-1.4"
11.显示所有mozilla依赖的包:emerge --emptytree --pretend mozilla
12.不管依赖条件,尝试强行编译安装包:emerge --nodeps mozilla(可能会失败)
13.删除以安装的包:emerge unmerge mozilla 也可以用emerge -C mozilla
14.假装删除软件看看会删除什么依赖的包:emerge --pretend unmerge mozilla
15.安装被mask掉的软件:#ACCEPT_KETWORDS="~86" emerge mozilla
每个条目下列的两条指令是等效的,我通常用短的。
options都可以组合使用。
(第一条回楼上同学的问题)
避免升级覆盖掉版本更高的软件
emerge -uU world
emerge --update --upgradeonly world
查找名称包含mozilla的包
emerge -s mozilla
emerge search mozilla
查找描述包含mozilla
emerge -S mozilla
emerge --searchdesc mozilla
使用本地编好的包,没有就下源码(尽量避免编译)
emerge -k mozilla
emerge --usepkg mozilla
只使用本地编好的,否则不安装(绝对不编译,所有依赖的包都有binary才装)
emerge -K mozilla
emerge --usepkgonly mozilla
卸载
emerge -C mozilla
emerge unmerge mozilla
升级portage树
emerge sync
下载snapshot包来完成sync
emerge-webrsync
查看已安装包的changelog
emerge -pl mozilla
emerge --pretend --changelog mozilla
查看依赖关系(这个包还没装)
(--pretend保证这一次操作实际上不做任何事情,可以跟任何options组合)
emerge -p mozilla
emerge --pretend mozilla
只下载某个软件的源码(以及它所依赖的)
emerge -f mozilla
emerge --fetchonly mozilla
查看从哪下的源码
emerge -fp mozilla
安装指定版本号的
emerge "..........."
emerge -k " ~/.xinitrc
本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u/25969/showart_225767.html |
|