请帮我看看系统启动信息

zhengxianglun

一台LINUX　AS4.0　服务器总死机，是租用外地的机器，
请大家帮我看看这个机器的硬件有什么问题吗？


Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [IORG] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [KBC_] had invalid type (Integer) for Scope operator, changed to (Scope)
    ACPI-0584: *** Warning: Type override - [OEM_] had invalid type (Integer) for Scope operator, changed to (Scope)
CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09
per-CPU timeslice cutoff: 1462.89 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c03d9000 soft=c03b9000
Initializing CPU#1
Calibrating delay loop... 4767.74 BogoMIPS (lpj=2383872)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: After all inits, caps:        bfebf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09
Booting processor 2/2 eip 3000
CPU 2 irqstacks, hard=c03da000 soft=c03ba000
Initializing CPU#2
Calibrating delay loop... 4767.74 BogoMIPS (lpj=2383872)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: After all inits, caps:        bfebf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09
Booting processor 3/3 eip 3000
CPU 3 irqstacks, hard=c03db000 soft=c03bb000
Initializing CPU#3
Calibrating delay loop... 4767.74 BogoMIPS (lpj=2383872)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps:        bfebf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
CPU3: Thermal monitoring enabled
CPU3: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09
Total of 4 processors activated (19005.44 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...  failed.
...trying to set up timer as Virtual Wire IRQ... works.
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 1047k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [NRTH] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
ACPI: PCI Interrupt Routing Table [\_SB_.NRTH._PRT]
ACPI: PCI _CRS 1 overrides _BBN 0
ACPI: PCI Root Bridge [PCI1] (00:01)
PCI: Probing PCI hardware (bus 01)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI _CRS 2 overrides _BBN 0
ACPI: PCI Root Bridge [PCI2] (00:02)
PCI: Probing PCI hardware (bus 02)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 *5 7 12 14 15)
ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 *7 12 14 15)
ACPI: PCI Interrupt Link [LN07] (IRQs *3 4 5 7 12 14 15)
ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN20] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN21] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN22] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN23] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN24] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN25] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN26] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN27] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN28] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN29] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN30] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN31] (IRQs 3 4 5 7 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNUS] (IRQs *10)
ACPI: PCI Interrupt Link [LNID] (IRQs 11) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNUS] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 23 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 22 (level, low) -> IRQ 185
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1167512058.266:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key E07BC3E85BE30CFD
- User ID: Red Hat, Inc. (Kernel Module GPG key)

zhengxianglun

pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 262144K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB6: IDE controller at PCI slot 0000:00:0f.1
SvrWks CSB6: chipset revision 160
SvrWks CSB6: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: CD-224E, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 43690)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
NRTH PS2K  USB SLT1 SLT2 LAN0 LAN1 PWRB
Freeing unused kernel memory: 172k freed
SCSI subsystem initialized
Fusion MPT base driver 3.01.16
Copyright (c) 1999-2004 LSI Logic Corporation
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 169
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
Fusion MPT SCSI Host driver 3.01.16
scsi0 : ioc0: LSI53C1030, FwRev=01030700h, Ports=1, MaxQ=222, IRQ=169
  Vendor: LANGCHAO  Model: ATLAS10K4_36SCA   Rev: DFV3
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sda: 71833096 512-byte hdwr sectors (36779 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
  Vendor: SDR       Model: GEM318P           Rev: 1
  Type:   Processor                          ANSI SCSI revision: 02
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
cdrom: open failed.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
security:  3 users, 4 roles, 316 types, 20 bools
security:  53 classes, 9815 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Attached scsi generic sg1 at scsi0, channel 0, id 8, lun 0,  type 3
inserting floppy driver for 2.6.9-5.ELsmp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
e1000: Ignoring new-style parameters in presence of obsolete ones
Intel(R) PRO/1000 Network Driver - version 5.3.19-k2-NAPI
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 23 (level, low) -> IRQ 177
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
divert: allocating divert_blk for eth0
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 22 (level, low) -> IRQ 185
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
divert: allocating divert_blk for eth1
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ip_tables: (C) 2000-2002 Netfilter core team
ohci_hcd 0000:00:0f.2: irq 10, pci mem f882e000
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (CM) [PWRB]
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ip_tables: (C) 2000-2002 Netfilter core team
EXT3 FS on dm-0, internal journal
cdrom: open failed.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
lp: driver loaded but no devices found
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0332e60(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present

zhengxianglun

谢谢大家，上面的dmesg出来的信息

zhengxianglun

硬件是浪潮1U:CPU P42.0*2,2G内存，36G SCSI硬盘一块

hobbyist

好长啊．

nntp

add  noacpi in your /boot/grub/menu.lst (at the end of the running kernel parameter)

zhengxianglun

谢谢你们的回复，我后来看了下，应该关那个ACPI，但是最根本　的好像是这个机器　的主板有BUG，要UPDATE，不然还会和系统起冲突的，或者编译内核。