- 论坛徽章:
- 0
|
FreeBSD安装软盘从哪搞？
Acquire the Boot Floppy Images
The boot disks are available on your installation media in the floppies/ directory, and can also be downloaded from the floppies directory for the i386 architecture and from this floppies directory for the Alpha architecture.
The floppy images have a .flp extension. The floppies/ directory contains a number of different images, and the ones you will need to use depends on the version of FreeBSD you are installing, and in some cases, the hardware you are installing to. In most cases you will just need two files, kern.flp and mfsroot.flp. Additional device drivers may be necessary for some systems. These drivers are provided on the drivers.flp image. Check README.TXT in the same directory for the most up to date information about these floppy images.
Prepare the Floppy Disks
You must prepare one floppy disk per image file you had to download. It is imperative that these disks are free from defects. The easiest way to test this is to format the disks for yourself. Do not trust pre-formatted floppies.
Write the Image Files to the Floppy Disks
The .flp files are not regular files you copy to the disk. Instead, they are images of the complete contents of the disk. This means that you cannot use commands like DOS' copy to write the files. Instead, you must use specific tools to write the images directly to the disk.
If you are creating the floppies on a computer running DOS/Windows, then we provide a tool to do this called fdimage.
If you are using the floppies from the CDROM, and your CDROM is the E: drive, then you would run this:
E:\>; tools\fdimage floppies\kern.flp A:
Repeat this command for each .flp file, replacing the floppy disk each time, being sure to label the disks with the name of the file that you copied to them. Adjust the command line as necessary, depending on where you have placed the .flp files. If you do not have the CDROM, then fdimage can be downloaded from the tools directory on the FreeBSD FTP site. |
|
免费注册
发表于 2003-02-23 02:00
