- 论坛徽章:
- 0
|
Chinese Debian Mini Howto
Version 0.2. Last update: April 14, 2005.
Copyright (c) 2005 Qiming LI (Qiming.Li AT IEEE dot ORG).
Permission is granted to copy, distribute and/or modify this document
under the terms of the
GNU Free Documentation License, Version 1.2
or any later version published by the Free Software Foundation;
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
Texts. A copy of the license is included in the section entitled "GNU
Free Documentation License".
0. Introduction
The purpose of this mini howto is to help users of Debian GNU/Linux to
build a minimum Chinese environment, so that they
can read and input Chinese in their systems.
To support Chinese language display and input under
Debian GNU/Linux, you will need to do the following basic steps.
In the rest of this text, I will explain these steps one by one.
Most of the commands below need to be run
in a terminal with root privilege.
Chinese Debian Mini Howto
Version 0.2. Last update: April 14, 2005.
Copyright (c) 2005 Qiming LI (Qiming.Li AT IEEE dot ORG).
Permission is granted to copy, distribute and/or modify this document
under the terms of the
GNU Free Documentation License, Version 1.2
or any later version published by the Free Software Foundation;
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
Texts. A copy of the license is included in the section entitled "GNU
Free Documentation License".
0. Introduction
The purpose of this mini howto is to help users of Debian GNU/Linux to
build a minimum Chinese environment, so that they
can read and input Chinese in their systems.
To support Chinese language display and input under
Debian GNU/Linux, you will need to do the following basic steps.
In the rest of this text, I will explain these steps one by one.
Most of the commands below need to be run
in a terminal with root privilege.
1. Generating Locales
Run dpkg-reconfigure locales, and choose the following items.
- en_US ISO-8859-1
- zh_CN GB2312
- zh_CN.GBK GBK
- zh_CN.UTF-8 UTF-8
- zh_TW BIG5
- zh_TW.UTF-8 UTF-8
Some of these are optional. For example,
if you are using simplified Chinese only,
you would not need the last two items.
Then it will prompt you for the default locale you want to use.
NOTE: Sometimes you need to reboot to get the new locales working.
To avoid potential problems, it is strongly recommended
that you get this correct from the beginning when you install your system.
2. Installing Chinese Fonts
Install at least the following free fonts.
Each entry below is of the form package_name (font_name).
- ttf-arphic-gbsn00lp (AR PL SungtiL GB)
- ttf-arphic-gkai00mp (AR PL KaitiM GB)
- ttf-arphic-bsmi00lp (AR PL Mingti2L Big5)
- ttf-arphic-bkai00mp (AR PL KaitiM Big5)
The first two are for simplified Chinese, and the other two for traditional Chinese.
These packages can be installed by running
apt-get install ttf-arphic-bkai00mp ttf-arphic-bsmi00lp
ttf-arphic-gbsn00lp ttf-arphic-gbsn00lp
There are other fonts available. You can find them by
searching for "xfonts" using dselect
3. Installing Input Method (IM) Engine(s)
You will need an IM engine to input Chinese characters under X.
There are a few IMs around, including xcin, chinput, scim, etc.
Personally I found scim a good tool.
There are several packages related to scim.
The easiest way to install it is by running
apt-get install scim scim-chinese scim-tables-zh
You can also search for packages beginning with "scim" using dselect
and choose them individually.
After that, create a new file /etc/X11/Xsession.d/95xinput
with the following content.
/usr/bin/scim -d
XMODIFIERS="@im=SCIM"
export XMODIFIERS
This script will be run every time X windows starts.
In case you want to be more flexible, you can put something
more complicated in the file. For example,
case "$LANG" in
zh_TW*)
/usr/bin/scim -d
XMODIFIERS="@im=SCIM"
;;
zh_CN*)
/usr/bin/scim -d
XMODIFIERS="@im=SCIM"
;;
esac
export XMODIFIERS
To use scim, simply press "Control-Space", and
a small window will appear at the lower right corner
of the desktop.
It is advisable that you configure scim (right click on
its icon on the panel, then configure) and remove
the unwanted input methods.
4. Setting Locale
It is highly recommended that you use gdm
or kdm as your X display manager,
because then you will be able to select your language settings
at the login window, which can be different from system default,
and can be different for different login.
If you are using a X display manager that does not support this,
you will have to put an additional line such as
export LANG=zh_CN.gb2312
in /etc/X11/Xsession.d/95xinput.
NOTE: It would not work if you run this after you login.
You will need to restart X for this to work.
REMARK: One "side effect" of this is that once you set
the language to be Chinese, then all the menu become Chinese.
For those who want to keep the English menu but still want
to view/input Chinese, you can set locale to be zh_CN.gb2312,
but change the settings for some environment variables.
For example, I have the following lines in the above file.
ENCODING="en_US"
#export LC_ALL=$ENCODING
export LC_MESSAGES=$ENCODING
#export LC_COLLATE=$ENCODING
#export LC_CTYPE=$ENCODING
export LC_TIME=$ENCODING
export LC_NUMERIC=$ENCODING
#export LC_MONETARY=$ENCODING
#export LC_PAPER=$ENCODING
#export LC_NAME=$ENCODING
export LC_ADDRESS=$ENCODING
export LC_TELEPHONE=$ENCODING
export LC_MEASUREMENT=$ENCODING
export LC_IDENTIFICATION=$ENCODING
Then I got English display of menu, time and date, etc.
You should comment/uncomment these items according
to your needs.
Note that "scim" works fine no matter what
locale you choose.
5. Application Settings
5.1 Web Browsers
For applications such as Mozilla (1.7) and/or other browsers,
usually you do not have to change much.
If a Chinese webpage does not display correctly,
try to check if the character encoding is correct,
and make sure that you have installed the corresponding fonts.
For Mozilla version 1.6, there are some locale packages
such as mozilla-locale-zh-cn or
mozilla-locale-zh-tw.
For Mozilla-Firefox, you will probably need to install one of
the mozilla-firefox-locale-zh-cn or
mozilla-firefox-locale-zh-tw packages.
5.2 Editors
My favorite text editor is VIM with GTK support, or simply gvim.
For gvim to display Chinese characters correctly, just add the following
lines to $HOME/.gvimrc.
set enc=euc-cn
set tenc=euc-cn
set fileencoding=euc-cn
set guifont=AR PL KaitiM GB 12
The last line specifies the font and the font size to use.
You can change it to any of the four fonts as in Section 2 above,
and adjust the font size until you feel comfortable.
Note that even when you set LC_MESSAGE to en_US,
gvim might still display Chinese menu if your locale is set to Chinese.
In this case, you need a bit trick here.
Firstly, you need to create a file with the content something like
the following.
#!/bin/sh
# Start application $1 with English environment
if [ -z "$1" ]; then
echo "Usage: $0 app arg1 arg2 ... "
exit 1
fi
export LANG=en_US
PROG=$1
shift
exec $PROG $*
Let us call this file enstart.sh, and
put the file in a directory that is in your $PATH,
e.g., /usr/local/bin. Make sure that it is executable
by running chmod +x /usr/local/bin/chstart.sh in a terminal.
This small shell script will set $LANG so that the
application it runs would think that it is running in a full English system.
To run gvim, we run enstart.sh gvim instead.
You can add this to your desktop/panel shortcut, or make it an alias.
5.3 Terminal Emulators
RXVT (www.rxvt.org) is a nice terminal-emulator that
intends to replace xterm.
It has a variant rxvt-ml which supports display of
Chinese and Japanese characters.
The gnome-terminal,
the default terminal emulator in the GNOME environment,
supports Chinese by selecting the character encoding
from the terminal menu.
5.4 Display of Chinese File Names in FAT Partitions
You will need kernel support for this.
To be able to mount a FAT (either 16 or 32 bit), you will need
the following module.
fat
vfat
To display Chinese characters properly, you will need at least
one of the following modules:
nls_cp936 (for simplified Chinese)
nls_cp950 (for traditional Chinese)
nls_utf8 (for Unicode characters)
Then in the file /etc/fstab, add another line
like the following
/dev/hda5 /mnt/dos vfat noauto,user,codepage=936,iocharset=cp936 0 0
for simplified Chinese, and replace the number 936 to 950 for traditional Chinese,
and to utf8 for Unicode characters.
NOTE: you should change the partition (/dev/hda5) and mount point (/mnt/dos) to
the partition you want to mount, and the directory you want it to be mounted to, respectively.
5.5 XMMS
Unfortunately, unlike other programs,
my XMMS does not display Chinese file/song names correctly,
even when I set both the system locale and the language option
of gdm to be zh_CN.gb2312, which is quite weird.
My guess is that this has to do with the locale I set when
I first install the system.
Fortunately, similar trick as in the case of gvim can
be applied here, but this time we want to run with Chinese support.
Let us create the following file and call it chstart.sh
#!/bin/sh
# Start application $1 with Chinese environment
if [ -z "$1" ]; then
echo "Usage: $0 app arg1 arg2 ... "
exit 1
fi
export LANG=zh_CN.gb2312
PROG=$1
shift
exec $PROG $*
To run XMMS, just type chstart.sh xmms in a terminal,
or create a shortcut on desktop/panel to do it, or use an alias.
5.6 Instant Messengers
It was actually amazing to find out that popular instant messengers such
as AMSN and Yahoo Messenger do not support Chinese.
It is possible to input Chinese in YM, but difficult to make it displayed
properly.
AMSN simply stops taking any keyboard input when the locale is set to Chinese.
A work-around for AMSN is to use the enstart.sh
to start it instead (but of course you cannot expect to input Chinese with it).
Fortunately, there are instant messengers that do support Chinese.
Skype is an example, but only works when gdm/kdm has the locale set to
zh_CN.gb2312 otherwise it will not work even if you start
it with the chstart.h script above.
GAIM is another cute IM that was reported to work with Chinese.
本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/3156/showart_58876.html |
|
免费注册
发表于 2005-11-26 23:39