免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
1234下一页
最近访问板块 发新帖
查看: 12690 | 回复: 38
打印 上一主题 下一主题

[桌面系统] 电视卡有图象但没声音 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2005-03-20 19:22 |只看该作者 |倒序浏览
OS:   RH9, Kernel 2.6.10
TV卡: Pinnacle PCTV Rave (ChipSet: bt87

tvtime 画面很好就是没声音
(有糙音 - 所以声卡工作正常)

哪位大侠救安一命?

附上 lsmod:

btaudio                17680  1
snd_mixer_oss          19712  0
tvmixer                 5808  0
tvaudio                22420  0
tuner                  22296  0
tda9887                13844  0
bttv                  154720  1
video_buf              22016  1 bttv
firmware_class         10240  1 bttv
i2c_algo_bit           10504  1 bttv
v4l2_common             5888  1 bttv
btcx_risc               4996  1 bttv
i2c_core               25600  6 tvmixer,tvaudio,tuner,tda9887,bttv,i2c_algo_bit
videodev                9728  2 bttv
via82cxxx_audio        29448  1
ac97_codec             18944  1 via82cxxx_audio
snd_bt87x              15112  0
snd_pcm                93184  1 snd_bt87x
snd_timer              24960  1 snd_pcm
snd                    57860  4 snd_mixer_oss,snd_bt87x,snd_pcm,snd_timer
soundcore               9568  6 btaudio,tvmixer,via82cxxx_audio,snd
snd_page_alloc         10244  2 snd_bt87x,snd_pcm
ipv6                  251936  22
lp                     12136  0
autofs                 16000  0
via_rhine              21508  0
fealnx                 17928  0
mii                     5248  2 via_rhine,fealnx
ipt_REJECT              7424  2
iptable_filter          3840  1
ip_tables              18576  2 ipt_REJECT,iptable_filter
ohci1394               34944  0
ieee1394              110608  1 ohci1394
parport_pc             28452  1
parport                37184  2 lp,parport_pc
ide_scsi               16772  0
scsi_mod              128292  1 ide_scsi
ide_cd                 42368  0
cdrom                  41248  1 ide_cd
ehci_hcd               30592  0
usbcore               120264  2 ehci_hcd


附上 lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
00:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
00:0a.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master
IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: S3 Inc. [ProSavageDDR K4M266]

论坛徽章:
0
2 [报告]
发表于 2005-03-20 19:53 |只看该作者

电视卡有图象但没声音

不会是电视卡连声卡的线接错了吧

论坛徽章:
0
3 [报告]
发表于 2005-03-20 19:58 |只看该作者

电视卡有图象但没声音

[quote]原帖由 "zonzi"]不会是电视卡连声卡的线接错了吧[/quote 发表:


卡带来的接线
接到过声卡的 mic 和 line

一样效果: 噪音

zonzi 大侠救命

论坛徽章:
0
4 [报告]
发表于 2005-03-20 20:02 |只看该作者

电视卡有图象但没声音

dmesg 有下面警告. 会不会是原因呢?:

bttv0: i2c: checking for MSP34xx @ 0x80... <7>;i2c_adapter i2c-0: master_recv: reading 1 bytes.
i2c_adapter i2c-0: master_recv: return:-121 (count:1, addr:0x40)
not found
bttv0: i2c: checking for TDA9875 @ 0xb0... <7>;i2c_adapter i2c-0: master_recv: reading 1 bytes.
i2c_adapter i2c-0: master_recv: return:-121 (count:1, addr:0x5
not found
bttv0: i2c: checking for TDA7432 @ 0x8a... <7>;i2c_adapter i2c-0: master_recv: reading 1 bytes.
i2c_adapter i2c-0: master_recv: return:-121 (count:1, addr:0x45)
not found

论坛徽章:
0
5 [报告]
发表于 2005-03-20 20:05 |只看该作者

电视卡有图象但没声音

不会是tvtime里面的参数不是audio line-in吧

论坛徽章:
0
6 [报告]
发表于 2005-03-20 20:08 |只看该作者

电视卡有图象但没声音

[quote]原帖由 "zonzi"]不会是tvtime里面的参数不是audio line-in吧[/quote 发表:


安这就去 - tvtime-configure 一下

论坛徽章:
0
7 [报告]
发表于 2005-03-20 20:10 |只看该作者

电视卡有图象但没声音

usage: tvtime-configure [OPTION]...

  -a, --widescreen           16:9 mode.
  -b, --vbidevice=DEVICE     VBI device (defaults to /dev/vbi0).
  -c, --channel=CHANNEL      Tune to the specified channel on startup.
  -d, --device=DEVICE        video4linux device (defaults to /dev/video0).
  -f, --frequencies=NAME     The frequency table to use for the tuner.
                             (defaults to us-cable).

                             Valid values are:
                                 us-cable
                                 us-cable100
                                 us-broadcast
                                 china-broadcast
                                 japan-cable
                                 japan-broadcast
                                 europe
                                 australia
                                 australia-optus
                                 newzealand
                                 france
                                 russia
                                 custom (first run tvtime-scanner)

  -F, --configfile=FILE      Additional config file to load settings from.
  -h, --help                 Show this help message.
  -g, --geometry=GEOMETRY    Sets the output window size.
  -i, --input=INPUTNUM       video4linux input number (defaults to 0).
  -I, --inputwidth=SAMPLING  Horizontal resolution of input
                             (defaults to 720 pixels).
  -m, --fullscreen           Start tvtime in fullscreen mode.
  -M, --window               Start tvtime in window mode.
  -n, --norm=NORM            The norm to use for the input.  tvtime supports:
                             NTSC, NTSC-JP, SECAM, PAL, PAL-Nc, PAL-M,
                             PAL-N or PAL-60 (defaults to NTSC).
  -R, --priority=PRI         Sets the process priority to run tvtime at.
  -t, --xmltv=FILE           Read XMLTV listings from the given file.
  -l, --xmltvlanguage=LANG   Use XMLTV data in given language, if available.
  -x, --mixer=DEVICE[:CH]    The mixer device and channel to control.
                             (defaults to /dev/mixer:line)

                             Valid channels are:
                                 vol, bass, treble, synth, pcm, speaker, line,
                                 mic, cd, mix, pcm2, rec, igain, ogain, line1,
                                 line2, line3, dig1, dig2, dig3, phin, phout,
                                 video, radio, monitor

论坛徽章:
0
8 [报告]
发表于 2005-03-20 20:12 |只看该作者

电视卡有图象但没声音

好象没法调这个参数

论坛徽章:
0
9 [报告]
发表于 2005-03-20 20:13 |只看该作者

电视卡有图象但没声音

可以用图形界面来调啊

论坛徽章:
0
10 [报告]
发表于 2005-03-20 20:18 |只看该作者

电视卡有图象但没声音

[quote]原帖由 "zonzi"]可以用图形界面来调啊[/quote 发表:


right click ->; input configuration ->;

能看到
Prefered audio mode (mono)
Default to PAL_DK audio decoding (not ticked)
Audio volume boost (choosed FULL)


line-in 没找到啊
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP