- 论坛徽章:
- 0
|
这个时代,有谁会可怜我这个菜菜吗
- [root@localhost root]# adsl-setup
-
- Welcome to the ADSL client setup. First, I will run some checks on
- your system to make sure the PPPoE client is installed properly...
-
-
- LOGIN NAME
-
- Enter your Login Name (default root): //输入ADSL帐号
- INTERFACE
-
- Enter the Ethernet interface connected to the ADSL modem
- For Solaris, this is likely to be something like /dev/hme0.
- For Linux, it will be ethX, where 'X' is a number.
- (default eth0): //网络接口,默认eth0,回车就可以
- Do you want the link to come up on demand, or stay up continuously?
- If you want it to come up on demand, enter the idle time in seconds
- after which the link should be dropped. If you want the link to
- stay up permanently, enter 'no' (two letters, lower-case.)
- NOTE: Demand-activated links do not interact well with dynamic IP
- addresses. You may have some problems with demand-activated links.
- Enter the demand value (default no): yes //是否断线自动重连,是就yes.
- DNS
-
- Please enter the IP address of your ISP's primary DNS server.
- If your ISP claims that 'the server will provide dynamic DNS addresses',
- enter 'server' (all lower-case) here.
- If you just press enter, I will assume you know what you are
- doing and not modify your DNS setup.
- Enter the DNS information here: //输入DNS服务器IP
- PASSWORD
-
- Please enter your Password: //输入两次ADSL帐号密码
- Please re-enter your Password:
-
- USERCTRL
-
- Please enter 'yes' (two letters, lower-case.) if you want to allow
- normal user to start or stop DSL connection (default yes): no //是否允许普通用户对ADSL连接控制
-
- FIREWALLING
-
- Please choose the firewall rules to use. Note that these rules are
- very basic. You are strongly encouraged to use a more sophisticated
- firewall setup; however, these will provide basic security. If you
- are running any servers on your machine, you must choose 'NONE' and
- set up firewalling yourself. Otherwise, the firewall rules will deny
- access to all standard servers like Web, e-mail, ftp, etc. If you
- are using SSH, the rules will block outgoing SSH connections which
- allocate a privileged source port.
-
- The firewall choices are:
- 0 - NONE: This script will not set any firewall rules. You are responsible
- for ensuring the security of your machine. You are STRONGLY
- recommended to use some kind of firewall rules.
- 1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
- 2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
- for a LAN
- Choose a type of firewall (0-2): 0 //选0,自己管理防火墙
- Start this connection at boot time
-
- Do you want to start this connection at boot time?
- Please enter no or yes (default no):yes //开机自动连接
-
- 再按 y 确认配置就可以了.
复制代码
OK. |
|