- 论坛徽章:
- 0
|
机型：HP LH4，SCSI A，SCSI B，SCSI A上两个磁盘阵列，
现在SCSI B上增加一个5G的硬盘，SCSI B上已有一个磁带机。
报这条错是什么意思，怎么处理？：
idmkreg: error updating space.c file for Sdsk
idmkreg: error updating space.c file for Sdsk
# mkdev .scsi
SCSI Device Configuration
1. Add a SCSI device
2. Remove a SCSI device
3. Display current SCSI configuration
4. Display SCSI help message
Select an option or enter q to quit: 3
The configuration file currently has entries for the following devices:
Host
Adapter Adapter
Type Device Number ID LUN Bus
-------------------------------------------
wd cd-rom 0 0 0 0
amird disk 0 0 0 0
slha tape 0 2 0 0
Press any key to continue:
SCSI Device Configuration
1. Add a SCSI device
2. Remove a SCSI device
3. Display current SCSI configuration
4. Display SCSI help message
Select an option or enter q to quit: 1
What type of device do you want to add?
1. Hard Disk
2. Tape
3. CD-ROM
4. Floptical
5. Juke Box
Select an option or enter q to quit: 1
Enter the prefix of the SCSI host adapter that supports this device
or press <Return>; for the default: 'amird'
Enter h for a list of host adapters or enter q to quit: hf
Which 'hf' SCSI host adapter supports this device?
Select 0-3, or enter q to quit: 0
The Host Adapter parameters will be automatically configured
What SCSI Bus is this device attached to?
Press <Return>; to use the default:0
Select 0-n, or h for help, or q to quit: 0
What is the Target ID for this device?
Select 0-15, or h for help, or q to quit: 4
What is the LUN of this device?
Press <Return>; to use the default: 0
Select 0-7, or h for help, or q to quit: 0
You are about to add the following device:
Host
Adapter Adapter
Type Device Number ID LUN BUS
----------------------------------------------
hf Sdsk 0 4 0 0
Update configuration? (y/n) y
The configuration file has been updated.
A new kernel must be built, to reflect the changes
to the SCSI configuration. Do you want to do this now? (y/n) y
The UNIX Operating System will now be rebuilt.
This will take a few minutes. Please wait.
Root for this system build is /
LINE: SEMMAP 8192
WARNING: The value of parameter 'SEMMAP', 8192, should be within (10, 100)
LINE: SEMMNI 8192
WARNING: The value of parameter 'SEMMNI', 8192, should be within (10, 300)
LINE: NSPTTYS 128
idmkreg: error updating space.c file for Sdsk
idmkreg: error updating space.c file for Sdsk
The UNIX Kernel has been rebuilt.
Do you want this kernel to boot by default? (y/n) |
|
免费注册
发表于 2003-12-14 17:01
发表于 2003-12-15 10:27