proftpd::proftpd dead but subsys locked

ifoolyou

RT!!
请问这代表什么意思!??!??
我的PROFTP已经不好用了!

好好先生

检查你的配置文件。我见过vsftpd这样的提示都是因为配置文件有问题。

ifoolyou

[quote]原帖由 "好好先生"]检查你的配置文件。我见过vsftpd这样的提示都是因为配置文件有问题。[/quote 发表：


我的配置文件如下::
# This is a basic ProFTPD configuration file (rename it to
# 'proftpd.conf' for actual use.  It establishes a single server
# and a single anonymous login.  It assumes that you have a user/group
# "nobody" and "ftp" for normal operation and anon.

ServerName                      "roFTPD Default Installation"
ServerType                      standalone
DefaultServer                   on

# Port 21 is the standard FTP port.
Port                            21
# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask                           022

# If you don't want normal users logging in at all, uncomment this
# next section
#<Limit LOGIN>;
#  DenyAll
#</Limit>;

# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances                    30

# Set the maximum number of seconds a data connection is allowed
# to "stall" before being aborted.
TimeoutStalled                  300

# Set the user and group that the server normally runs at.
User                            nobody
Group                           nobody

# The PersistentPasswd directive controls how proftpd handles authentication
# Note: NIS or NIS+ users will most likely want to disable this feature,
# regardless of proftpd's detected configuration defaults.
# Failure to disable this will make your NIS/NIS+ maps not work!
PersistentPasswd off

# The ExtendedLog directive allows customizable logfiles to be generated,
# either globally or per VirtualHost. The filename argument must contain
# an absolute pathname to a logfile which will be appended to when proftpd starts.
# Multiple logfiles (potentially with different command classes and formats) can be
# created.
ExtendedLog /var/log/proftpd.log

# Normally, we want files to be overwriteable.
<Directory /*>;
  AllowOverwrite                on
</Directory>;

# A basic anonymous configuration, no upload directories.
<Anonymous ~ftp>;
  User                          ftp
  Group                         ftp

  # We want clients to be able to login with "anonymous" as well as "ftp"
  UserAlias                     anonymous ftp

  # If you want to provide anonymous ftp service, please
  # uncomment following line - "RequireValidShell off".

  #RequireValidShell           off

  # Limit the maximum number of anonymous logins
  MaxClients                    10 "Sorry, max %m users -- try again later"

  # We want 'welcome.msg' displayed at login, and '.message' displayed
  # in each newly chdired directory.
  DisplayLogin                  welcome.msg
  DisplayFirstChdir             .message

  # Limit WRITE everywhere in the anonymous chroot
  <Limit WRITE>;
    DenyAll
  </Limit>;

  # Uncomment this next section for enable upload directory that allows -
  # storing files but not retrieving or creating directories.
  #<Directory incoming/*>;
  #  <Limit READ>;
  #    DenyAll
  #  </Limit>;
  #
  #  <Limit STOR>;
  #    AllowAll
  #  </Limit>;
  #</Directory>;

</Anonymous>;

并且系统中没有服务在使用PORT::21!!!
谁能帮我看看着是什么问题么?!
还有下面一些信息!!
[root@TurboLinux8 xinetd.d]# proftpd start
TurboLinux8 - Fatal: unable to determine IP address of `TurboLinux8'.

ifoolyou

我已经找到原因了!!!
原来有人把HOSTNAME给改了,但是在文件/etc/hosts里127.0.0.1               localhost.localdomain localhost
没有变, 将localhost该为现在的TurboLinux8就可以把然后从新启动服务,  搞顶了!!