昨天编译内核出错，请帮忙(内详)

linuxs

用的是内核版本为2.5.74，先是make xconfig，配置好.config。make dep，提示说没有必要，make bzImage，成功生成bzlinuz(可能拼错了，记不得了)。make modules时出错，信息如下

[root@hjchlmh linux]# make modules
make[1]: `arch/i386/kernel/asm-offsets.s' is up to date.
  CC [M]  drivers/char/riscom8.o
In file included from drivers/char/riscom8.c:51:
drivers/char/riscom8.h:84: field `tqueue' has incomplete type
drivers/char/riscom8.h:85: field `tqueue_hangup' has incomplete type
drivers/char/riscom8.c:84: warning: type defaults to `int' in declaration of `DECLARE_TASK_QUEUE'
drivers/char/riscom8.c:84: warning: parameter names (without types) in function declaration
drivers/char/riscom8.c:135: confused by earlier errors, bailing out
make[2]: *** [drivers/char/riscom8.o] Error 1
make[1]: *** [drivers/char] Error 2
make: *** [drivers] Error 2

linuxs

没人回？不会吧

bearzhang

没错，还有先运行make dep检查文件的完整性．

linuxs

[quote]原帖由 "landwater"]最好先运行一下make mrproper[/quote 发表：
     

这是做什么用的？还是第一次见

sqh

if it is problem with modules please upgrade your module-utils, see also:
http://www.chinaunix.net/forum/viewtopic.php?t=108395
But I think it is because of the riscom, I run into this error every time I  select riscom

linuxs

sqh，tks，reading

gzbryan

我这两天也在编译内核，也是很多问题，有谁能介绍下经验

linuxs

等下星期2.6出来吧

chr911

这个版本是问题多多！
我也是碰到的问题多如牛毛！
等一个稳定的版本出来了就好了，我编译其它版本的内核都很顺利！