请问关于归档恢复脚步在VTL中恢复归档的问题~！

wanenjie

公司是用NETWORKER+EMC CX380的vtl·！通过RMAN脚本来恢复DBF就好正常，但是恢复归档的时候，如果不连接恢复目录，就提示我找不到合适的备份集，如果连接了恢复命令~！在下面的那个界面等你3个小时都没有反应，是不是我的脚步写错呢？请大家帮忙看看~！谢谢~

RMAN> connect catalog aaa/bbb@rman;

connected to recovery catalog database

RMAN> run{
2> allocate channel d1 type 'sbt_tape';
3> send 'nsr_env=(nsr_server=bakserver,nsr_data_volume_pool=t1220,nsr_client=baedserver)';
4> restore archivelog all;
5> release channel d1;}

allocated channel: d1
channel d1: sid=19 devtype=SBT_TAPE
channel d1: NMO v4.2.0.0

sent command to channel: d1

Starting restore at 26-MAY-11

赵大少爷

RMAN> list backup of archivelog all;

run {
allocate channel t1 type 'sbt_tape' ;
send 'nsr_env=(nsr_server=bakserver,nsr_data_volume_pool=t1220,nsr_client=baedserver)';
set archivelog destination to '/arch';
restore archivelog sequence 1438 thread 1;
restore archivelog sequence 1439 thread 1;
restore archivelog sequence 1440 thread 1;
restore archivelog sequence 1441 thread 1;
release channel t1;}

wanenjie

不行啊·！提示没有找到对应的备份集·！但是我明明备份过得喔·！

wanenjie

RMAN> run{
2> allocate channel d1 type 'sbt_tape';
3> send 'nsr_env=(nsr_server=bakserver,nsr_data_volume_pool=t5220,nsr_client=crmserver)';
4> set archivelog destination to '/sandata/oradata/sehq/archive';
5> restore archivelog sequence 60480 thread 1;
6> release channel d1;}

allocated channel: d1
channel d1: sid=17 devtype=SBT_TAPE
channel d1: NMO v4.2.0.0

sent command to channel: d1

executing command: SET ARCHIVELOG DESTINATION

Starting restore at 27-MAY-11

released channel: d1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/27/2011 17:36:36
RMAN-06026: some targets not found - aborting restore
RMAN-06025: no backup of log thread 1 seq 60480 scn 8212106636549 found to restore

100心

建立个测试环境，然后归档恢复本机，看能不能正常读。

alongx

NMO v4.2.0.0  4.2的模块？？？

wolfheader

公司是用NETWORKER+EMC CX380的vtl·！通过RMAN脚本来恢复DBF就好正常，但是恢复归档的时候，如果不连接恢复 ...
wanenjie 发表于 2011-05-26 23:47

    脚本没问题，你再描述一下环境和现象吧。3个小时没反应，那3个小时以后有反应了没有？

连接target语句呢？回复数据文件是怎么做的？

100心

NMO v4.2.0.0  4.2的模块？？？
alongx 发表于 2011-05-31 20:58

    4.2很正常，现有环境中很多用户还是用4.2 搭配9的。
问题已解决，lz不来分享经验，扣他分。{:3_189:}