求教CA 的问题

XFIVE

我们有个仓库DDN 连公司，我去的时候是好的，现在有个ERROR 我没法去那里
谁知道这是那里出问题了，多谢了？？？
PC5250 License Error: CWBCO1003-Winsock error, function returned 10051, 10.63.93.20

XFIVE

HP 的人搞了NETWORK。

pcas400

这问题我遇到过，检查DDN线路。

qingzhou

仓库PC端的IP地址是“10.63.93.20 ”吗？
在公司的任一PC上的DOS下执行：TRACERT 10.63.93.20，看看哪段线路出问题了？

jj8610

CA version and Windows OS vision?

Apply all the latest CA servoce pack and give the user a power user
autority.

XFIVE

CWBCO1003  [Back to top]
Cause
An error occurred during communications. The name of the function that failed, if available, and its error code are specified.
Recovery
Check the list below for the error code specified in the message and take the action specified. If the function and/or error code in the message are not listed here, they may be listed in Informational APAR II10598 along with cause and recovery information.
Error codes (for all functions)
8405 - The connection was initially established, but was disconnected by the server application before communications were completed. See message CWBCO1047 for additional information.
8411 - The connection attempt did not complete before the user configured timeout expired. The timeout can occur while querying the IP address or making the initial connection attempt to the server. See Server Connection Properties for information on configuring the connection to the server. See message CWBCO1051 for additional information.
8413 - A user configurable time-out occurred during a send or receive attempt. See message CWBCO1054.
11001, 11002, 11003 - The server name was not found during TCP/IP address lookup. Verify the server name entered is correct. Verify the TCP/IP settings are correct for resolving addresses. See message CWBCO1004 for additional help. See Server Connection Properties for information on changing the IP address and mode.
11004 - The iSeries service name was not found in the local SERVICES file. Verify the required iSeries service names are correctly entered in the local SERVICES file.
Port numbers for host servers and server mapper:
Service Name         Description        Port Number         Subsystem        Daemon        Server
as-central        Central server         8470        QSYSWRK        QZSCSRVSD        QZDASOINIT and QZSCSRVS
as-database        Database server         8471        QSERVER        QZDASRVSD        QZDASOINIT and QTFPJTCP
as-dtaq        Data queue server         8472        QSYSWRK        QZHQSRVD        QZHQSSRV
as-file        File server         8473        QSERVER        QPWFSERVSD        QNPSERVS and QIWVPPJT
as-netprt        Network print server         8474        QSYSWRK        QNPSERVD        QNPSERVS and QIWVPPJT
as-rmtcmd        Remote command / Program call server         8475        QSYSWRK        QZRCSRVSD        QZRCSRVS
as-signon        Signon server         8476        QSYSWRK        QZSOSGND        QZSOSIGN
as-svrmap        Server mapper         449        QSYSWRK        QZSOSMAPD        n/a
drda        DDM        446        QSYSWRK        QRWTLSTN        QRWTSRVR
as-usf        Ultimedia Facilities         8480        QSYSWRK        QUMBDMN        QUMBPJTC
as-admin-http        HTTP Administration         2001        QHTTPSVR        n/a        all within QHTTPSVR subsystem
as-mtgtctrl        Management Central         5555        QSYSWRK        n/a        QYPSSRV
telnet        Telnet server         23        QSYSWRK        n/a        QTVTELNET and QTVDEVICE
See Server Connection Properties for information on changing the port mode.
10014, 10022 - The TCP/IP provider has detected an invalid argument. This can happen when the connection terminates and invalidates its resources before notifying the calling application. Try re-connecting to the server, then try the action again.
10050, 10051 - The network is down or unreachable. Check your local and remote network settings.
10048 - The local socket address and port are already in use. Restart the application and try again.
10050, 10051, 10064, 10065 - No route to the server was found. Check your TCP/IP address and configuration. There may also be a network problem.
10052 - The server you were connected to somehow lost the knowledge of the connection, possibly due to a network failure or a "keep-alive" activity timeout. Try re-connecting to the server, then try the action again.
10053 - The connection was established, but was broken by the client TCP/IP communications provider. Try re-connecting to the server, then try the action again.
10054 - See 8405 above.
10055, 10067 - The TCP/IP provider has run out of resources to process your request. Your PC system may be too low on available memory, or you may have too many programs that use TCP/IP running. End any unnecessary programs and try the action again. If this error still occurs, shutdown and re-start your pc, and try the action again with as few other programs active as possible.
10057, 10058 - A request to send or receive failed because the socket had already been closed.
10060, 10064 - The address used for the server was found, but the connection to the server timed out. See CWBCO1048 for additional information.
10061 - The server was contacted, but refused the connection request. See CWBCO1049 for additional information.
10107 - The TCP/IP provider received a failure from an operating system call that should never fail. Check to make sure you have the latest operating system service pack installed.
Any other
Ask your systems administrator to verify that the host servers are running on the iSeries server, and look for messages logged on the server that might indicate a network or other problem. If there are routers in the network between your personal computer and the server, the problem may be related to router configuration or operation. Check for general network problems.


我查了IBM 网站应该是DDN 或 CONNECTION 的问题， HP 的人正在查。。