- 论坛徽章:
- 0
|
使用root登陆后，收到系统发的一封邮件，看不明白，请指教一下阿：类似内容的邮件很多。
From root@lychp1 Mon Feb 17 11:41:37 EAT 2003
Received: (from root@localhost) by lychp1. (8.8.6 (PHNE_17190)/8.7.1) id LAA26071; Mon, 17 Feb 2003 11:41:36 +0800 (EAT)
Date: Mon, 17 Feb 2003 11:41:36 +0800 (EAT)
Message-Id: <200302170341.LAA26071@lychp1.>;
To: root@lychp1
From: root@LYCMAIN1
Subject: LYCMAIN1: Event Monitor Notification
Content-Length: 3828
Status: RO
>;------------ Event Monitoring Service Event Notification ------------<
Notification Time: Mon Feb 17 11:41:36 2003
LYCMAIN1 sent Event Monitor notification information:
/storage/events/tapes/SCSI_tape/0_0_1_0.3.0 is >;= 3.
Its current value is CRITICAL(5).
Event data from monitor:
Event Time..........: Mon Feb 17 11:41:36 2003
Severity............: CRITICAL
Monitor.............: dm_stape
Event #.............: 5000
System..............: LYCMAIN1
Summary:
Unknown device at hardware path 0/0/1/0.3.0 : I/O Failure.
Description of Error:
Monitor cannot communicate with this device. The device is not in a state
where it can process requests.
Probable Cause / Recommended Action:
The device may be in a trasitional state and cannot respond. Wait a few
seconds and retry the operation.
The device may be offline. Bring the device back on-line.
The device may be powered-off. Power it back on.
Alternatively, one or both of the terminators on the SCSI bus may be
missing. Install the terminators in their proper locations at the ends of
the SCSI bus.
Alternatively, the SCSI cable may have become detached from the device.
Re-attach the cable.
Alternatively, the device may be in a state where it could not process
this, or any, request. Cycle power to the device.
Alternatively, there could be more than one device having the same address
on the SCSI bus. Make all the addresses on the SCSI bus unique.
Alternatively, the total length of all cable segments on the SCSI bus
exceeds 25 meters. Replace one or more cable segments until the total
length is less than this value.
Alternatively, the SCSI cable may have failed. Replace it.
Alternatively, if all of the above fail to correct the problem, the device
has experienced a hardware failure. Repair or replace it, as necessary.
Alternatively, if messages corresponding to this condition appear in the
log for more than one device on the SCSI bus, the device adapter may be in
a state from which it cannot extract itself. Perform a system shutdown,
cycle power to the computer and wait for it to reboot.
If, after reboot, messages corresponding to this condition continue to
appear in the log for this SCSI bus, replace the device adapter.
Additional Event Data:
System IP Address...: 10.110.67.234
System IP Address...: 10.10.14.200
Event Id............: 0x003e5059f000000000
Monitor Version.....: B.01.00
Event Class.........: I/O
Client Configuration File...........:
/var/stm/config/tools/monitor/default_dm_stape.clcfg
Client Configuration File Version...: A.01.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
None
Additional System Data:
System Model Number.............: 9000/800/L1000-44
OS Version......................: B.11.00
System Firmware Version.........: 40.26
System Serial Number............: USS403101M
System Software ID..............: 500706557
EMS Version.....................: A.03.20
STM Version.....................: A.21.00
System Current Product Number...:
System Original Product Number..: A5576A
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/dm_stape.htm#5000
v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v
Component Data:
Physical Device Path....: 0/0/1/0.3.0
Inquiry Vendor ID.......: HP
Inquiry Product ID......: C1537A
Firmware Version........: V032
>;---------- End Event Monitoring Service Event Notification ----------< |
|
免费注册
发表于 2003-03-05 08:10
