OpenBSD中作DHCP client时的问题

弱智

如题，purge今天碰到问题：
在一台双网卡pc上面设置NAT；
安装到网卡设置，外网网卡是dhcp client，
系统也能自动侦测出DHCP 服务器是10.0.0.2，
但是迟迟不能分配到地址，（在linux和winxp都可以分配到10.3.5.x）
出现"Invalid lease option"，
然后结束。

也找了google和 bsdforums.org上面的一些，不太明白。
望指教，谢谢。

弱智

补充一下，purge在自己的家里用的DSL Modem；带路由，同样的设置可以很好地从DSL Modem里面的dhcp server获得C类ip地址。

dennis2

你的 /etc/dhclient.conf ?

弱智

$cat /etc/dhclient.conf
send dhcp-lease-time 7200

dennis2

后面少了 ';' ?

弱智

谢谢楼上兄台的回复，只有明天再看看是否为这个原因了。
如果不是，可能还有什么原因呢？

peter333

Hi, my friend,
How's going? Your are our boss and the master of BSD. I don't think there is a problem you can't fix it. By the way, which BSD you use ? I mean Openbsd or Freebsd? I can try on my Openbsd machine if you use Openbsd. Good luck.

Best

peter

peter333

How did you setup your DNS and default gateway? can you ping your default gateway or something like "www.yahoo.com"?

弱智

hi there, i'm still a newbie in *nix, includes the OBSD.

and when i ping any site excepts the ip in LAN,
it prompts me the "no route ....." and so on.

thanx.

kinux

原帖由 "弱智" 发表：
hi there, i'm still a newbie in *nix, includes the OBSD.

and when i ping any site excepts the ip in LAN,
it prompts me the "no route ....." and so on.

thanx.

看了吧..
http://www.openbsd.org/faq/faq6.html#Intro