- 论坛徽章:
- 0
|
我装了lei3.0,准备通过lei让domino和oracle进行数据交换,但在400上一运行lei后,asp的占用率就不断上升,而且lei的服务也停不下来,只有把400重新起下,asp才稳定下来,通过dspmsg,可以看到在系统信息里有很多的 Job message queue for 006100/QNOTES/LEIENGAI has been wrapped. 详细信息如下:
Message ID . . . . . . : CPI2417 Severity . . . . . . . : 40
Message type . . . . . : Information
Date sent . . . . . . : 04/23/04 Time sent . . . . . . : 11:28:32
Message . . . . : Job message queue for 006100/QNOTES/LEIENGAI has been
wrapped.
Cause . . . . . : The size of the job message queue for
006100/QNOTES/LEIENGAI reached the maximum size. The maximum size is
defined in the JOBMSGQMX value of the job description used by the job. When
the job message queue becomes full, the job attribute, JOBMSGQFL, identifies
the action to take. In this case, the job attribute value of *PRTWRAP
allowed the job message queue to be wrapped.
Recovery . . . : If this message appears frequently you may want to look at
the messages in the job message queue to determine if there is a problem
with the job. You can do this by using the Display Job Log (DSPJOBLOG)
command and specifying 006100/QNOTES/LEIENGAI for the JOB parameter. If there is no problem, you may want to specify a larger maximum size for a job
message queue. To do this specify the JOBMSGQMX parameter on the following
commands: Create job description (CRTJOBD) command, change job description
(CHGJOBD) command, submit job (SBMJOB) command, or batch job (//BCHJOB)
command. If the JOBMSGQMX parameter is not specified on those commands, the
value to use for the job is taken from the QJOBMSGQMX system value.
是什么问题导致这些信息队列不能释放阿 |
|