大虾们跪求贴一个你们的configfile设置，我是不是真得很菜

# PearPC Configuration File

#
# Resolution
#
# 0: 640x480x8 (indexed)
# 1: 640x480x15
# 2: 640x480x32
# 3: 800x600x8 (indexed)
# 4: 800x600x15
# 5: 800x600x32
# 6: 1024x768x8 (indexed)
# 7: 1024x768x15
# 8: 1024x768x32
#
# The indexed modes are unsupported.
#
# default: 4
ppc_start_resolution = 4

#
# Redraw interval (in ms)
# must be between 1 and 999
#
# If you set this higher, PearPC will spend less time doing redraws (and so run faster)
# but feel less responsive. You should adjust this to your computer speed and personal
# preference.
#
redraw_interval_msec = 999

#
# Loader
#

#
# Boot method
#    this can be
#    1. "auto", prom will boot the first bootable partition found (default)
#    2. "select", prom will show you a list of bootable partitions
#    3. "force", prom will load and boot the local file prom_loadfile
#
prom_bootmethod = "auto"

# Example of how to use "force":
#prom_bootmethod = "force"
#prom_loadfile = "test/yaboot"
#prom_env_bootpath = "disk"

#
# bootargs: don't change unless you know what you are doing
# machargs: set to "-v" to get a verbose startup
#

#prom_env_bootargs = ""
prom_env_machargs = "-v"

#
# This is needed if you want to boot Mac OS X
#

prom_driver_graphic = "video.x"

# This will adjust the position of the initial page table (don't change)
#page_table_pa = 104857600

#
# CPU Config
#
# Processor Version Register
# Defaults to 0x00088302
# Only change if you know want you are doing
#
#cpu_pvr = 0x00088302

#
#Main memory (default 256 MiB)
#must be >;= 256 MiB
#
memory_size=0x10000000

#
# IO Devices
#

#
# PCI IDE Config
#
# Drive type will be set according to file extension:
# .img: Harddisk (filesize must be multiple of 516096)
# .iso: CD-Rom
# Or you can override this by specifying the type via
# pci_ide0_master_type / pci_ide0_slave_type

pci_ide0_master_installed = 0
pci_ide0_master_image = "mac.img"
#pci_ide0_master_type = "hd"

pci_ide0_slave_installed = 1
pci_ide0_slave_image = "e:\ppc\Mac.OSX.V10.3.Phanter.Disc1.ISO"
#pci_ide0_slave_image = "/home/sepp/prog/pearpc.res/test/isos/MandrakeLinux-9.1-CD1.ppc.iso"
#pci_ide0_slave_image = "/dev/cdrom"
pci_ide0_slave_type = "cdrom"

#
# Network (unavailable on windows)
#
pci_3c90x_installed = 0
pci_3c90x_mac = "de:ad:ca:fe:12:34"

#
# USB
#
pci_usb_installed = 1

#
# NVRAM
#
nvram_file = "nvram"