免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 1042 | 回复: 1
打印 上一主题 下一主题

2503怎么升级啊 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2004-05-25 11:26 |只看该作者 |倒序浏览
请教各位大虾
我的2503版本信息如下:这样的机器能不能升级啊?我要升级成什么版本才

支持nat啊?怎么下载适合她用的版本啊?
----------------------------------------------------------------
Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-I-L), Version 11.0(16), RELEASE

SOFTWARE (fc1)
Copyright (c) 1986-1997 by cisco Systems, Inc.
Compiled Tue 24-Jun-97 12:20 by jaturner
Image text-base: 0x0301E644, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
ROM: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),

RELEASE SOFTWARE (
fc1)

yqltlan uptime is 3 minutes
System restarted by power-on
System image file is "flash:/igs-i-l.110-16", booted via flash

cisco 2500 (68030) processor (revision N) with 2048K/2048K bytes

of memory.
Processor board ID 11158075, with hardware revision 00000001
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
Basic Rate ISDN software, Version 1.0.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
1 ISDN Basic Rate interface.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

论坛徽章:
0
2 [报告]
发表于 2004-05-25 14:39 |只看该作者

2503怎么升级啊

升级到12.0,但是你的路由器应该升级内存了。
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP