- 论坛徽章:
- 0
|
oninit -v
Checking group membership to determine server run modesucceeded
Reading configuration file '/usr/informix/etc/onconfig.ccbgd'...succeeded
Creating /INFORMIXTMP/.infxdirs ... succeeded
Creating infos file "/usr/informix/etc/.infos.ccbgd" ... "/usr/informix/etc/.con
f.ccbgd" ... succeeded
Writing to infos file ... succeeded
Checking config parameters...succeeded
Allocating and attaching to shared memory...succeeded
Creating resident pool 4038 kbytes...succeeded
Creating buffer pool 12002 kbytes...succeeded
Initializing rhead structure...succeeded
Initializing ASF ...succeeded
Initializing Dictionary Cache and Stored Procedure Cache...succeeded
Bringing up ADM VP...succeeded
Creating VP classes...succeeded
Onlining 0 additional cpu vps...succeeded
Onlining 2 IO vps...succeeded
Forking main_loop thread...succeeded
Initialzing DR structures...succeeded
Forking 1 'ipcshm' listener threads...succeeded
Forking 1 'tlitcp' listener threads...$
---------------------------------------------------------
online.log
09:05:49 Requested shared memory segment size rounded from 8000KB to 8192KB
Sat Jun 5 09:05:50 2004
09:05:50 Event alarms enabled. ALARMPROG = '/usr/informix/etc/log_full.sh'
09:05:55 DR: DRAUTO is 0 (Off)
09:05:55 Requested shared memory segment size rounded from 588KB to 4096KB
09:05:55 (7) not superuser and /usr/informix/lib/netdev is not available
09:05:55 Assert Failed: tlipoll.c, line 2015, thread 9, errno=2, makestream err
or.
09:05:55 Informix Dynamic Server Version 7.31.UC5
09:05:55 Who: Session(3, informix@, 0, 0)
Thread(9, tlitcppoll, 0, 
File: neterrb.c Line: 658
09:05:55 listener-thread: err = -27100: oserr = 9: errstr = : Internal Communic
ations Error: NSF subsystem error.
System error = 9.
09:05:55 Attempting to bring listener thread down.
09:05:55 Server stopped.
-----------------------------------------------------------------------------
将onconfig文件里面的DBSERVERALIASES db1_ali 去掉就可以启动了
onconfig文件是这样的：
# Root Dbspace Configuration
ROOTNAME rootdbs # Root dbspace name
ROOTPATH /usr/informix/dbs/rootdbs
# Path for device containing root dbspace
ROOTOFFSET 0 # Offset of root dbspace into device (Kbytes)
ROOTSIZE 102400 # Size of root dbspace (Kbytes)
# Disk Mirroring Configuration Parameters
MIRROR 1 # Mirroring flag (Yes = 1, No = 0)
MIRRORPATH # Path for device containing mirrored root
MIRROROFFSET 0 # Offset into mirrored device (Kbytes)
# Physical Log Configuration
PHYSDBS rootdbs # Location (dbspace) of physical log
PHYSFILE 10240 # Physical log file size (Kbytes)
# Logical Log Configuration
LOGFILES 3 # Number of logical log files
LOGSIZE 10240 # Logical log size (Kbytes)
# Diagnostics
MSGPATH /usr/informix/online.log # System message log file path
CONSOLE /dev/console # System console message path
ALARMPROGRAM /usr/informix/etc/log_full.sh # Alarm program path
SYSALARMPROGRAM /usr/informix/etc/evidence.sh # System Alarm program path
TBLSPACE_STATS 1
# System Archive Tape Device
TAPEDEV /dev/null # Tape device path
TAPEBLK 16 # Tape block size (Kbytes)
TAPESIZE 10240 # Maximum amount of data to put on tape (Kbytes)
# Log Archive Tape Device
LTAPEDEV /dev/null # Log tape device path
LTAPEBLK 16 # Log tape block size (Kbytes)
LTAPESIZE 10240 # Max amount of data to put on log tape (Kbytes)
# Optical
STAGEBLOB # Informix Dynamic Server/Optical staging area
# System Configuration
SERVERNUM 1 # Unique id corresponding to a Dynamic Server instance
DBSERVERNAME db1 # Name of default database server
注意：下面这一句删掉就可以启动了
DBSERVERALIASES db1_ali # List of alternate dbservernames
NETTYPE ipcshm,1,50,CPU # Configure poll thread(s) for nettype
DEADLOCK_TIMEOUT 60 # Max time to wait of lock in distributed env.
RESIDENT 0 # Forced residency flag (Yes = 1, No = 0)
MULTIPROCESSOR 0 # 0 for single-processor, 1 for multi-processor
NUMCPUVPS 1 # Number of user (cpu) vps
SINGLE_CPU_VP 0 # If non-zero, limit number of cpu vps to one
NOAGE 0 # Process aging
AFF_SPROC 0 # Affinity start processor
AFF_NPROCS 0 # Affinity number of processors
# Shared Memory Parameters
LOCKS 50000 # Maximum number of locks
BUFFERS 6000 # Maximum number of shared buffers
NUMAIOVPS # Number of IO vps
PHYSBUFF 64 # Physical log buffer size (Kbytes)
LOGBUFF 64 # Logical log buffer size (Kbytes)
LOGSMAX 12 # Maximum number of logical log files
CLEANERS 1 # Number of buffer cleaner processes
SHMBASE 0x10000000 # Shared memory base address
SHMVIRTSIZE 8000 # initial virtual shared memory segment size
SHMADD 8192 # Size of new shared memory segments (Kbytes)
SHMTOTAL 0 # Total shared memory (Kbytes). 0=>;unlimited
CKPTINTVL 300 # Check point interval (in sec)
LRUS 8 # Number of LRU queues
LRU_MAX_DIRTY 60 # LRU percent dirty begin cleaning limit
LRU_MIN_DIRTY 50 # LRU percent dirty end cleaning limit
LTXHWM 50 # Long transaction high water mark percentage
LTXEHWM 60 # Long transaction high water mark (exclusive)
TXTIMEOUT 0x12c # Transaction timeout (in sec)
STACKSIZE 32 # Stack size (Kbytes)
# System Page Size
# BUFFSIZE - Dynamic Server no longer supports this configuration parameter.
# To determine the page size used by Dynamic Server on your platform
# see the last line of output from the command, 'onstat -b'.
# Recovery Variables
# OFF_RECVRY_THREADS:
# Number of parallel worker threads during fast recovery or an offline restore.
# ON_RECVRY_THREADS:
# Number of parallel worker threads during an online restore.
OFF_RECVRY_THREADS 10 # Default number of offline worker threads
ON_RECVRY_THREADS 1 # Default number of online worker threads
# Data Replication Variables
# DRAUTO: 0 manual, 1 retain type, 2 reverse type
DRAUTO 0 # DR automatic switchover
DRINTERVAL 30 # DR max time between DR buffer flushes (in sec)
DRTIMEOUT 30 # DR network timeout (in sec)
DRLOSTFOUND /usr/informix/etc/dr.lostfound # DR lost+found file path
# CDR Variables
CDR_LOGBUFFERS 2048 # size of log reading buffer pool (Kbytes)
CDR_EVALTHREADS 1,2 # evaluator threads (per-cpu-vp,additional)
CDR_DSLOCKWAIT 5 # DS lockwait timeout (seconds)
CDR_QUEUEMEM 4096 # Maximum amount of memory for any CDR queue (Kbytes)
CDR_LOGDELTA 30 # % of log space allowed in queue memory
CDR_NUMCONNECT 16 # Expected connections per server
CDR_NIFRETRY 300 # Connection retry (seconds)
CDR_NIFCOMPRESS 0 # Link level compression (-1 never, 0 none, 9 max)
# Backup/Restore variables
BAR_ACT_LOG /tmp/bar_act.log
BAR_MAX_BACKUP 0
BAR_RETRY 1
BAR_NB_XPORT_COUNT 10
BAR_XFER_BUF_SIZE 31
# Informix Storage Manager variables
ISM_DATA_POOL ISMData # If the data pool name is changed, be sure to
# update $/usr/informix/bin/onbar. Change to
# ism_catalog -create_bootstrap -pool <new name>;
ISM_LOG_POOL ISMLogs
# Read Ahead Variables
RA_PAGES # Number of pages to attempt to read ahead
RA_THRESHOLD # Number of pages left before next group
# DBSPACETEMP:
# Dynamic Server equivalent of DBTEMP for SE. This is the list of dbspaces
# that the Dynamic Server SQL Engine will use to create temp tables etc.
# If specified it must be a colon separated list of dbspaces that exist
# when the Dynamic Server system is brought online. If not specified, or if
# all dbspaces specified are invalid, various ad hoc queries will create
# temporary files in /tmp instead.
DBSPACETEMP # Default temp dbspaces
# DUMP*:
# The following parameters control the type of diagnostics information which
# is preserved when an unanticipated error condition (assertion failure) occurs
# during Dynamic Server operations.
# For DUMPSHMEM, DUMPGCORE and DUMPCORE 1 means Yes, 0 means No.
DUMPDIR /tmp # Preserve diagnostics in this directory
DUMPSHMEM 1 # Dump a copy of shared memory
DUMPGCORE 0 # Dump a core image using 'gcore'
DUMPCORE 0 # Dump a core image (Warning:this aborts Dynamic Server)
DUMPCNT 1 # Number of shared memory or gcore dumps for
# a single user's session
FILLFACTOR 90 # Fill factor for building indexes
# method for Dynamic Server to use when determining current time
USEOSTIME 0 # 0: use internal time(fast), 1: get time from OS(slow)
# Parallel Database Queries (pdq)
MAX_PDQPRIORITY 100 # Maximum allowed pdqpriority
DS_MAX_QUERIES # Maximum number of decision support queries
DS_TOTAL_MEMORY # Decision support memory (Kbytes)
DS_MAX_SCANS 1048576 # Maximum number of decision support scans
DATASKIP off # List of dbspaces to skip
# OPTCOMPIND
# 0 =>; Nested loop joins will be preferred (where
# possible) over sortmerge joins and hash joins.
# 1 =>; If the transaction isolation mode is not
# "repeatable read", optimizer behaves as in (2)
# below. Otherwise it behaves as in (0) above.
# 2 =>; Use costs regardless of the transaction isolation
# mode. Nested loop joins are not necessarily
# preferred. Optimizer bases its decision purely
# on costs.
OPTCOMPIND 2 # To hint the optimizer
ONDBSPACEDOWN 2 # Dbspace down option: 0 = CONTINUE, 1 = ABORT, 2 = WAIT
LBU_PRESERVE 0 # Preserve last log for log backup
OPCACHEMAX 0 # Maximum optical cache size (Kbytes)
# HETERO_COMMIT (Gateway participation in distributed transactions)
# 1 =>; Heterogeneous Commit is enabled
# 0 (or any other value) =>; Heterogeneous Commit is disabled
HETERO_COMMIT 0
# Optimization goal: -1 = ALL_ROWS(Default), 0 = FIRST_ROWS
OPT_GOAL -1
# Optimizer DIRECTIVES ON (1/Default) or OFF (0)
DIRECTIVES 1
# Status of restartable restore
RESTARTABLE_RESTORE off
-------------------------------------------------------------------
sqlhosts文件
db1 onipcshm localhost db1_shm
db1_ali ontlitcp infsrv db1_svc |
|
免费注册
发表于 2004-06-05 09:15
