- 论坛徽章:
- 0
|
回复 7# 无牙
没有dmp信息, 下面是dmesg的完整信息看看有没有用?
Jun 9 10:08
Found adjacent data tr. Growing size. 0x30da000 -> 0x70da000.
Pinned PDK malloc pool: base: 0xe000000100f26000 size=115560K
Loaded ACPI revision 2.0 tables.
MMIO on this platform supports Write Coalescing.
MFS is defined: base= 0xe000000100f26000 size= 8064 KB
Unpinned PDK malloc pool: base: 0xe000000110000000 size=524288K
NOTICE: cachefs_link(): File system was registered at index 5.
NOTICE: nfs3_link(): File system was registered at index 8.
NOTICE: mod_fs_reg: Cannot retrieve configured loading phase from KRS for module: cifs. Setting to load at INIT
LLT INFO V-14-1-10009 LLT Protocol available
GAB INFO V-15-1-20021 GAB available
vxfen: vxfen protocol available
0 sba
0/0 lba
0/0/1/0 rmp3f01
0/0/1/1 rmp3f01
0/0/1/2 asio0
0/0/2/0 UsbOhci
NOTICE: USB device attached. Identification String:
Devices/Device/USB/Standard/hp/Unknown/0_1
<2.1.3.10.1008.4390.1>
0/0/2/0.0 UsbMiniBus
NOTICE: USB device attached. Identification String:
Devices/Keyboard/USB/Boot/hp/Unknown/0_1
<2.305.3.100.1008.4390.1>
0/0/2/0.0.0 UsbBootKeyboard
NOTICE: USB device attached. Identification String:
Devices/Mouse/USB/Standard/hp/Unknown/0_1
<2.307.3.10.1008.4390.1>
0/0/2/1 UsbOhci
NOTICE: USB device attached. Identification String:
Devices/Device/USB/Standard/hp/Multibay/0_a1
<2.1.3.10.1008.294.161>
0/0/2/1.0 UsbMiniBus
NOTICE: USB device attached. Identification String:
Devices/MassStorage-SCSI/USB/BulkOnly/hp/Multibay/0_a1
<2.310.3.150.1008.294.161>
0/0/2/1.0.0 UsbBulkOnlyMS
NOTICE: USB device attached. Identification String:
Devices/ScsiControllerAdaptor/USB/BulkOnly/hp/Multibay
<2.1000.3.150.1008.294>
0/0/2/1.0.16 UsbScsiAdaptor
0/0/2/1.0.16.0 tgt
0/0/2/1.0.16.0.0 sdisk
0/0/2/1.0.16.7 tgt
0/0/2/1.0.16.7.0 sctl
NOTICE: USB device attached. Identification String:
Devices/Device/USB/Standard/Avocent/KVMAdaptor/1_0
<2.1.3.10.1572.833.256>
0/0/2/1.1 UsbMiniBus
NOTICE: USB device attached. Identification String:
Devices/Keyboard/USB/Boot/Avocent/KVMAdaptor/1_0
<2.305.3.100.1572.833.256>
0/0/2/1.1.0 UsbBootKeyboard
NOTICE: USB device attached. Identification String:
Devices/Mouse/USB/Boot/Avocent/KVMAdaptor/1_0
<2.307.3.100.1572.833.256>
0/0/2/1.1.1 UsbBootMouse
0/0/2/2 UsbEhci
0/0/4/0 gvid_core
0/1 lba
0/2 lba
0/3 gh2p
0/3/0/0 PCItoPCI
fclp0: Claiming Fibre Channel HBA port at hardware path 0/3/0/0/0/0
0/3/0/0/0/0 fclp
0/4 lba
0/4/2/0 iether
0/4/2/1 iether
0/5 lba
0/6 gh2p
0/6/0/0 PCItoPCI
0/6/0/0/0/0 PCItoPCI
0/6/0/0/0/0/2/0 PCItoPCI
0/6/0/0/0/0/4/0 PCItoPCI
CISS: RAID SA controller on hardware path 0/6/0/0/0/0/4/0/0/0 is now online.
0/6/0/0/0/0/4/0/0/0 ciss
0/7 gh2p
0/7/0/0 PCItoPCI
fclp1: Claiming Fibre Channel HBA port at hardware path 0/7/0/0/0/0
0/7/0/0/0/0 fclp
120 processor
121 processor
122 processor
123 processor
124 processor
125 processor
126 processor
127 processor
250 pdh
250/0 ipmi
250/1 asio0
250/2 acpi_node
0/6/0/0/0/0/4/0/0/0.0 tgt
0/6/0/0/0/0/4/0/0/0.0.0 sdisk
0/3/0/0/0/0.1 fclp_fcp
0/3/0/0/0/0.1.0.0.0 fclp_vbus
0/3/0/0/0/0.1.0.255.0 fclp_vbus
0/3/0/0/0/0.1.1.0.0 fclp_vbus
0/3/0/0/0/0.1.1.255.0 fclp_vbus
0/3/0/0/0/0.1.2.0.0 fclp_vbus
0/3/0/0/0/0.1.2.255.0 fclp_vbus
0/3/0/0/0/0.1.3.0.0 fclp_vbus
0/3/0/0/0/0.1.3.255.0 fclp_vbus
0/3/0/0/0/0.1.0.0.0.0 tgt
0/3/0/0/0/0.1.0.255.0.0 tgt
0/3/0/0/0/0.1.1.0.0.0 tgt
0/3/0/0/0/0.1.1.255.0.0 tgt
0/3/0/0/0/0.1.2.0.0.0 tgt
0/3/0/0/0/0.1.2.255.0.0 tgt
0/3/0/0/0/0.1.1.0.0.0.0 sctl
0/3/0/0/0/0.1.0.0.0.0.0 sctl
0/3/0/0/0/0.1.0.255.0.0.0 sctl
0/3/0/0/0/0.1.1.255.0.0.0 sctl
0/3/0/0/0/0.1.2.0.0.0.0 sctl
0/3/0/0/0/0.1.2.255.0.0.0 sctl
0/3/0/0/0/0.1.3.0.0.0 tgt
0/3/0/0/0/0.1.1.0.0.0.1 sdisk
0/3/0/0/0/0.1.2.0.0.0.1 sdisk
0/3/0/0/0/0.1.0.0.0.0.1 sdisk
0/3/0/0/0/0.1.3.255.0.0 tgt
0/3/0/0/0/0.1.3.0.0.0.0 sctl
0/3/0/0/0/0.1.1.0.0.0.2 sdisk
0/3/0/0/0/0.1.2.0.0.0.2 sdisk
0/3/0/0/0/0.1.0.0.0.0.2 sdisk
0/3/0/0/0/0.1.3.255.0.0.0 sctl
0/3/0/0/0/0.1.1.0.0.0.3 sdisk
0/3/0/0/0/0.1.2.0.0.0.3 sdisk
0/3/0/0/0/0.1.0.0.0.0.3 sdisk
0/3/0/0/0/0.1.3.0.0.0.1 sdisk
0/3/0/0/0/0.1.3.0.0.0.2 sdisk
0/3/0/0/0/0.1.3.0.0.0.3 sdisk
0/7/0/0/0/0.1 fclp_fcp
0/7/0/0/0/0.1.0.0.0 fclp_vbus
0/7/0/0/0/0.1.0.255.0 fclp_vbus
0/7/0/0/0/0.1.1.0.0 fclp_vbus
0/7/0/0/0/0.1.1.255.0 fclp_vbus
0/7/0/0/0/0.1.2.0.0 fclp_vbus
0/7/0/0/0/0.1.2.255.0 fclp_vbus
0/7/0/0/0/0.1.3.0.0 fclp_vbus
0/7/0/0/0/0.1.3.255.0 fclp_vbus
0/7/0/0/0/0.1.0.0.0.0 tgt
0/7/0/0/0/0.1.0.255.0.0 tgt
0/7/0/0/0/0.1.1.0.0.0 tgt
0/7/0/0/0/0.1.1.255.0.0 tgt
0/7/0/0/0/0.1.2.0.0.0 tgt
0/7/0/0/0/0.1.2.255.0.0 tgt
0/7/0/0/0/0.1.3.0.0.0 tgt
0/7/0/0/0/0.1.3.255.0.0 tgt
0/7/0/0/0/0.1.0.0.0.0.0 sctl
0/7/0/0/0/0.1.0.255.0.0.0 sctl
0/7/0/0/0/0.1.1.0.0.0.0 sctl
0/7/0/0/0/0.1.1.255.0.0.0 sctl
0/7/0/0/0/0.1.2.0.0.0.0 sctl
0/7/0/0/0/0.1.2.255.0.0.0 sctl
0/7/0/0/0/0.1.3.0.0.0.0 sctl
0/7/0/0/0/0.1.3.255.0.0.0 sctl
0/7/0/0/0/0.1.0.0.0.0.1 sdisk
0/7/0/0/0/0.1.1.0.0.0.1 sdisk
0/7/0/0/0/0.1.2.0.0.0.1 sdisk
0/7/0/0/0/0.1.3.0.0.0.1 sdisk
0/7/0/0/0/0.1.0.0.0.0.2 sdisk
0/7/0/0/0/0.1.1.0.0.0.2 sdisk
0/7/0/0/0/0.1.2.0.0.0.2 sdisk
0/7/0/0/0/0.1.3.0.0.0.2 sdisk
0/7/0/0/0/0.1.0.0.0.0.3 sdisk
0/7/0/0/0/0.1.1.0.0.0.3 sdisk
0/7/0/0/0/0.1.2.0.0.0.3 sdisk
0/7/0/0/0/0.1.3.0.0.0.3 sdisk
0/6/0/0/0/0/4/0/0/0.7 tgt
0/6/0/0/0/0/4/0/0/0.7.0 sctl
Boot device's HP-UX HW path is: 0/6/0/0/0/0/4/0/0/0.0.0
System Console is on the ITE
iether0: INITIALIZING HP AB352-60003 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/4/2/0
iether1: INITIALIZING HP AB352-60003 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/4/2/1
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 33554432
Dump device table: (start & size given in 1-Kbyte blocks)
entry 0000000000000000 - major is 31, minor is 0x10000; start = 2349940, size = 16777212
Starting the STREAMS daemons-phase 1
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 33522984 Kbytes, lockable: 26892176 Kbytes, available: 30962240 Kbytes
NOTICE: MOD: modld: Module already loaded
NOTICE: MOD: modld: Module already loaded
NOTICE: MOD: modld: Module already loaded
NOTICE: VxVM vxdmp V-5-0-34 added disk array OTHER_DISKS, datype = OTHER_DISKS
NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk
NOTICE: VxVM vxdmp V-5-3-1700 dmpnode 1/0x0 has migrated from enclosure FAKE_ENCLR_SNO to enclosure OTHER_DISKS
fclp driver at 0/7/0/0/0/0 (/dev/fclp1) : has detected an unexpected condition on the HBA.
Driver will attempt to auto-recover from this condition.
fclp driver at 0/7/0/0/0/0 (/dev/fclp1) : has successfully recovered.
fclp driver at 0/7/0/0/0/0 (/dev/fclp1) : has detected an unexpected condition on the HBA.
Driver will attempt to auto-recover from this condition.
fclp driver at 0/7/0/0/0/0 (/dev/fclp1) : has successfully recovered.
fclp driver at 0/3/0/0/0/0 (/dev/fclp0) : has detected an unexpected condition on the HBA.
Driver will attempt to auto-recover from this condition.
fclp driver at 0/3/0/0/0/0 (/dev/fclp0) : has successfully recovered.
fclp driver at 0/3/0/0/0/0 (/dev/fclp0) : has detected an unexpected condition on the HBA.
Driver will attempt to auto-recover from this condition.
fclp driver at 0/3/0/0/0/0 (/dev/fclp0) : has successfully recovered.
fclp driver at 0/7/0/0/0/0 (/dev/fclp1) : has detected an unexpected condition on the HBA.
Driver will attempt to auto-recover from this condition.
fclp driver at 0/7/0/0/0/0 (/dev/fclp1) : has successfully recovered.
fclp driver at 0/7/0/0/0/0 (/dev/fclp1) : has detected an unexpected condition on the HBA.
Driver will attempt to auto-recover from this condition.
fclp driver at 0/7/0/0/0/0 (/dev/fclp1) : has successfully recovered.
fclp driver at 0/7/0/0/0/0 (/dev/fclp1) : has detected an unexpected condition on the HBA.
Driver will attempt to auto-recover from this condition.
fclp driver at 0/7/0/0/0/0 (/dev/fclp1) : has successfully recovered.
fclp driver at 0/7/0/0/0/0 (/dev/fclp1) : has detected an unexpected condition on the HBA.
Driver will attempt to auto-recover from this condition.
fclp driver at 0/7/0/0/0/0 (/dev/fclp1) : has successfully recovered.
NOTICE: VxVM vxio V-5-0-922 rderr3_childdone: read error on object oradata02-01 of mirror voldata-02 in volume voldata (start 123734072 length corrected
NOTICE: VxVM vxio V-5-0-922 rderr3_childdone: read error on object oradata02-01 of mirror voldata-02 in volume voldata (start 123734528 length 64) corrected |
|