Sun Cluster问题

solphin

Boot device: disk  File and args:
SunOS Release 5.10 Version Generic_118833-20 64-bit
Copyright 1983-2006 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Hostname: wsdp2
Booting as part of a cluster
NOTICE: CMM: Node wsdp1 (nodeid = 1) with votecount = 1 added.
NOTICE: CMM: Node wsdp2 (nodeid = 2) with votecount = 1 added.
NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d4s2) added; votecount = 1, bitmask of nodes with configured paths = 0x3.
NOTICE: clcomm: Adapter ipge5 constructed
NOTICE: clcomm: Path wsdp2:ipge5 - wsdp1:ipge5 being constructed
NOTICE: clcomm: Adapter ipge2 constructed
NOTICE: clcomm: Path wsdp2:ipge2 - wsdp1:ipge2 being constructed
NOTICE: CMM: Node wsdp2: attempting to join cluster.
NOTICE: clcomm: Path wsdp2:ipge2 - wsdp1:ipge2 errors during initiation
NOTICE: clcomm: Path wsdp2:ipge5 - wsdp1:ipge5 errors during initiation
WARNING: Path wsdp2:ipge2 - wsdp1:ipge2 initiation encountered errors, errno = 62. Remote node may be down or unreachable through this path.
WARNING: Path wsdp2:ipge5 - wsdp1:ipge5 initiation encountered errors, errno = 62. Remote node may be down or unreachable through this path.
NOTICE: CMM: Quorum device 1 (gdevname /dev/did/rdsk/d4s2) can not be acquired by the current cluster members. This quorum device is held by node 1.
NOTICE: CMM: Cluster doesn't have operational quorum yet; waiting for quorum.





备机需要更换备件，更换完在重启时就报这样的错误，是什么原因造成的？

solphin

在线等、、、、、求助蜘蛛大哥、、、

easybegin

回复 1# solphin


     This quorum device is held by node 1.


你的仲裁盘呗节点1抓住了，必须先启动节点1，否则你现在的节点2没法单独启动进入cluster工作模式。

solphin

回复 3# easybegin


    WARNING: Path wsdp2:ipge2 - wsdp1:ipge2 initiation encountered errors, errno = 62. Remote node may be down or unreachable through this path.
WARNING: Path wsdp2:ipge5 - wsdp1:ipge5 initiation encountered errors, errno = 62. Remote node may be down or unreachable through this path.
那这个警告是什么意思？

easybegin

回复 4# solphin


    你仲裁盘被节点1抓住，整个双机进不了cluster工作模式，所以这个信息告诉你cluster的心跳不通。

easybegin

回复 4# solphin


    估计你是关闭了两台机器后更换的备件，仲裁盘在哪个节点上，就必须先启动这个节点，否则另一个节点也没法启动的。

easybegin

回复 4# solphin


    你要是怕有失误，可以先boot -x启动非cluster模式，两个节点都做这个，检查软硬件等没有其他错误后，在重新先reboot节点1（拥有仲裁盘的节点），等启动后，再reboot节点2； 或者同时reboot两个节点。你可以参考一下。

easybegin

Node wsdp1 (nodeid = 1)
Node wsdp2 (nodeid = 2)


这是节点1和2对应的主机名。

solphin

回复 6# easybegin


    仲裁在第一台机器上面，我关机更换的第二台机器的硬件，再次启动就报这个错了、

easybegin

回复 9# solphin


    那你现在第一台机器启动着没有啊？