免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 2056 | 回复: 0
打印 上一主题 下一主题

出售IBM 5706网卡 00p6131 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2011-09-26 16:27 |只看该作者 |倒序浏览
ibm 5706网卡 00p6131



- PCI-X 1Gbps Ethernet-TX IOA
The IBM #5706 is a 2-port 1000/100/10Mbps Base-TX Ethernet PCI-X Adapter. The #5706 is a Full Duplex, dual ported, Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run either port at 1000, 100, or 10 Mbps data rate. This adapter interfaces to the system via a PCI or PCI-X bus and connects to a network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The #5706 also supports jumbo frames when running at the 1000 Mbps speed.
i5/OS V5R3 does not support a #5706 function called Large Send or sometimes known as TCP Segmentation. This function offloads the TCP segmentation operation from the IP layer to the adapter for outgoing (transmit side) TCP segments.
i5/OS V5R3 does not support a #5706 function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter.
The #5706 does not support SNA.
The #5706 does not require a PCI IOP, even in an i5/OS partition.
Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible.
Limitations: The 1000 Mbps speed is not supported in Half Duplex (HDX) mode.
? Attributes provided: Two full-duplex 1000/100/10Base-TX UTP connections to Gigabit Ethernet LANs.
? Attributes required: One 3 volt PCI or PCI-X card slot (either long or short)

购买联系电话:010-51657781-808  吴经理
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP