- 论坛徽章:
- 0
|
本帖最后由 oushitianxia 于 2012-05-11 15:45 编辑
在未装系统前已经在机器上做好了陈列，
我嫌FORMAT分区麻烦，
下面的分区要求我如何FORMAT分啊？？
/ 剩余
/usr 10G（推荐不小于10G）
/var 10G（推荐不小于10G）
swap 推荐物理内存2倍
/radius 根据实际情况划分，存放radius程序）
/radius/radius_data 根据实际情况划分，存放radius日志文件
/radius_backup 29G 根据实际情况划分，存放radius主机备份文件
以下的步骤我可以OK状态下，BOOT FROM CDROM安装系统的同时分区吗？T5120不支持图形界面，我怎么分区啊？
Skipped interface e1000g2
Attempting to configure interface e1000g1...
Skipped interface e1000g1
Attempting to configure interface e1000g0...
Skipped interface e1000g0
Requesting System Maintenance Mode
SINGLE USER MODE
# raidctl
Controller: 1
Disk: 0.0.0
Disk: 0.1.0
# raidctl -c -r 1 0.0.0 0.1.0
Invalid argument(s).
# raidctl -l c1t0d0
Device not found.
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN300G cyl 46873 alt 2 hd 20 sec 625>
/pci@0/pci@0/pci@2/scsi@0/sd@0,0
1. c1t1d0 <SUN300G cyl 46873 alt 2 hd 20 sec 625>
/pci@0/pci@0/pci@2/scsi@0/sd@1,0
Specify disk (enter its number): ^C
# raidctl -c -r 1 c1t0d0 c1t1d0
Creating RAID volume will destroy all data on spare space of member disks, proceed (yes/no)? yes
/pci@0/pci@0/pci@2/scsi@0 (mpt0):
Physical disk 0 created.
/pci@0/pci@0/pci@2/scsi@0 (mpt0):
Physical disk 1 created.
/pci@0/pci@0/pci@2/scsi@0 (mpt0):
Volume 0 created.
WARNING: /pci@0/pci@0/pci@2/scsi@0 (mpt0):
Volume 0 is degraded
/pci@0/pci@0/pci@2/scsi@0 (mpt0):
Physical disk (target 1) is |out of sync||online|
/pci@0/pci@0/pci@2/scsi@0 (mpt0):
Volume 0 is |enabled||degraded|
/pci@0/pci@0/pci@2/scsi@0 (mpt0):
Volume 0 is |enabled||resyncing||degraded|
WARNING: /pci@0/pci@0/pci@2/scsi@0/sd@0,0 (sd4):
Corrupt label - bad geometry
Label says 585925000 blocks; Drive says 585805824 blocks
WARNING: /pci@0/pci@0/pci@2/scsi@0/sd@0,0 (sd4):
Corrupt label - bad geometry
Label says 585925000 blocks; Drive says 585805824 blocks
Volume c1t0d0 is created successfully!
# raidctl -l c1t0d0
Volume Size Stripe Status Cache RAID
Sub Size Level
Disk
----------------------------------------------------------------
c1t0d0 279.3G N/A SYNC OFF RAID1
0.0.0 279.3G GOOD
0.1.0 279.3G GOOD
# raidctl -l c1t0d0
Volume Size Stripe Status Cache RAID
Sub Size Level
Disk
----------------------------------------------------------------
c1t0d0 279.3G N/A SYNC OFF RAID1
0.0.0 279.3G GOOD
0.1.0 279.3G GOOD
# raidctl -l c1t0d0
Volume Size Stripe Status Cache RAID
Sub Size Level
Disk
----------------------------------------------------------------
c1t0d0 279.3G N/A SYNC OFF RAID1
0.0.0 279.3G GOOD
0.1.0 279.3G GOOD
# raidctl -l c1t0d0
Volume Size Stripe Status Cache RAID
Sub Size Level
Disk
----------------------------------------------------------------
c1t0d0 279.3G N/A SYNC OFF RAID1
0.0.0 279.3G GOOD
0.1.0 279.3G GOOD
# format
Searching for disks...WARNING: /pci@0/pci@0/pci@2/scsi@0/sd@0,0 (sd4):
Corrupt label - bad geometry
Label says 585925000 blocks; Drive says 585805824 blocks
WARNING: /pci@0/pci@0/pci@2/scsi@0/sd@0,0 (sd4):
Corrupt label - bad geometry
Label says 585925000 blocks; Drive says 585805824 blocks
done
c1t0d0: configured with capacity of 278.99GB
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 32 sec 279>
/pci@0/pci@0/pci@2/scsi@0/sd@0,0
Specify disk (enter its number): ^C
# init 0
# syncing file systems... done
Program terminated
SPARC Enterprise T5120, No Keyboard
Copyright (c) 1998, 2011, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.32.5, 16256 MB memory available, Serial #99167188.
Ethernet address 0:21:28:e9:2b:d4, Host ID: 85e92bd4.
{0} ok
{0} ok
{0} ok |
|
免费注册
发表于 2012-05-11 00:48
