- 论坛徽章:
- 0
|
qinggzha 发表于 2012-05-22 16:00 ![]()
我想更改subzone中的路由表，但是在subzone中执行，没有权限。
在global zone 里该如何设置呢？ 求大侠们指 ...
问题是我的subzone 10.84.126.72 从本地ping不同。而10.84.126.71 都可以， 本地IP 192.168.*.*。
路由如下：
72：
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ---------- ---------
default 10.84.126.1 UG 1 3062544
10.84.126.0 10.84.126.72 U 1 32850 nxge0:3
192.168.0.0 10.84.128.1 UG 1 5137
224.0.0.0 10.84.126.72 U 1 0 nxge0:3
127.0.0.1 127.0.0.1 UH 3 42 lo0:2
71：
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ---------- ---------
default 10.84.126.1 UG 1 3062544
10.84.126.0 10.84.126.70 U 1 31 nxge0:1
10.84.126.0 10.84.126.71 U 1 0 nxge0:2
10.84.128.0 10.84.128.70 U 1 781 nxge4:1
192.168.0.0 10.84.128.1 UG 1 5498
224.0.0.0 10.84.126.70 U 1 0 nxge0:1
127.0.0.1 127.0.0.1 UH 1 1684266 lo0:1
traceroute to 10.84.126.72 (10.84.126.72), 30 hops max, 60 byte packets
1 192.168.200.1 (192.168.200.1) 24.382 ms 24.333 ms 24.309 ms
2 192.168.200.12 (192.168.200.12) 1.185 ms 1.235 ms 1.321 ms
3 10.100.100.2 (10.100.100.2) 5.141 ms 5.139 ms 5.113 ms
4 10.100.101.2 (10.100.101.2) 57.876 ms 59.003 ms 58.986 ms
5 10.100.101.1 (10.100.101.1) 75.892 ms 76.245 ms 76.242 ms
6 192.168.9.1 (192.168.9.1) 77.795 ms 79.293 ms 79.251 ms
7 * * *
8 * * *
9 * * *
10 * * *
11 * * *
12 *^C
traceroute to 10.84.126.71 (10.84.126.71), 30 hops max, 60 byte packets
1 192.168.200.1 (192.168.200.1) 45.235 ms 45.200 ms 45.185 ms
2 192.168.200.12 (192.168.200.12) 1.068 ms 1.356 ms 1.469 ms
3 10.100.100.2 (10.100.100.2) 4.517 ms 4.523 ms 4.498 ms
4 10.100.101.2 (10.100.101.2) 57.469 ms 57.702 ms 57.692 ms
5 10.100.101.1 (10.100.101.1) 73.935 ms 74.128 ms 74.103 ms
6 192.168.9.1 (192.168.9.1) 75.773 ms 77.214 ms 76.974 ms
7 10.84.126.71 (10.84.126.71) 74.929 ms 73.976 ms 73.933 ms |
|
免费注册
发表于 2012-05-22 16:00