- 论坛徽章:
- 0
|
本帖最后由 yxwlovefyj 于 2012-07-06 14:48 编辑
今天搞T2000自检发现2个PCI槽位报错，可是从ALOM里看不出，反而有两个参数不正常，请问PDB/T_AMB和PDB/ADT7462_AMB代表的是什么。以下是故障信息请帮忙判断下，谢谢！
sc> showenvironment
=============== Environmental Status ===============
--------------------------------------------------------------------------------
System Temperatures (Temperatures in Celsius):
--------------------------------------------------------------------------------
Sensor Status Temp LowHard LowSoft LowWarn HighWarn HighSoft HighHard
--------------------------------------------------------------------------------
PDB/T_AMB UNKNOWN -- -- -- -- -- -- --
PDB/ADT7462_AMB UNKNOWN -- -- -- -- -- -- --
MB/T_AMB OK 29 -- -- -- -- -- --
MB/CMP0/T_TCORE OK 46 -10 -5 0 95 101 105
MB/CMP0/T_BCORE OK 46 -10 -5 0 95 101 105
IOBD/IOB/T_CORE OK 44 -10 -5 0 95 100 105
IOBD/T_AMB OK 32 -- -- -- -- -- --
--------------------------------------------------------
System Indicator Status:
--------------------------------------------------------
SYS/LOCATE SYS/SERVICE SYS/ACT
--------------------------------------------------------
OFF ON ON
--------------------------------------------
System Disks:
--------------------------------------------
Disk Status Service OK2RM
--------------------------------------------
HDD0 NOT PRESENT OFF OFF
HDD1 NOT PRESENT OFF OFF
----------------------------------------------------------
Fans (Speeds Revolution Per Minute):
----------------------------------------------------------
Sensor Status Speed Warn Low
----------------------------------------------------------
--------------------------------------------------------------------------------
Voltage sensors (in Volts):
--------------------------------------------------------------------------------
Sensor Status Voltage LowSoft LowWarn HighWarn HighSoft
--------------------------------------------------------------------------------
MB/V_+1V5 OK 1.48 1.36 1.39 1.60 1.63
MB/V_VMEML OK 1.78 1.63 1.67 1.92 1.98
MB/V_VMEMR OK 1.78 1.63 1.67 1.92 1.98
MB/V_VTTL OK 0.87 0.81 0.83 0.96 0.99
MB/V_VTTR OK 0.87 0.81 0.83 0.96 0.99
MB/V_+3V3STBY OK 3.33 3.13 3.16 3.53 3.59
MB/V_VCORE OK 1.32 1.20 1.24 1.36 1.39
IOBD/V_+1V5 OK 1.47 1.36 1.39 1.60 1.63
IOBD/V_+1V8 OK 1.76 1.63 1.67 1.92 1.96
IOBD/V_+3V3MAIN OK 3.36 3.06 3.10 3.49 3.53
IOBD/V_+3V3STBY OK 3.33 3.13 3.16 3.53 3.59
IOBD/V_+1V OK 1.18 1.09 1.11 1.28 1.30
IOBD/V_+1V2 OK 1.16 1.09 1.11 1.28 1.30
IOBD/V_+5V OK 5.12 4.55 4.75 5.35 5.45
IOBD/V_-12V OK -12.11 -13.08 -12.84 -11.16 -10.92
IOBD/V_+12V OK 12.06 10.92 11.16 12.84 13.08
SC/BAT/V_BAT OK 3.03 -- 2.25 -- --
-----------------------------------------------------------
System Load (in amps):
-----------------------------------------------------------
Sensor Status Load Warn Shutdown
-----------------------------------------------------------
MB/I_VCORE OK 28.080 80.000 88.000
MB/I_VMEML OK 10.500 60.000 66.000
MB/I_VMEMR OK 11.700 60.000 66.000
-----------------------------------------------------------
----------------------
Current sensors:
----------------------
Sensor Status
----------------------
IOBD/I_USB0 OK
IOBD/I_USB1 OK
------------------------------------------------------------------------------
Power Supplies:
------------------------------------------------------------------------------
Supply Status Underspeed Overtemp Overvolt Undervolt Overcurrent
------------------------------------------------------------------------------
PS0 OK OFF OFF OFF OFF OFF
PS1 OK OFF OFF OFF OFF OFF
--------------------------------------------
System Alarms:
--------------------------------------------
Alarm Relay LED
--------------------------------------------
ALARM/CRITICAL ON OFF
ALARM/MAJOR OFF OFF
ALARM/MINOR OFF OFF
ALARM/USER OFF OFF
sc> console
Enter #. to return to ALOM.
#>#> ?
{0} ok
{0} ok
{0} ok reset-all
SC Alert: Host System has Reset
\
WARNING: PCIe link width not set to x4 on J2100 !!!
WARNING: PCIe link width not set to x4 on J2201 !!!
Netra T2000, No Keyboard
Copyright 2008 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.28.9, 16256 MB memory available, Serial #82998046.
Ethernet address 0:14:4f:f2:73:1e, Host ID: 84f2731e.
ERROR: The following devices are disabled:
IOBD/PCI-BRIDGE1
IOBD/PCI-BRIDGE3
Aborting auto-boot sequence.
{0} ok |
|
免费注册
发表于 2012-07-06 14:38
