- 论坛徽章:
- 0
|
本帖最后由 wz0020199 于 2012-07-24 13:55 编辑
SPARC Enterprise T5220, No Keyboard
Copyright 2008 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.28.0, 8064 MB memory available, Serial #85189022.
Ethernet address 0:21:28:13:e1:9e, Host ID: 8513e19e.
ERROR: The following devices are disabled:
MB/PCIE-IO/USB
MB/GBE0
MB/GBE1
-> set /SYS/MB/PCIE-IO/USB component_state=enabled
MB/PCIE-IO/USB has been enabled. Changes will only go into effect the next time the host is powercycled
Set 'component_state' to 'enabled'
-> set /SYS/MB/GBE0 component_state=enabled
MB/GBE0 has been enabled. Changes will only go into effect the next time the host is powercycled
Set 'component_state' to 'enabled'
-> set /SYS/MB/GBE1 component_state=enabled
MB/GBE1 has been enabled. Changes will only go into effect the next time the host is powercycled
Set 'component_state' to 'enabled'
{0} ok boot -r
ERROR: boot-read fail
Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@1 File and args: -r
ERROR: boot-read fail
Can't open boot device
都enable 了还是启动不了 求各位诊断下是什么原因。谢谢!! |
|